Mechanical Components and Assemblies

Pulsation Dampeners can withstand up to 2,000 psi.

Designed for high pressure applications, Armor-Damp-® Pulsation Dampeners suit oil and gas, water and waste water, paint and coating, and chemical process applications. Available in capacities ranging from 30-1,000 cubic in., products are made of stainless steel, Alloy 20, and Hastelloy. Units come with pressure gauge and charging valve mounted on the top which allows these to be charged to...

Read More »
Shaft Collars lock in place when released.

Shaft Collars lock in place when released.

Suited for machinery or static applications, U-Clip shaft collars hold reels and tools in place on hardened or non-hardened shafts. Quick release, one-piece units are hand installed and have holding force of 55-80 lb depending on U-Clip size. They are available in 10, 12, 15, 16, 20, and 22 mm sizes, and feature spring loaded release plate that permits slide on/off action.

Read More »
Ocean Spray® Relies on Vibratory Shakers from Key Technology

Ocean Spray® Relies on Vibratory Shakers from Key Technology

March 21, 2007 - Producing the finest sweetened dried cranberries (SDC) is a science that Ocean Spray® has been working to perfect. From its fourth Craisins® line, which started up in May 2006 to its fifth line, scheduled to start up in the Spring of 2007 in Markham, WA, Ocean Spray relies on sanitary Smart Shaker® solutions from Key Technology. Key's versatile Iso-Flo® vibratory shakers...

Read More »

Pressure Compensating Labels incorporate PTFE membrane.

Self-adhesive and non-adhesive Pressure Compensation Seals (PCS) are available with air-permeable and waterproof PTFE membrane that enables air molecules to pass through seals while restricting passage of water, oil, and dirt particles. Made from microporous-membrane material that ensures pressure equalization, customizable PCS seals are suited for ventilation of equipment housings. They provide...

Read More »
Air Amplifiers and How They Work
Sponsored

Air Amplifiers and How They Work

Air amplifiers are pneumatically driven devices that use shop air to provide the motive power for increasing air pressure. This white paper provides an in-depth overview into the air amplifiers and how they work.

Read More »

Bolt Seal is designed for visibility and security.

Measuring 3 3/8 x -¾ in., High Security Snapper(TM) Bolt Seal is made of steel and has pull strength of 4,000 lb for C-TPAT and ISO 17712 compliance. This 2-piece seal enables both bolt and body to be consecutively numbered to provide optimal security and tamper resistance. Featuring bright yellow plastic coating, seal is suited for container door latches and trailer doors requiring extra...

Read More »

UARTs meet EIA/TIA-485 specifications.

Operating from single 3-5.5 V supply at data rates up to 8 Mbps, series XR19L402/400 single/dual-channel 8-bit UARTs with integrated RS-485 transceiver work in active, partial sleep, full sleep, and power-save modes. They feature 64-bytes of transmit and receive FIFOs, automatic RTS/CTS hardware flow control, automatic Xon/Xoff and special character software flow control, transmit and receive...

Read More »

Radial Bearings from Ondrives

Ondrives Ltd are pleased to offer a range of radial bearings from within the shafts and bearings section of their Ondrives mechanical drive components catalogue. They start with standard metric single row radial ball bearings in steel and are offered in three different types; open, with ZZ metal shields and 2RS two rubber sealed types. They start with a 3mm bore going up to50mm as standard and...

Read More »

CS Unitec's Automatic Feed Clamp System Simplifies Cutting of Pipe with Portable Pneumatic Hacksaw

A portable Pipe Clamp System with automatic feed is available from CS Unitec for use with the company's Portable Pneumatic Hacksaw. This System easily attaches to the Hacksaw and the pipe. It operates off of the same 90 psi air supply as the saw. This self-feeding device saves time and money by facilitating automatic cutting of pipe up to 30 in diameter. It eliminates manual cutting and makes the...

Read More »

Strain Relief from Igus Defends against Cable Damage and System Failure

EAST PROVIDENCE, R.I. - April 27, 2007 - Igus® Inc., the industry-leading developer of Energy Chain Systems®, Chainflex® continuous-flex cables and iglide® plastic bearings, offers various strain relief elements for its comprehensive line of Energy Chain® cable carriers. Designed to house, protect and extend the service life of cables and hoses on automated machinery, Energy Chain is a...

Read More »
Threaded Rubber Bumpers prevent surface damage.

Threaded Rubber Bumpers prevent surface damage.

Made of abrasion-resistant rubber, TB Series offers anti-skid and scratch-resistant properties to help cushion and provide vibration control. Units feature typical compression of 0.03 in. for 10 lb max load. Available in both metric and imperial threads, rigid brass stud facilitates installation and provides strong hold. Parts are corrosion-resistant and RoHS compliant.

Read More »

All Topics