New Protocol Gateways Able to Drive Selected Cameras to Presets Automatically
Custom driver for XProtect CCTV system allows a building control system to have control over relays and groups. Allows any remote system to send event/command strings to the Xprotect system. Can be used in building control system to drive a particular camera to a preset location and focus.
Read More »
New EasyCollar and DeflectAir are Molded from Class II Fire Resistant Resin in Standard Matte Finish
EasyCollar is a one-piece collar, molded from glass fiber reinforced plastic. Comes in three sizes and available in depths of 2, 4, 6, 8, 10, 12-inch (50, 100, 150, 200, 250, 300 mm). 48-inch-square U3 model replaces two 24” x 48” tiles in a T-bar ceiling grid, facilitating cassette placement.
Read More »
New EasyCollar and DeflectAir are Molded from Class II Fire Resistant Resin in Standard Matte Finish
EasyCollar is a one-piece collar, molded from glass fiber reinforced plastic. Comes in three sizes and available in depths of 2, 4, 6, 8, 10, 12-inch (50, 100, 150, 200, 250, 300 mm). 48-inch-square U3 model replaces two 24” x 48” tiles in a T-bar ceiling grid, facilitating cassette placement.
Read More »
L-com Introduces IP68-Rated USB 2.0 Cable Assemblies and Panel-mount Coupler for Harsh and Industrial Applications
U3A00064-series cables has a USB 2.0, Type-C IP68-rated connector on one end and a standard USB 2.0 Type-A connector on the other. Features gold-plated contacts that stand up to repeated mating cycles, 32/24/28 AWG cable. U3B00001 coupler features threaded couplings and an O-ring seal ensuring protection against water and dust.
Read More »
The Ultimate Guide To UV Disinfection Lighting
This white paper provides a guide to UV disinfection lighting and their benefits over alternative disinfection methods.
Read More »
L-com Introduces IP68-Rated USB 2.0 Cable Assemblies and Panel-mount Coupler for Harsh and Industrial Applications
U3A00064-series cables has a USB 2.0, Type-C IP68-rated connector on one end and a standard USB 2.0 Type-A connector on the other. Features gold-plated contacts that stand up to repeated mating cycles, 32/24/28 AWG cable. U3B00001 coupler features threaded couplings and an O-ring seal ensuring protection against water and dust.
Read More »
Stafford Introduces New Shaft Collars and Couplings
Can range from 0.25” to 14” I.D. for shaft collars and 0.25” to 4” I.D. for couplings. Bores can be in hex, round and square with keyways or threads. Face and O.D. can include cams, flanges, flats, knurls, laser etching, levers, slots and tapped through-holes.
Read More »
Stafford Introduces New Shaft Collars and Couplings
Can range from 0.25” to 14” I.D. for shaft collars and 0.25” to 4” I.D. for couplings. Bores can be in hex, round and square with keyways or threads. Face and O.D. can include cams, flanges, flats, knurls, laser etching, levers, slots and tapped through-holes.
Read More »
STI Presents EnviroArmour Enclosures That are IP66 Rated and UL/cUL Listed
Offered in fiberglass or polycarbonate with ventilation options such as A/C with heat, A/C only, heat only, filter fans, drain vent and pressure compensation vents. Fiberglass enclosures are resistant to chemical agents and guard against harsh environments whereas polycarbonate enclosures are impact resistant. Suitable for devices that require protection against rain, sleet, snow, splashing...
Read More »
STI Presents EnviroArmour Enclosures That are IP66 Rated and UL/cUL Listed
Offered in fiberglass or polycarbonate with ventilation options such as A/C with heat, A/C only, heat only, filter fans, drain vent and pressure compensation vents. Fiberglass enclosures are resistant to chemical agents and guard against harsh environments whereas polycarbonate enclosures are impact resistant. Suitable for devices that require protection against rain, sleet, snow, splashing...
Read More »
Ruland Offers Indexing Plungers That are Designed to Lock Pieces of Machinery for Adjustable Positioning
Offered in standard and mini types in variety of inch and metric thread sizes with or without lock-out. Feature pull knob, which partially encloses the top of the plunger body for a consistent performance. Used in industrial equipment for positioning and holding and in medical equipment for height adjustment.
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
