Mechanical Components and Assemblies

Expansion Coupling simplifies installation.
Connector Fittings

Expansion Coupling simplifies installation.

UL-listed, CSA-approved Model XJG-TB Rigid Conduit Expansion Coupling speeds installation of expansion fittings in long runs of conduit. No disassembly is required during installation. Internal bonding jumper eliminates need for external jumper that can be tampered with and exposed to corrosion. Copper-braid jumper acts as fault current carrier and passes UL ground fault test. Sizes range from...

Read More »
Lead Screws handle demanding miniature applications.
Power Screws

Lead Screws handle demanding miniature applications.

Comprised of small diameter, precision-rolled, non-ball lead screw assemblies, Mini Series lasts hundreds of millions of inches of travel without requiring external lubrication, maintenance, or adjustment. Units are made of 303 stainless steel with TFE coating. Standard diameters are as small as .125 in. Designed to run smoothly on precision-rolled screws, maintenance-free nuts are made with...

Read More »
Photodiode Head fits into tight locations.
Rectifiers and Diodes

Photodiode Head fits into tight locations.

Model PD300-TP laser power measuring head is 4 mm thick and can make power measurements on cw lasers in tight spaces. Sliding filter measures 50 pW to 300 mW and also contains measurement in dBm. Spectral range is 350-1100 nm. Unit provides ±3% accuracy within spectral response range of 400-950 nm. Wavelength calibration is built-in. Model PD300-TP operates on stand or can be hand held.

Read More »
Low-Profile Clamps fit in tight spaces.
Hose Clamps

Low-Profile Clamps fit in tight spaces.

Stainless steel NORMACLAMP® Cobra hose clamps have one-piece design that can be closed around hose using manual or pneumatic pliers. Available in 7, 8, and 9 mm bandwidths with various diameters, units are color coded for identification. Maintenance-free, reusable products are suited for automotive air and fuel systems, washing machines, food processing, and irrigation systems.

Read More »
W-LAN Receiver System utilizes PocketPC® environment.
Receivers

W-LAN Receiver System utilizes PocketPC® environment.

Yellowjacket(TM) 802.11a Wi-Fi Analysis Tool works with Compaq's iPAQ PocketPC for sweeping, analyzing, and optimizing 5 GHz Wireless Local Area Networks. Calibrated receiver measures all 12 OFDM network channels operating on IEEE 802.11a standard, allowing users to determine Access Point, Packet Error Rate, SSID and RSSI signal levels of all access points, and NIC Client cards on or off network.

Read More »
Locator Bushings

Dowel Bushings suit large bolting applications.

Dowel Bushings align mating components and provide ID clearance hole for bolt, eliminating need for separate dowel hole. Spring Dowels align mating components when bolt must be located in separate location. Both products protect bolts from shear loading that will cause premature failure of bolt. Sizes are available for use with 5/8 in., 3/4 in., 14 mm, and 16 mm bolt sizes. They are made of...

Read More »
Quick-Disconnect Couplings suit high-flow chemical handling.
Couplings (Fittings)

Quick-Disconnect Couplings suit high-flow chemical handling.

Series NSH non-spill, corrosion-resistant, pressure-balanced couplings feature all-plastic, metal-free, and spring-free flow path. Integral termination fittings eliminate potential leak path. Couplings, with 3.0 Cv capacity, withstand operating pressures from vacuum to 120 psig and temperatures from 32-120°F. Terminations include 3/8 and 1/2 in. OD compression, 3/8 and 1/2 in. ID hose barb,...

Read More »
Couplings simplify cooling of electronic enclosures.
Couplings (Fittings)

Couplings simplify cooling of electronic enclosures.

Rack and Panel quick-disconnect, non-spill couplings make close-loop liquid cooling safe for electronic enclosures. Made of aluminum and thermoplastics, they are virtually leak-free with flow rates reaching 14 gpm at 100 psi. Couplings are suitable for cell tower base stations, power amplifiers, computer cooling, circuit board testing, and MRI cooling.

Read More »
Fork-Lift Cushions minimize product damage.
Bumpers

Fork-Lift Cushions minimize product damage.

Fork-Kushions(TM) equip lift trucks with Kastalon solid and Kast-A-Lite® polyurethane bumpers mounted to upright of fork, providing protection from marring, denting, and other forms of damage. Providing vibration-deadening properties without compromising load capacity, products adapt to all sizes of lift truck forks. Mounted directly to face of fork via permanent mounting bracket, bumpers do...

Read More »
Terminal Blocks accept three types of fuses.
Terminal Blocks

Terminal Blocks accept three types of fuses.

Three styles of ST 4 fuse terminal blocks include: compact 6.2 mm wide that accepts 5 x 20 mm fuses; 8.2 mm wide that accepts 6.3 x 32 mm fuses; and versatile 8.2 mm wide that accepts pluggable auto fuses or pluggable TCP thermal miniature circuit breaker. Blocks come with or without light indication that is displayed when fuse blows or circuit breaker is tripped. Fuse blocks have universal ST...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics