Mechanical Components and Assemblies

Spring Loaded Devices

Universal Spring Cylinders have large bearing surface.

DBM Universal Spring Cylinders include plunger with tapped hole and pilot bore on compression end and threaded extension on tension end. Standard or custom attachments may be added to fill needs in compression or tension. Hardened steel plunger (45-50 Rc) can be used directly without attachments. Cylinder bodies have accurate outside diameter, and are made with precision tolerances. Four cylinder...

Read More »
Emergency Ballast Pack converts fluorescent fixtures.
Ballasts

Emergency Ballast Pack converts fluorescent fixtures.

Compact 200 Series, Models 216, 217, 204SX, 211SX and 215SX allow fixture to provide lighting during normal or emergency conditions. During interruption of line voltage, each automatically switches to emergency mode and provides 90 min of lamp operation via rechargeable NiCad battery. When normal power is restored, integral battery charger returns battery to full charge. Ballasts meet NEC and...

Read More »
Machined Spring can be made of 7075-T6 aluminum and Delrin.
Springs

Machined Spring can be made of 7075-T6 aluminum and Delrin.

Compression/extension machined spring provides opportunities to incorporate attachments. Compression spring ends can be flat and square. Slot is of constant width from end to end to ensure no progressive touching of adjacent coils that would produce sound, debris or non-linearity. Materials used in machined springs manufacture include maraging materials such as 17-4PH CRES, 15-5PH CRES, Carpenter...

Read More »
Folded Covers protect equipment.
Covers

Folded Covers protect equipment.

Folded covers are available in wide range of materials to suit environment, from light duty dust to harsh abrasives. They have internal support system consisting of stiffeners or ribs made from rigid PVC and die cut to fit guide configurations of equipment to be protected. Folded bellows have maximum open-to-close ratio, useful in limited space. Mounting end plates can be engineered and...

Read More »
Flexible Discs grind and blend in one step.
Wheels

Flexible Discs grind and blend in one step.

Cotton fiber layers in Cut-N-Finish discs are impregnated with aluminum oxide grains and then pressed and bonded together, so discs constantly reveal fresh abrasives as they work. Suitable for edge grinding, surface blending, and working fillet welds on stainless steel and aluminum, discs are available in 4 1/2 and 7 in. sizes, and in A24, A36, A54, and A80 grit sizes in both flexible and medium...

Read More »
Narrow Pincer fits into confined areas.
Clamps

Narrow Pincer fits into confined areas.

For applying and removing stainless steel clamps, Narrow Jaw Pincer is only 3/8 in. wide, allowing it to fit into tight areas. It is made of forged steel with plastic-covered handles that make gripping easy. Smooth, rotating action of pincer's handles allows tool to operate easily. Applications include retrofit or repair operations, where equipment, appliances, and machinery is constructed with...

Read More »
Caster Wheels come with green rubber tires.
Rolling Wheels

Caster Wheels come with green rubber tires.

GR Series wheels have abrasion-resistant tires mounted on black nylon or aluminum center. Options include roller bearings or maintenance-free ball journal bearings that are lubricated for life. Wheels are available in 4, 5, 6-1/4, and 8 in. diameters with load capacities of 400, 440, 660, and 880 lb, respectively. Tread width is 1-1/4 inch for four and five-inch diameter wheels and 1-5/8 inch for...

Read More »
Dock Seals and Shelters keep out inclement weather.
Miscellaneous Seals

Dock Seals and Shelters keep out inclement weather.

Available for door openings from 8 x 8 ft to 10 x 10 ft, model D-150-XX dock seals and model D-750-XX dock shelters mount around door opening in dock areas. Seal is available with projections from 10 to 20 in. with 36 oz reinforced black nylon facing. Shelter is available in projections of 18, 24, 30 and 36 in. with 54 oz reinforced black nylon facing. Shelter includes 36 in. drop curtain for...

Read More »
Metal Housing withstands stamping applications.
Housings

Metal Housing withstands stamping applications.

Compact Q8SE metal housing for Q-pak sensor works in stamping industry, die sensing, small assembly equipment and semi-conductor applications. Zinc housing measures 0.315 x 0.787 x 1.260 in., has dual mounting, visible LED at cable entry, and provides 0.118 in. sensing range on mild steel.

Read More »
One-Handed Clamp uses self-restraining technology..
Clamps

One-Handed Clamp uses self-restraining technology..

Adelok® helps assemble clamped components by holding itself closed and in place during installation. It is suitable for rapid clamp assembly and improved stacking methods for fluid lines and hoses, wire bundles, power cables and fire detection sense lines. Juggling of fasteners, standoffs, washers, ties and grommets is eliminated. Clamp can handle payloads of 0.062 to 3.50 in., and can be...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics