New Fasteners & Hardware Products

Draw Latches feature compact, surface-mounted design.

Made with die-cast zinc bodies and stainless steel hardware, fixed-grip draw latches accurately position panels using operating latch that aligns panels and draws them together on same plane. Products also feature over-center latching mechanism to prevent accidental opening under stress or vibration. Measuring less than 7/8 in. high, products leave no exposed hardware on inside of door and...

Detent Pins meet or exceed Mil-P-45952/1.

Kwik-Lok(TM) Heavy Duty Detent Pins are shoulder-style alignment pins for applications that do not require positive locking ball. Heavy-duty spring and 2 spring-loaded stainless steel balls provide high pullout force. Available in stainless steel and alloy steel, units range from 3/16-1 in. and 5-25 mm. Ring is included for attachment of optional lanyard.

Drive Pins reduce slippage in hard turning applications.

Micro-serrated, hard-coated Neidlein face driver drive pins reduce or eliminate part slippage, reduce scrapped parts, and increase turning productivity. If part slips, it will not remove serrations or coating, and pins can be used again. Products achieve circular run outs of less than 0.0007 in. in long production runs. Drive pins can be used with SB/FSB and FFB face drivers and all special...

Locking Pins have double acting design.

Activated by push or pull motion, Kwik-Lok(TM) Double Acting Pins feature corrosion-resistant, solid stainless steel construction and are suited for quick insertion and removal. Products are offered with ring, L, and T handles, and 4 ball configurations are available upon request. Ring is included for attachment of optional lanyard. Standard sizes range from 3/16-1 in. for nominal pin diameters,...

Elastomer Shlastomer, Right? Selecting the Right Elastomer for Your Sealing Boots and Fasteners

Different elastomer formulations affect your parts' physical properties, functions, and service life. Therefore, it's important to test a few different elastomers, when assembling your product, to determine the best one for your needs.

Roller-Screw Assemblies withstand demanding applications.

Series NRS Planetary Roller Screw Assemblies feature high axial resolution with multitude of contact points for carrying large loads. Units operate under shock loads and adverse environmental conditions, with poor lubrication, and after ingesting ice and sand. Assemblies feature nuts with threaded rollers, which are available with integral flange or as cylindrical nut in split preloaded, or...

Compression Latches come in stainless steel or zinc.

Vise Action(TM) Compression Latch series addresses environments in which vibration, noise, and EMI/RFI sealing are of concern. Stainless steel vise action latches, sealed internally and externally, include manually operated knob series in multiple key- and tool-operated versions. Also available, chrome finish option over die-cast zinc material delivers aesthetic appearance of stainless steel...

Helical Ball Nose Insert reduces vibration when cutting.

Designed for use on complex contoured workpieces, WPR-D Insert has free cutting geometry and helical cutting edge that results in incremental entry of cutter, reducing vibration for soft, peeling cut. Due to penetration, cutting edges are always under load for increased stability and further reduced vibration. Equal cutting forces enable milling operations with greater chipping depth and higher...

Friction Springs provide shock absorption.

RING-SpringsÃ-® absorb and dampen high kinetic energy of moving mass in relatively small space, protecting structural components. Design allows them to absorb up to 67% of input energy and return it as heat. Made of spring steel, RING-Springs range from .5-30 in. dia with end forces up to 1 million lb and operating temperatures from -40 to 180Ã-

T-Slot Nuts facilitate alignment in aluminum profiles.

Self-Aligning T-nuts have additional material that fits in t-slot and facilitates alignment, also providing ability to be rolled in at any location along t-slot. Standard t-nuts sit below slot and can flip or turn, but, with self-aligning t-nut, hole is always in center of t-slot. Products are suited for blind installations.

Threaded Inserts provide pullout resistance.

Atlas(TM) Plus+Tite(TM) threaded steel inserts feature prebulbed slotted body design suited for insertion into metal and non-metal sheets as thin as .020 in. During installation, all 4 sides fold down to securely grip backside of sheet. Self-locating shoulder prevents radial play. Inserts provide permanent threads for blind attachment applications. They are available with internal formed threads...

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.