New Mechanical Components and Assemblies Products

Manual Dispensing System is offered with 75 ml capacity.

MIXPAC-® Hand-Held Cartridge Dispensing System consists of manual or pneumatic dispensing gun and static mixer that dispenses 2-component adhesives in 1:1 volumetric ratio. Molded of polypropylene, 75 ml cartridges utilize twist-and-lock static mixers and allow users of MIXPAC System 50 to dispense greater volumes without requiring new gun.

Oldham Couplings operate with zero backlash.

Featuring balanced design for reduced vibration, Paradrive oldham couplings are comprised of 2 hubs and acetal or nylon floating center disk. Torque transmission is accomplished by mating slots in center disk with drive tenons on hubs; slots fit with slight press. Disks are electrically isolating and can act as mechanical fuses. Couplings are offered in 7 sizes of set screw or Nomar clamp style...

Heat Shrink Tubing offers strain relief.

Extra Heavy-Duty Heat Shrink Tubing protects connections against moisture, contamination, abrasion, and corrosion. Providing 3:1 shrink ratio, thick adhesive inner wall melts to completely seal connection. Flame-retardant heavy wall meets MIL Spec 23053/15 Class I requirements.

Diaphragm Seal meets NACE MR0103-2003 standards.

With 2-piece construction, No. 70 Diaphragm Seal - NACE MR0175-2003 features 316 stainless steel housing and welded diaphragm. Connection for upper housing is -¼ and -½ in. NPT, while lower housing is -¼, -½, -¾, and 1 in. NPT, with flushing available. Uses include any oil and gas refinery applications requiring NACE-compliant MR0103-2003 diaphragm seal.

Finding the Right Bore Configuration for your Application

There are multiple things to consider when choosing a bore configuration for your application. Check out this e-book to learn more!

Pulsation Dampener suits high-pressure applications.

Designed for heavy-duty applications with pressures up to 4,000 psi, SENTRY XP is constructed to 4:1 max allowable working pressure safety margin. Shell construction is available in 8-24 in.-³ volumes, machined from solid rod of 316L or plated carbon steel. Unit features 2.75 in. thick plug top held in place by two 30,000 psi retaining rings. Bladders are available in Buna-N, EPDM, and Viton;...

Fixed Cord PDUs facilitate cable management and airflow.

HP Fixed Cord Extension Bars and Fixed Cord PDUs (power distribution units) aid in managing cable clutter in back of rack and improve airflow throughout the enclosure. Made for 1U fixed rail servers, output cords are fixed to PDU extension bar to reduce chances of accidental disconnection. Each output cord is 13 in. long, and there are 7 output cords per extension bar. Fixed cord PDU kits provide...

Insert Couplings replace standard bellow couplings.

Suited for CNC machines and digital drives, Series ADS-Servo Insert Couplings offer high torsional stiffness, yet still allow vibration dampening. They cover torque requirements between 89-5,895 lb-in. with bore sizes ranging from -¼-2-½ in. High-speed balancing for spindle applications is available on all coupling sizes.

Collet Closers hold parts up to 6 in. diameter.

Pull-back style collet closers, with A2-5 spindle nose, accept 16C collets up to 1 5/8 in., 16C step chucks up to 6 in. diameter, and expanding nose 16C collets for ID holding. Operating at maximum of 150 psi air or 400 psi hydraulic, drawtube force is 22.5 x line pressure, yielding theoretical clamping force of 5,062 lb on air and 13,750 lb on hydraulic at maximum drawtube force.

Quick-Release Pins feature stainless steel components.

Metric Quick Release Pins provide quick fixing, connecting, and locking of various jig and fixture systems. Shaft, ball, and spring components are stainless steel. Heat-resistant to 175-

Grinding Wheels offer custom-matched dressing tools.

Neptune X10 Grinding Wheels come in P-grade in sizes from 8-42 in. and grit sizes from 36-120. Soft, Medium, and Hard bond systems cover range of double disk grinding needs. X10-20, 30, and 35 tool styles contain 3 layers of multi set diamonds, and are suited for wheels up to 20, 30-36, and larger than 36 in., respectively. Single-layer, 7-diamond X10-7 is for 24-36 in. wheels. With diamond...

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.