New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Mechanical Components and Assemblies

Federal-Mogul's Proprietary Liquid Elastomer Molding (LEM)(TM) Technology Offers Innovative Solution in Fuel Cell Development

Federal-Mogul's Proprietary Liquid Elastomer Molding (LEM)(TM) Technology Offers Innovative Solution in Fuel Cell Development

SOUTHFIELD, Mich., July 1 -- Federal-Mogul Corporation (NASDAQ:FDML), a leading global supplier of powertrain, chassis and safety technologies, has developed an innovative gasket technology to assist in fuel cell development for energy-efficient vehicles. Federal-Mogul's patented Liquid Elastomer Molding (LEM(TM)) gaskets are constructed with small engineered elastomeric beads molded onto thin...

Read More »
Miniature Couplings are available in 2 types.

Miniature Couplings are available in 2 types.

Suited for use with servomotors, XGT and XGS maximum speed couplings employ anti-vibration rubber to eliminate resonance points under 1,000 Hz. Disk couplings XBW (double disk) and XBS (single disk) allow for altering their length by as little as 1 mm increments by increasing or decreasing number of disks, for enhancing their performance attributes such as torsional stiffness or flexibility. They...

Read More »
Foam Inserts facilitate tool storage.

Foam Inserts facilitate tool storage.

Designed for Pelican(TM) Product's 0450 Mobile Tool Chest, Case Fit(TM) Drawer Liner Kits include 6 shallow drawer foam sets containing -¾ in. thick black foam with pressure sensitive adhesive and -¼ in. thick foam. Deep drawer set contains 2 pieces of 7/8 in. thick black foam with pressure sensitive adhesive and -¼ in. foam. Case Fit DL 45 is made of closed-cell, oil repellent, cross-linked...

Read More »

Device Technologies, Inc.'s Spring-Fast® Wire Protection System Will Equip Gulfstream Aerospace's New G650 Business Jet

Paris, France, June 16, 2009- Gulfstream Aerospace has selected Device Technologies, Inc.'s unique Spring-Fast-® grommet edging system for the new G650 business jet, providing protection against potentially dangerous wire and cable wear throughout the aircraft's operating lifetime. Initial shipments of the new SL Series grommet edging for the G650 are now underway, marking Device Technologies'...

Read More »
NSK Precision America Offers SPACEA(TM) Series for Special Environments

NSK Precision America Offers SPACEA(TM) Series for Special Environments

New series reduces downtime and increases overall cost savings for harsh conditions Franklin, Indiana, June 30, 2009- NSK's SPACEA(TM) series is a next generation range of bearings, ball screws and linear guides specifically designed for special operating environments used in clean room, vacuum, anti-corrosion, non-magnetic and high/low temperature applications. Developed with vacuum lubrication...

Read More »
Air Bearing Actuator Enables Extreme Low Force Sensitivity

Air Bearing Actuator Enables Extreme Low Force Sensitivity

Norwalk, CT. Super-sensitive grinding and polishing operations with forces controlled to as little as 0.001 pounds or 0.45 grams are now possible and being utilized in industry by customers of Airpot's Airpel -AB Air Bearing actuators. Many manufacturers with the need for extremely tight control of small incremental movements along with low forces and speeds are discovering the benefits of air...

Read More »
SKF® Solution for Upgrading Industrial Fans Combines Technologies for Increased Reliability

SKF® Solution for Upgrading Industrial Fans Combines Technologies for Increased Reliability

A new SKF® solution for upgrading industrial fans provides the capability to reduce bearing operating temperatures, increase fan reliability, and standardize an otherwise typically costly customized procedure. The upgrade combines optimized bearings, housings, and seals and an automatic circulating lubrication system to extend the service life of bearings and lubricant, reduce fan maintenance,...

Read More »
Pneumatic Conveyors Provide Controlled Feed Rates

Pneumatic Conveyors Provide Controlled Feed Rates

A full line of transfer tubes for building vacuum conveyor systems that are powered by compressed air to feed hoppers, evacuate dust, and remove trim waste is available from Anver Corporation of Hudson, Massachusetts. Anver TT Series Transfer Tubes are powered by compressed air and employ the Venturi principle to instantly create vacuum, controlled by regulating the input pressure, for conveying...

Read More »
Sandvik Coromant Introduces New High Performance Inserts for CoroThread 266

Sandvik Coromant Introduces New High Performance Inserts for CoroThread 266

Fair Lawn, New Jersey, June 16, 2009 - Sandvik Coromant has introduced a new insert size for the CoroThread 266, allowing the ultra-rigid tool to be used in the majority of general threading applications. The new size 16 inserts complement the existing sizes 22 and 27. The CoroThread 266 integrates Sandvik Coromant's unique iLock(TM) interface, which uses rails and grooves to create an incredibly...

Read More »

Elastomers exhibit explosive decompression resistance.

Developed for oil and gas applications, XploR(TM) range of explosive decompression resistant materials includes compounds in HNBR, FKM, and Isolast-® Perfluoroelastomer (FFKM), each of which demonstrates explosive decompression resistance. Materials in XploR(TM) range satisfy NORSOK M-710 sour service and Rapid Gas Decompression test conditions. They are available in standard international...

Read More »

All Topics