Mechanical Components and Assemblies

Pipe Couplers form air-tight seal.
Seals

Pipe Couplers form air-tight seal.

New-Matic fabric reinforced, elastomeric couplers inflate to seal around intake and discharge pipes including those that are bent and worn. Couplers have cast aluminum or stainless steel housing, accommodate pipes from 5 to 6 3/8 in., and require only 10 psi to seal. Applications include storage bins, hopper cars and trailers. Couplers provide effective way to control contaminants while adhering...

Read More »
Extensions

Tap Extensions replace extra-length taps.

Style B Tap Extensions can be used for machine and hand tapping. Each extension fits individual tap sizes, and square or round sockets conform to size standards of most tap manufacturers. Close-fitting deep socket of extension supports tap, which is held firmly in place by 2 socket set screws bearing 90° apart on square of tap. Extensions are available individually or in sets that fit 15...

Read More »
Handles, Pulls and Levers

Faceplate Handles are used for CompactPCI equipment.

CP-HP Series Handles are fully compliant to IEEE 1101.10, PICMG 2.16 CompactPCI, VME, and Eurocard specifications. They have dual locating pins which assure horizontal and vertical alignment for wide range of faceplates in applications including electronic enclosures, printed circuit, computer, datacom/telecom, industrial control, security, and test and measurement. Handles are easily mounted...

Read More »
Chains

Lube-free Chain exceeds ANSI specs.

Xceeder Chain has oil-impregnated felt seals that keep dirt out and lubrication in for increased wear life. Drive, conveyor, and attachment chains are available in sizes 40 to 100, are interchangeable with ANSI standard chain, and work with standard sprockets. They handle same maximum loads as ANSI standard chain, and exceed ANSI minimum tensile strength requirements.

Read More »
Plastic Wiper cleans linear guides.
Slides

Plastic Wiper cleans linear guides.

Low friction, oil-filled plastic wiper is standard wiper for company's linear guide family. Seal clears particulate and contaminants from rail as slider is actuated. Wipers are spring-loaded to apply even, consistent wiping action along length of raceways. It is suitable for general industrial applications as well as heavily contaminated areas. Wipers also provide source of lubrication for the...

Read More »
Precision Core Pins are for luer taper applications.
Pins

Precision Core Pins are for luer taper applications.

Rosspunch pins are precision ground for injection molding of plastic luer taper components. Pins are custom made with tolerances to 0.0005 in. length and 0.0001 in. dia. in steps from 0.006 to 0.750 in. They can be made from all common tool and stainless steels in 0.250 to 10 in. lengths. Pins can incorporate ground ends with radii, flats, symbols and odd shapes. They can also be nitrided, TiN...

Read More »
Fiberglass Cabinets meet NEMA requirements.
Enclosures

Fiberglass Cabinets meet NEMA requirements.

Control Series fiberglass cabinets meet NEMA Type 1, 2, 3, 3R, 4, 4X, 12 and 13 specs and are UL-listed and CSA-certified. They have stainless steel hinges, lockable latches and mounting hardware. Closed-cell neoprene gasket encased in continuous channel prevents leakage, creeping or over-compression. Sizes range from 24 x 20 x 9-3/4 in. to 30 x 24 x 11-3/4 in. Accessories include back panels,...

Read More »
Gripping Rails with Clamps improve holding force.
Chucks and Collets

Gripping Rails with Clamps improve holding force.

Pitbull Gripping Rails, with built-in clamps, maintain parallelism on non-ferrous or ferrous parts. Their asymmetric design allows for precision tolerances. Pitbull Gripping Rails also improve holding force of magnetic chucks when used to hold difficult or irregularly shaped ferrous workpieces. They allow users to add extra steel blocking to increase resistance against sliding, and can hold large...

Read More »
Corrugated Containers provide bulk storage.
Containers

Corrugated Containers provide bulk storage.

Round-Corner Corrugated Containers are available in 32 x 40 x 24 in. and 40 x 48 x 24 in. sizes with 4,000 lb capacities. 4-sided units are made of heavy-duty steel with forklift accessibility on all sides. Standard designs come in 12 colors with 1/4 in. universal stacking legs. Containers are optionally available with corner posts that allow incorporation of gates, chutes or wire sides for...

Read More »
Air Coupler meets ISO standard 4414.
Couplings (Fittings)

Air Coupler meets ISO standard 4414.

Safe Air safety air coupler is rated to 232 psi and can be used to protect pneumatics, shop air applications, and other general air handling systems. 2-stage disconnection eliminates pop-off injuries. Stage 1 vents air pressure; stage 2 disconnects coupler. Coupler will not disconnect without manual vent-release step, and it cannot accidentally disconnect. Sizes are 1/4 to 1/2 in., with hose...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics