Mechanical Components and Assemblies

Rail Bearing Slide is available in 5 bore sizes.
Slides

Rail Bearing Slide is available in 5 bore sizes.

Series STP Rail Bearing Slide, originally offered with 8, 16, and 25 mm bore sizes, is also available in 12 and 20 mm bore sizes. All 5 sizes offer 3 travel lengths to fit various applications. Unit is designed with internal and external shock pads to eliminate metal to metal contact reducing noise and end-of-travel impact forces. Features include precise linear motion, twin cylinders, and...

Read More »
Cylinders

Rodless Pneumatic Cylinder works in temperatures to 500 ºF.

OSP Series Thermocylinder can be used for door opening and transfer in extreme temperature applications. It uses heat transfer and thermodynamic principles to allow coolant to pass through entire length of cylinder. As coolant passes through, heat energy is absorbed and barrel behaves similar to water jacket. This keeps heat away from cylinder bore where plastic and rubber parts are used.

Read More »
Watertight Hubs come in trade sizes from 1/2 to 4 in.
Hubs

Watertight Hubs come in trade sizes from 1/2 to 4 in.

Watertight hubs are designed to securely connect rigid conduit or IMC to threadless openings of electrical enclosures. UL Listed and CSA Certified, hubs feature corrosion-resistant metallic construction and die cast design. They have integral O-rings that provide watertight seals (NEMA 4X). Other features include fast wrenching profile and insulated throats rated up to 105°C.

Read More »
Spring Loaded Devices

Universal Spring Cylinders have large bearing surface.

DBM Universal Spring Cylinders include plunger with tapped hole and pilot bore on compression end and threaded extension on tension end. Standard or custom attachments may be added to fill needs in compression or tension. Hardened steel plunger (45-50 Rc) can be used directly without attachments. Cylinder bodies have accurate outside diameter, and are made with precision tolerances. Four cylinder...

Read More »
Emergency Ballast Pack converts fluorescent fixtures.
Ballasts

Emergency Ballast Pack converts fluorescent fixtures.

Compact 200 Series, Models 216, 217, 204SX, 211SX and 215SX allow fixture to provide lighting during normal or emergency conditions. During interruption of line voltage, each automatically switches to emergency mode and provides 90 min of lamp operation via rechargeable NiCad battery. When normal power is restored, integral battery charger returns battery to full charge. Ballasts meet NEC and...

Read More »
Machined Spring can be made of 7075-T6 aluminum and Delrin.
Springs

Machined Spring can be made of 7075-T6 aluminum and Delrin.

Compression/extension machined spring provides opportunities to incorporate attachments. Compression spring ends can be flat and square. Slot is of constant width from end to end to ensure no progressive touching of adjacent coils that would produce sound, debris or non-linearity. Materials used in machined springs manufacture include maraging materials such as 17-4PH CRES, 15-5PH CRES, Carpenter...

Read More »
Folded Covers protect equipment.
Covers

Folded Covers protect equipment.

Folded covers are available in wide range of materials to suit environment, from light duty dust to harsh abrasives. They have internal support system consisting of stiffeners or ribs made from rigid PVC and die cut to fit guide configurations of equipment to be protected. Folded bellows have maximum open-to-close ratio, useful in limited space. Mounting end plates can be engineered and...

Read More »
Flexible Discs grind and blend in one step.
Wheels

Flexible Discs grind and blend in one step.

Cotton fiber layers in Cut-N-Finish discs are impregnated with aluminum oxide grains and then pressed and bonded together, so discs constantly reveal fresh abrasives as they work. Suitable for edge grinding, surface blending, and working fillet welds on stainless steel and aluminum, discs are available in 4 1/2 and 7 in. sizes, and in A24, A36, A54, and A80 grit sizes in both flexible and medium...

Read More »
Narrow Pincer fits into confined areas.
Clamps

Narrow Pincer fits into confined areas.

For applying and removing stainless steel clamps, Narrow Jaw Pincer is only 3/8 in. wide, allowing it to fit into tight areas. It is made of forged steel with plastic-covered handles that make gripping easy. Smooth, rotating action of pincer's handles allows tool to operate easily. Applications include retrofit or repair operations, where equipment, appliances, and machinery is constructed with...

Read More »
Caster Wheels come with green rubber tires.
Rolling Wheels

Caster Wheels come with green rubber tires.

GR Series wheels have abrasion-resistant tires mounted on black nylon or aluminum center. Options include roller bearings or maintenance-free ball journal bearings that are lubricated for life. Wheels are available in 4, 5, 6-1/4, and 8 in. diameters with load capacities of 400, 440, 660, and 880 lb, respectively. Tread width is 1-1/4 inch for four and five-inch diameter wheels and 1-5/8 inch for...

Read More »

All Topics