Mechanical Components and Assemblies

Miscellaneous Bars

TAKK Offerings at CMM

Chicago, IL - June 4-7, 2007 TAKK Industries, an innovative manufacturer and distributor of static elimination equipment, will exhibit and discuss several of its newest hi-tech products at CMM 2007 tradeshow. Featured products will be IonStorm XR2, Ion-Edge Model 400T, Model 5851 Precision Point Static Eliminator, and Model 5850 Precision Point Ionizing Air Nozzle. TAKK IonStorm XR2, the most...

Read More »
Miscellaneous Seals

Seals meet ISO standards.

Designed for large O-Rings and other seal profiles over 20 in., FlexiMold(TM) giant seals eliminate risks associated with spliced O-Rings, and demonstrate full visual and dimensional integrity of molded seal. They can be produced in almost infinite diameters, and allow for zero defect quality policy.

Read More »
Heat Shrinkable Tubing features 8:1 shrink ratio.
Heat Shrink Tubing

Heat Shrinkable Tubing features 8:1 shrink ratio.

Suitable for applications where tubing must conform to oddly shaped substrates or fit over large objects, RAYCHEM URHT is flame-retardant, black, cross linked polyolefin tubing. It can also be used to insulate electronic components and other electrical assemblies/devices. Tubing operates over -55 to +135°C range and comes in 2 and 3 in. sizes that shrink, respectively, to 0.23 and 0.34 in....

Read More »
Electronic Boards

Interposer Card accelerates 2.5 in. SATA drive integration.

Offered as turnkey board solution, SS9135 provides OEMs with means to implement 2.5 in. SATA drives in enterprise-class storage arrays, including SAS and Fibre Channel-SATA (FC-SATA) infrastructures, for near-line and tiered-storage applications. Solution is based on SS1350 Active-Active Multiplexer, which enables single-ported SATA drives to connect like native dual-ported drives. Card also...

Read More »
Rotary Joints

DSTI Provides Large Rotary Union Assemblies for Energy Sector

MINNEAPOLIS, Minn. - July 12, 2007 - Dynamic Sealing continues to be a leading supplier of large custom rotary union assemblies to the energy sector. The design shown has (6) passages with 2" flow channels. It was designed to transfer hydraulic fluid at 5000 psi while rotating at up to 20 RPM. It is designed to operate outdoors in extreme environments, with temperatures ranging from -40 degrees F...

Read More »
Spring-Loaded Ball Transfers have self-adjusting design.
Ball Transfers

Spring-Loaded Ball Transfers have self-adjusting design.

SKF® Hevi-Load spring-loaded ball transfer units are engineered to reduce damage caused by shock loads, allow for dimension changes due to temperature, and self-adjust for even load distribution. Recirculating ball system offers capability to handle load capacities to 4,400 lb, with ball either up or down. It employs 12.7-50.8 mm dia load ball that rotates on bed of small balls supported on...

Read More »
Swing Cylinders suit workholding applications.
Power Clamps

Swing Cylinders suit workholding applications.

Available in top or bottom flange styles, hydraulically activated Swing Cylinders provide single or double-acting operation. Either style can be manifold-mounted, utilizing No. 2 SAE ports, or plumbed conventionally through two No. 4 SAE ports. Offered in 3 sizes with capacities from 1,000-5,000 lb, clamps have non-threaded bodies to facilitate mounting. Piston rotates 90° to right in...

Read More »
Deep Groove Ball Bearings offer minimized running noise.
Bearings

Deep Groove Ball Bearings offer minimized running noise.

Offered in 6000-6012, 6200-6212, and 6300-6310 sizes with bore diameters from 10-60 mm or 50 mm, single-row POP Series features double-lipped labyrinth seals, which protect against contamination. With temperature range of -50 to +150°C, lubricant ensures quiet operation and minimizes starting torque, even at low operating temperatures. Bearings come in open version, 2RS2 sealed version with...

Read More »
Electrical Wall Plate installs without screws.
Miscellaneous Plates

Electrical Wall Plate installs without screws.

Screwless Wall Plates feature 2-piece plastic subplate and screwless snap-installation to avoid having to remove the electrical device during installation. Plastic subplate includes an alignment guide to ensure a straight up and down installation, and the wall-hugging plate design is designed to eliminate dust buildup. Plates are available in 1, 2, 3, and 4-gang, and in white, ivory, light...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics