Mechanical Components and Assemblies

Electronic Door Strike has jaw strength of 2,000 lbs.
Strikes

Electronic Door Strike has jaw strength of 2,000 lbs.

Model SD-995C24, 24-Volt Electronic Door Strike for metal doors, converts cylindrical lock sets to electronic access control locking system. Unit can be used on various cylindrical door locking systems. When used in conjunction with digital keypad, it provides high levels of security without keys. SD-995C24 can be field-programmed for fail-secure or fail-safe operation. Reversible for...

Read More »
Torsional Couplings stop vibration, absorb loads.
Shaft Couplings

Torsional Couplings stop vibration, absorb loads.

LF, LK and LM solve torsional vibration problems common to internal combustion engine driven applications such as pumps, compressors and gen-sets. They absorb shock loads, accommodate misalignment, and handle shifting critical speeds safely above and below normal rpm operating ranges. All are non-lubricated and maintenance-free. Options include pump mounting plates and cast aluminum pump-mounting...

Read More »
Self-Lubricating Bearings are made with Teflon®.
Bearings

Self-Lubricating Bearings are made with Teflon®.

PolyLube(TM) MRP self-lubricating composite journal bearings offer Teflon® fiber technology. They are able to withstand static loads of ~60,000 psi, and ~30,000 psi under dynamic loading. Fiber's oriented Teflon® multi-filaments are primary anti-friction components in bearing's ID. Heat-stabilized bearings have operating temperature range of +/-325°F, and may be used as new or...

Read More »
Drive Chain reduces workplace noise.
Chains

Drive Chain reduces workplace noise.

Low Noise Drive Chain offers spring roller construction, which absorbs impact of sprocket-chain interaction, reducing equipment noise by up to 10 decibels. It is available in sizes 40 through 80, and can directly replace ANSI standard chain for compliance with environmental management standards such as ISO 14000. Chain exceeds ANSI minimum tensile strength requirements and operates with standard...

Read More »
Choosing the Right Material for Your Project
Sponsored

Choosing the Right Material for Your Project

When choosing an appropriate metal material, the range of options is so broad that selecting the correct material for your unique application can be challenging. Different metals have characteristics that can affect weldability, ductility, and formability. Our new eBook outlines the unique properties and applications of popular metals including: Stainless Steel Brass Aluminum Copper Titanium

Read More »
Gasketing/Sealing Material comes in various ratings.
Gaskets

Gasketing/Sealing Material comes in various ratings.

Gasketing and Sealing Line includes UL listed clip-on compression gaskets made of EPDM with NEMA 4 sealing and UV resistance; UL 94 flame retardant clip-on compression profiles with NEMA 4 sealing capability; and EMC conductive coated clip-on EPDM gasket profiles. UL 94 flame retardant neoprene closed-cell sealing tape is available with adhesive backing and internal cross-threading for...

Read More »
Linear Bearing needs no lubricants.
Bearings

Linear Bearing needs no lubricants.

One-Stop Shopping DryLin(R) linear bearing system consists of polymer-lined plain bearings with or without pillow blocks and DryLin(R) S aluminum shafting. It is suited for applications where lubricants are not desired, and wherever contamination due to dirt, dust, sawdust, lint or paper dust hinders operation of linear ball bearings.

Read More »
Clamping Cylinder loads and unloads light parts.
Actuators

Clamping Cylinder loads and unloads light parts.

Twist Clamp has internal mechanism to produce rotary piston motion throughout stroke. By attaching clamp arm, actuator becomes clamping mechanism for light-duty holding applications. Motion rotates clamp arm out of work area for easy loading and unloading of parts. It uses 40mm bore cylinder that produces up to 224 lb of clamping force at maximum pressure of 140 psi. Cylinder body is hard coat...

Read More »
Linear Bearings are made from 100% polymer.
Bearings

Linear Bearings are made from 100% polymer.

Drylin® RJI inch and Drylin® RJM metric polymer linear bearings are directly interchangeable with standard re-circulating ball bearings, and fit into standard pillow blocks. Made from iglide® J material, bearings have low coefficient of friction and shock and vibration dampening, require no external lubrication, and resist corrosion and wear. They are available from stock in...

Read More »
Rollers And Bumpers include additional sizes.
Rolls and Rollers

Rollers And Bumpers include additional sizes.

Solid, finned, and DuraSoft(R) rollers are available with diameters from 1-1/2 to 4 in. diameter and widths of 1, 1-1/4, and 2 in. They come in black neoprene, white nitrile, or polyurethane in durometers from 20 to 95. They also offer standard bearing, precision bearing, shaft drive, and brake roll-clutch bearing mountings. Square and rectangular bumpers are available in black neoprene and...

Read More »
Reverse Expansion Insert presses into plastic hole.
Inserts

Reverse Expansion Insert presses into plastic hole.

Suitable for strengthening plastic joints, Series 18 brass reverse expansion insert is used in applications where bolt enters insert from headless end rather than from headed end. Its head provides high level pull-through resistance and its diamond knurl provides directional torque resistance for bolt installation. Unit does not require any specialized insertion tools, so it can be installed by...

Read More »
Delivery Equipment That Really Delivers
Sponsored

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.

Read More »

All Topics