Fasteners & Hardware

Fasteners & Hardware, Machinery & Machining Tools, Material Handling & Storage, Mechanical Components and Assemblies, Mounting & Attaching Products

Zero-Max ETP-EXPAND® Provides Ideal Connection within Hollow Shafts for Pump Drives

Feb 18, 2017

Plymouth, Minnesota: Connecting a rotating piston lobe to a hollow shaft has been improved using the ETP-EXPAND®, a patented bushing device that is fast and easy to install and adjust.

The ETP-EXPAND was developed to simplify exchanging seals in pumps when fluid viscosity is changed. This is often required in pharmaceutical, chemical, food and beverage processing systems with the seal... Read More

Fasteners & Hardware

Aluminum Torque Limiting Knurled Knobs with Steel Threaded Stud Available from J.W. WINCO

Feb 16, 2017

NEW BERLIN, WI - J.W. Winco, Inc., a leading supplier of standard industrial machine components, announced it now offers GN 3663 Aluminum Torque Limiting Knurled Knobs with Steel Threaded Stud.

The RoHS compliant torque limiting knobs are used when manually applied torque is to be limited. When turned clockwise, the torque mechanical system of the knurled knob triggers an... Read More

Fasteners & Hardware

Kwikset Convert™ Wins 2017 Techhome Mark of Excellence Award

Feb 15, 2017

Kwikset’s New Z-Wave™ Smart Lock Conversion Kit Honored as Security Product of the Year

LAKE FOREST, CA (February 13, 2017) – Kwikset brand of Spectrum Brands, Inc. – Hardware and Home Improvement Division, the leader in residential security, announces that its Kwikset Convert™ lock has been awarded a 2017 TechHome Mark of Excellence Award as Security Product of the Year.

... Read More

Fasteners & Hardware

Crest-to-Crest Wave Spring Series are suitable for computer and robotics industries.

Feb 13, 2017

Available in C (imperial) and CM (metric) Series, Crest-to-Crest Wave Spring Series are designed in 0.188 in. and 5 mm diameters. Used in medical, computer and robotics industries, spring can be custom designed for user application up to 0.157 in. or 4 mm diameter.

Read More

Electrical Equipment & Systems, Fasteners & Hardware, Mounting & Attaching Products

CDSH Series Rectangular Inserts eliminate need for special wire preparation.

Feb 13, 2017

Available in 9, 18, 27, 42, 54 and 84 pole configuration, CDSH Series SQUICH Rectangular Inserts offer resistance against strong vibrations. Enabling quick identification of wired and non-wired terminals, connectors can be used with wires up to 2.5 mm^2. Featuring actuator buttons, units are rated to 10 A current and 400 V.

Read More

Fasteners & Hardware

Mechanical Pin Splice

Feb 09, 2017

“Ideal for quick timing belt installation” Not for Drive Belts

Urethane Timing Belt Pitches

• T5, T10, T20, AT5, AT10, AT20

• L, H, XH

• HTD: 5M, 8M, 14M

• STD: 5M, 8M, 14M

Available Belt Widths

Varies depending on the belt pitch.

Please contact our sales department.

Benefits

• Easily installed by hands and... Read More

Fasteners & Hardware

M&S Centerless Grinding Manufacturers Precision Firing Pins for the DOD

Feb 09, 2017

In preparation for a rapid deployment of troops for a broad-based military engagement a primary DOD supplier was contracted to manufacture firing pins for machine guns. The features of the pins were complex and the time frame for completion was extremely tight. Material: Tool Steel HT 50-55Rc. Part geometry was fairly complex - but the project HAD to have highest priority - grinding needed to... Read More

Fasteners & Hardware

806 Series Spring Loaded Pins come with closed flat top.

Feb 03, 2017

Available in 806-22-001-30-0XX191 and 806-22-001-10-00X191 models, 806 series Spring Loaded Pins feature four finger designs for easy removal of caps. 806-22-001-30-0XX191 series are available in nine surface mount options using 0900-X and 0907-X spring pins. 806-22-001-10-00X191 are designed in four through-hole style springs 0906-X. Rated to 2 A continuous current, product comes in 13 in.... Read More

Fasteners & Hardware

PEM® Type SL™ Self-Clinching Steel Locknuts for Thin Metal Assemblies Integrate Unique TRI-DENT® Feature to Hold Mating Screws Tight

Feb 03, 2017

PEM® Type SL™ self-clinching steel locknuts from PennEngineering® integrate a unique TRI-DENT® locking feature to hold mating screws tight over time by providing sufficient torsional resistance to withstand vibration, thermal cycling, and other disruptive forces that could loosen the screws in service. These prevailing torque locknuts, which meet 3 cycle locking performance to effectively... Read More

Fasteners & Hardware

18/3-22/2 AWM2661 Power Cords are 0.26 in. thin.

