Mechanical Components and Assemblies

Amplifier powers two channels.
Amplifiers

Amplifier powers two channels.

Model 439 Two-Channel Attenuator-Amplifier has gain range of 118 dB in one dB steps from -78 to +40 dB. Gain is set by front panel rotary encoder and displayed on LCD. Each channel's gain can be set independently or they can be set together. Power amplifier is included to drive stereo headphone for audiometric testing or other use. Clock noise is eliminated by putting microprocessor into sleep...

Read More »
Couplings cover thrust capacities to 400,000 lbs.
Shaft Couplings

Couplings cover thrust capacities to 400,000 lbs.

Suitable for axial adjustment of impeller clearance in vertical pump installations, RA/RAHS Series adjustable couplings offer close-coupled and spacer styles in RA and RAHS type. All styles and types are available in AISI 1045 steel or stainless steel. Rigid hubs with clearance-fit bores and keyways are available in 12 sizes to cover bore requirements ranging from 0.44 to 10.5 in. with square...

Read More »
Heat Shrink Tubing

Heat-Shrinkable Tubing meets new standards.

Revised material formula makes Versafit 3x, V2, and V4 heat-shrinkable tubing meet MIL SPEC-SAE-AMS-DTL-23053/5 Class 1 and 3 and new standard UL 224 VW-1 for heat aging and heat shock. Tubing is free from polybrominated bi-phenyls and polybrominated biphenyl oxides and ethers, simplifying end-life disposal. Applications include insulation and protection of wire bundles and components in...

Read More »
Connecting Links

Alloy Links accept grade 100 and 80 chain.

Master links up to 1 1/4 in. dia accept Coupler links and are embossed with trace code and product code. Load limits for vertical lifts range from 3,360 to 262,240 lbs with 7/16 and 3 1/2 in. links respectively. Alloy master links sub-assemblies working load limits for vertical lifts range from 4,200 to 262,240 lbs. Omegalok(TM) coupler links, available in 9/32, 3/8, 1/2, and 5/8 in. sizes, have...

Read More »
Solid Disk Handwheels resist solvents, oils, and grease.
Hand Wheels

Solid Disk Handwheels resist solvents, oils, and grease.

Elesa(R) Solid Disk Handwheels are available in 2 versions. Phenolic plastic handwheel is available with or without revolving handle. Black-oxide steel hub is supplied blank without bore. Handle has zinc-plated steel, threaded spindle. Reinforced phenolic plastic version with black, glossy finish offers locking, retractable, steel handle with black-oxide finish. Steel, molded-in hub is blank...

Read More »
Linear Bushings work in one-armed robots.
Bushings

Linear Bushings work in one-armed robots.

STAR Torque-Resistant Linear Bushings are suitable for applications requiring shaft guideway to transmit both linear motion and torque while remaining torsionally stiff, such as one-armed swivel grippers or robots. Bushings can be installed without parallel second shaft normally required in standard applications to resist cocking loads. They are available in rotationally symmetrical sleeved or...

Read More »
Cutters and Inserts provide less than 0.0004 in. axial runout.
Other Milling Cutters

Cutters and Inserts provide less than 0.0004 in. axial runout.

Fix-Perfect finishing cutters and inserts are for cast iron milling. Radial negative, axial positive rake angle makes chipload of 0.020 in./tooth possible. Inserts have 4 cutting edges and are offered in 2 grades. K110M is uncoated K10 class grade designed for machining speeds of 500 to 1000 sfm. KC520M is K15 class TiAIN coated grade designed for machining speeds from 600 to 1250 sfm. Cutters...

Read More »
Gaskets

Gasketing Material cures in place.

Non-toxic, polyether-foam, gasketing material is formulated for automotive interior and exterior Buzz, Squeak & Rattle (BSR) applications. Isosyanate-free, 2-component, black, rubber foam adheres to hard-coated acrylic polycarbonate, and resists heat up to 120°C. Near frictionless cured bead surface allows mating parts to be slid into place with minimum adjustment force. Material cures in...

Read More »
Component Seal adapts to changing process conditions.
Hydraulic / Pneumatic / Radial Shaft Seals

Component Seal adapts to changing process conditions.

M7iM seal utilizes 1-piece Super-Sinus spring to provide uniform axial force. Designed for ANSI pumps, seal offers interchangeable parts, self-cleaning open drive collar, and cold-formed material structure. Sizes range from 1.000 to 4.000 in. Model M7iM operates in temperatures from -58 feg F to 430 deg F, and its operating pressure limit is 360 psi. It is capable of operation at shaft speeds up...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers