Mechanical Components and Assemblies

Ball Bearing Sets accommodate thrust in either direction.

Ball Bearing Sets accommodate thrust in either direction.

MRC® Series 97000 angular contact, split inner ring ball bearings sets include 97000U2 Series with 29-º contact angle and 97000UP2 Series with 40-º contact angle. Configuration allows thrust capacity to be shared by 2 bearings in 1 direction and by 1 bearing in reverse direction. Available in metric bore sizes of 65-150 mm, units are engineered to ABEC-1 tolerances; feature land-guided,...

Read More »
Double-Cam Levers are offered in steel and stainless steel.

Double-Cam Levers are offered in steel and stainless steel.

Steel and Stainless Steel Double Cam Levers come with black-oxide finish and oil-resistant, red, plastic handle sleeves. Levers allow repositioning and clamping using a self-securing mechanism. When used with eccentric cam, clamping force remains constant in every position. Kingpin and snap ring are stainless steel on both versions.

Read More »
Disposable Cartridges suit pneumatic and manual dispensing.

Disposable Cartridges suit pneumatic and manual dispensing.

Disposable Plastic Cartridges are offered in 6 sizes from 1-32 oz, as well as 1/10th gal, with compatible plungers, seals, flange caps, and various nozzles in 2, 4, 6, 8, and 10 in. lengths. Available in low- or high-density polyethylene, cartridges have -¼ in. NPT female threads with internal valve seal and minimum burst strength of 100 psi. They are suited for adhesives, epoxies, lubricants,...

Read More »

Heat Shrink Tubing covers tapered and irregular objects.

Thickness of Texfluor PTFE 4:1 Heat Shrink Tubing facilitates installation over irregular shapes, fittings, and other protrusions. Product then conforms to object when heated to provide protective covering. Capable of operating continuously at up to 500-°F, tubing provides non-stick surface and resists chemicals, solvents, water, and acids. It is available in sizes from 0.078-2 in. in diameter....

Read More »

Finishing Chemicals are suited for nonwovens.

Synthebond line of polymers, resins, finishes, and fluorochemical extenders are engineered to deliver hand and color fastness, abrasion resistance, oil and water repellency, and increased strength and rigidity for nonwoven applications. Finishing chemicals feature range of binders, performance finishes, softeners, and soil release agents that optimize performance of products such as window...

Read More »
Container suits food/beverage/pharmaceutical industries.

Container suits food/beverage/pharmaceutical industries.

Returnable, polypropylene pallet T-PAK(TM) MAX3(TM) has design that maximizes transportation cube efficiency and interior volume capacity. FDA-approved, RFID-ready product has dimensions of 44 x 48 x 50 in. Pallet offers 4-way fork entry and is designed with non-sequential folding action that enables container to collapse to 11 in. high. Max dynamic capacity is 1,000 lb.

Read More »
Coupling Elements offer space saving design.

Coupling Elements offer space saving design.

Suited for limited installation conditions, 2-part elements can be integrated into fixture designs and used to transmit hydraulic oil or compressed air in machines with pallet transfer systems, from machine tool table to fixture. Offered with 3 nominal diameters for optimum adaptation to flow rate, flush-faced coupling mechanisms come in built-in and threaded-body styles that allow large axial...

Read More »
Tabletop Isolator uses active feedback control system.

Tabletop Isolator uses active feedback control system.

Available in 4 sizes, Series 8001 Active Electronic Vibration Isolation Platform isolates instruments from 6 translational and rotational modes of vibration. Portable unit features microprocessor control, has natural frequency of less than 1 Hz, and incorporates automatic leveling mechanism. Using active feedback, it damps vibrations from 1.0-1,000 Hz. For vibrations above 1000 Hz, unit provides...

Read More »
Pulsation Control suits high-pressure applications.

Pulsation Control suits high-pressure applications.

Through utilization of PTFE diaphragm, TEF-GUARD® Pulsation Dampener is rated with working pressure of 2,000 psi and meets needs of pulsation control where aggressive chemicals are pumped. Available in 316L stainless steel, Alloy 20, Hastelloy C, and carbon steel, unit is suited for any type of small, high-pressure reciprocating pump including metering and dosing pumps.

Read More »
O-Ring stays securely lodged under groove lip.

O-Ring stays securely lodged under groove lip.

Made of 90 Durometer Nitrile, Trap-Seal(TM) trapezoidal-shaped O-ring virtually eliminates possibility of O-ring popping out of face seal groove. Design provides consistently positive retention in groove and creates larger overlap between groove lip and trapezoidal seal, helping to eliminate leaks. Trap-Seal is interchangeable with O-ring used in standard SAE J1453 half-dovetail groove,...

Read More »

All Topics