Jan 30, 2017

Available in bulk, blunt-cut to length, stripped one or both ends, with white, black, or clear braid outer jacket, 18/3-22/2 AWM2661 Power Cords utilize three 18 gauge power conductors and two 22 gauge control wires. 300-volt power cord comes in 0.26 in. thickness with 18 gauge control wires.

Read More

Fasteners & Hardware

TopLine’s Micro-coil Springs (MSC) for CCGAs in Harsh Environments Featured at IPC/APEX EXPO 2017

Jan 28, 2017

Absorbs Extreme Shock CCGA and BGA Components; Novel Interconnect Innovation

Milledgeville, Georgia, USA – TopLine, a leading designer and manufacturer of electronic components and packaging solutions for PCB assemblies, will exhibit its MSC Series of Micro-coil springs, a novel interconnect for CCGA (Ceramic Column Grid Array) IC packages for harsh environments. In tests using daisy... Read More

Fasteners & Hardware

FastSet™ King Ream Pin Kit allows grease to permeate high-wear areas.

Jan 27, 2017

FastSet™ King Pin Ream offers 45 no-ream kits and provides fleets with faster solution for pin replacement. King pin bushings are not reamed after installation into steering knuckle. Eliminating need for reamers, special tools, and presses when replacing kingpins, pins feature groove design and are used in axle applications.

Read More

Fasteners & Hardware

Press-Fit PCB Pins offer high mechanical strength.

Jan 24, 2017

Suitable for solderless PCB terminations on to board, Press-Fit PCB Pins feature multi-faceted geometries. Available in square and hexagon press-fit shapes with diameters ranging in 0.040 in. to 0.80 in., pins allow remainder of the plated through hole barrel to remain intact with board. Pins are used in high current applications, pins are made of brass material.

Read More

Fasteners & Hardware

Leandrum Eco Washer allows easy drum removal.

Jan 23, 2017

Featuring very robust, lower cost option utilizing stainless steel tanks, drum and housing, premium electrical components,   unit is designed for easy maintenance access that will allow easy drum removal with no crane required. With part production rate of 12 CU FT/Hour @ 2PRM design drum speed, machine offers full immersion cleaning, eliminating any need for pumps and nozzles. Machine comes... Read More

Fasteners & Hardware

E3 Vise Action Compression Latch meets NEMA 4 and IP65 standards.

Jan 16, 2017

Delivering robust and vibration-resistant fastening, E3 Vise Action Compression Latch fits into enclosures with interior space constraints. Featuring variety of grip lengths, unit provides secure latching for high vibration environments. Suitable for rugged and outdoor applications, product is available with pre-installed cam options which minimizes installation time.

Read More

Fasteners & Hardware, Portable Tools

Drywall Screw Setter features spin-free screw setter sleeve.

Jan 13, 2017

Driving screws perfectly in drywall, particle board and plywood, Drywall Screw Setter works as dimpler and magnetic holder. Screw Setter features spin-free screw setter sleeve, fastener retention and 1/4 in. quick change shank. Package includes one 2-in-1 combination magnetic bit holder and screw setter with five 1 in. driver bits.

Read More

Fasteners & Hardware, Safety & Security Equipment

R4-05 Micro Rotary Latch offers concealed latching.

Jan 13, 2017

Made of corrosion-resistant steel, R4-05 Micro Rotary Latch provides increased security with greater toughness. Ideally used in applications with space constraints like industrial machinery industries, R4-05 latches minimize protrusion being compact and symmetrical. Latches permit remote actuation rotary systems to be integrated into applications and features bumper to resist vibrations.... Read More

Fasteners & Hardware

GN 612.3 Indexing Plungers feature matte black technopolymer plastic sleeve.

Jan 11, 2017

Offering comfortable finger grip, GN 612.3 Indexing Plungers come with 110°C heat resistant plastic ribbed sleeve. Used in retracting pins, unit’s lever arm can be rotated up to 180°. Designed with stainless steel housing, plunger pin and spring, plunger’s groove allows lever to be held in retracted and non-retracted positions.

Read More

Fasteners & Hardware

Cintec’s Anchor minimizes damage to buildings from seismic activity.

Dec 30, 2016

Ideal for protecting historic buildings in areas of high seismic activity, Dissipative Anchor is designed for use with cintec’s proven wall anchor system. Allowing small amounts of movement through sliding mechanism, unit avoids pull-out damage possibility at anchorage head. Consisting stainless steel anchor body encapsulated in fabric sock, product allows controlled and repairable drift for... Read More

Fasteners & Hardware

H3-EM Swinghandle Reader meets HIPAA, HITECH and PCI DSS requirements.

Dec 23, 2016

Integrated with multi-class RFID, H3-EM Swinghandle Reader reads HID 125 kHz RFID credentials and 13.56 MHz iCLASS® smart card based credentials. Featuring integrated LED indicators for visual status of equipment access, unit offers single-hole panel preparation that is compatible with industry standard enclosures for OEM integration. With access control system connection, reader enables... Read More