Mechanical Components and Assemblies

Cutting Inserts improve efficiency and productivity.
Inserts

Cutting Inserts improve efficiency and productivity.

Aluminum Cutting Inserts are available in WCGT 05 and WCGT 06 sizes to mount into existing OTM HOLESHOT(TM) and HOLESHOT(TM)-IS (Integral Shank) drills. Available in grade 12, inserts feature highly polished surfaces and up-sharp geometry for drilling aluminum. Their polished surfaces reduce coefficient of friction for drilling in soft, gummy material.

Read More »
Hydraulic Clamps hold thin-walled workpieces.
Power Clamps

Hydraulic Clamps hold thin-walled workpieces.

Built-in locking pistons in threaded-body push clamps, block cylinders, and edge clamps allow floating clamping of workpieces with minimum deformation. Pistons provide light clamping force, but high support force, ensuring parts do not move when being machined. Plungers in cylinders have thin-walled section that expands under high pressure against inside of housing to lock plunger in place....

Read More »
Bellows Covers resist chemicals and UV.
Bellows

Bellows Covers resist chemicals and UV.

Available in round and rectangular shapes in open-ended or closed form, LFP(TM) Bellows and Way Covers are made with flexible, multilayered PTFE material. Heat-sealed covers have no stitching, maintain zero-porosity even after severe flexing, resist chemical attack and ultraviolet exposure, and are rated for 500°F. Covers can incorporate numerous types of end attachments, and are available...

Read More »
Stainless Steel Clamp adjusts over wide range.
Hose Clamps

Stainless Steel Clamp adjusts over wide range.

Clamp provides large diametrical adjustment range, similar to worm gear clamps, but has higher strength of T-bolt clamp. This allows one product to be used in several different applications. It can be fastened using simple torque wrench. Clamp comes standard with 3/4 in. wide band and is available in both tempered and annealed stainless steel.

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Flange Gaskets seal under low pressures.
Gaskets

Flange Gaskets seal under low pressures.

TriGuard(TM) gaskets provide positive sealing in fluid piping on fragile flanges or flanges with irregularities, where bolt torque and gasket compression stress must be limited. Expanded PTFE material combines sealing characteristics of elastomers with temperature and chemical resistance of PTFE. Gas-tight sealing can be achieved at 250 psi. They are available in 1/2 to 28 in. ANSI ring and full...

Read More »
Linear-Rail Bellows are thermally sealed.
Bellows

Linear-Rail Bellows are thermally sealed.

Thermally Sealed Linear Rail Bellows offer liquid and dust proof materials and profiled PVC stiffeners in every fold. They install with snap on fit and Velcro fasteners. Thermally Sealed & Stitched Bellows offer seamless design for both liquid and particle protection. PVC frame is permanently attached into each fold. Stitched Style Bellow comes in round and rectangular form. Armadillo Bellows are...

Read More »
Miniature Ball Screw includes spring-preloaded double nut.
Power Screws

Miniature Ball Screw includes spring-preloaded double nut.

Series 1510 compensates for torque variations due to inaccuracies in ground thread. Diameters range from 3 to 16 mm with pitch down to 0.5 mm. Standard nut body is cylindrical with attaching thread. Applications include semiconductor production machines, inspection equipment, microscope stages, and miniature robotics. Series 1530 offers rolled thread for less demanding positioning applications....

Read More »
Test Assemblies range from DC to 65 GHz.
Electric Wire, Cable and Cable Assemblies

Test Assemblies range from DC to 65 GHz.

PHASEFLEX® Assemblies are crush-, torque-, kink-, and fluid-resistant. They are also dust- and dirt-proof with ergonomic/ruggedized boot strain reliefs. Standard connectors include SMA, TNC/PTNC, Type N/Precision N, 7 mm, 7-16, 3.5 mm, 2.92 mm (K style), 2.4 mm, 1.85 mm (V style). Assemblies are suitable for production testing, antenna range testing, thermal vacuum chambers, and remote...

Read More »
Cover Assembly eliminates leaks in pump controllers.
Miscellaneous Seals

Cover Assembly eliminates leaks in pump controllers.

Cover Assembly consists of integral control lever, actuating spring, and elastomer face seal. Its design materials handle effects of dampening fluid under pressure and withstand varying humidity and temperature changes. Assembly mounts face seal down to pressure control pilot valve with electrical connections made through round opening in cover wall. Assembly is suitable for use in off-highway...

Read More »
Channel Framing spans bar joists.
Channels

Channel Framing spans bar joists.

ERISTRUT half slot channel (12 gage 1 5/8 or 13/16 in.) comes in 6 ft 8 in. precut lengths with green powder coat, pre-galvanized, and yellow dichromate finishes. ERISTRUT channel framing is available in every strut style with finishes that include those listed above as well as hot dip galvanized, stainless steel, aluminum, and plain. CADDY(R) prefabricated strut/beam clamp model numbers 200RS...

Read More »

All Topics