Fasteners & Hardware

Aluminum and Stainless Steel microPEM
Electronic Components & Devices

Aluminum and Stainless Steel microPEM

Aluminum and stainless steel microPEM® TackSert® pins from PennEngineering® provide cost-effective alternatives to micro screws for attaching top panels to base panels or chassis in compact electronic assemblies. They will attach top panels of any material to a base or chassis manufactured from common cast metals (such as magnesium and aluminum) or plastics (such as ABS and printed circuit...

Read More »
GORE meet IECEx and ATEX standards.
Fasteners & Hardware

GORE meet IECEx and ATEX standards.

GORE® PolyVent Ex+ Screws are suitable for non-mining and above-ground applications. Units are made of 1.4404 non-flammable stainless steel and offer high flammability rate UL 94 VTM-0. Products come with silicone O-ring and provide resistance against flame and corrosion and oleophobic and hydrophobic protection. Screw’s PolyVent Ex+ features airflow rate of 1600 ml/min at 70 mbar and ngress...

Read More »
Latches Buying Guides
Sponsored

Latches Buying Guides

Latches are used in countless applications, including securing toolboxes, cooler doors, tailgates, barn doors and cabinets. They are available in several different types with various methods of actuation and holding styles such as cam/twist, hook, pull down/toggle, slam/push to close and slide/swing bolt. Are you unsure of which type of latch you should buy for your application? This guide will go through the various considerations and important attributes to consider before making a latch purchase, including actuation types, intended application and mounting styles. A buying guide is a seamless way to gain insight into which latch will work for you.

Read More »
Clamp-Style Shaft Adapters feature clamp-type female end.
Electrical Equipment & Systems

Clamp-Style Shaft Adapters feature clamp-type female end.

Made from aluminum, steel and stainless steel materials, Clamp-Style Shaft Adapters come in bore sizes ranging from ½ in. to 1-1/4 in. I.D. Units come with male ends which are available in various lengths. Products are offered in step-up and step-down configurations with or without keyways and are suitable for OEM and MRO applications. Adapters come with shaft extensions which are round, square,...

Read More »
HDMI Adapters are RoHS-compliant.
Electrical Equipment & Systems

HDMI Adapters are RoHS-compliant.

HDMI Adapters are suitable for home theater, OEM HDMI designs, professional A/V systems and digital signage applications. Units are available in straight, in-line and right-angle models and feature Type-A, Type-C, Type-D HDMI interfaces. Products are compatible with HD TVs, HDMI hubs, HDMI enabled A/V equipment. Adapters feature gold-plated contacts.

Read More »
Flex Grip: One Closer, four Work Holding Solutions
Communication Systems & Equipment

Flex Grip: One Closer, four Work Holding Solutions

Designed for 4th and 5th axis, rotary indexer and stationary applications, Lexair’s Flex Grip reduces set up times with 10-second collet change capability, and .0002-in. part accuracy. LEXINGTON, KY, November 2017 – Lexair’s New Flex Grip closers are designed for versatility and efficiency, and they are proven to boost productivity for a variety of machining operations including 5-axis,...

Read More »
CONFAST feature mushroom heads.
Fasteners & Hardware

CONFAST feature mushroom heads.

CONFAST®Hammer Drive Anchors are available in ¼ in. diameter and lengths of 1 in., 1-1/4 in., 1-1/2 in. and 2 in. Units come in 10 boxes containing 100 pieces. Product’s body is made of zamac rust resistant material and nail is built using stainless steel material. Drive anchors are suitable for outdoor and wet applications.

Read More »
Molded-in Threaded Inserts are made of 2024 grade aluminum material.
Construction Equipment and Supplies

Molded-in Threaded Inserts are made of 2024 grade aluminum material.

Molded-in Threaded Inserts come with axial grooves which increases torque resistance. Units are available in series 60 blind-end and series 61 through-hole configurations. Designed to be placed in the mold cavity, products offer resistance against corrosion and are lead-free. Inserts come in standard thread sizes of 8-32, 10-24, 1/4-20, and 5/16-18, and M4, M5, M6, and M8 for metric thread sizes.

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics