Mechanical Components and Assemblies

Cisco Saves $120,000/Year by Improving Exhaust Recirculation in Data Center

Cisco Saves $120,000/Year by Improving Exhaust Recirculation in Data Center

Cisco Systems achieved an estimated saving of $120,000 per year in energy costs by simulating a data center using Future Facilities' Virtual Facility (VF) simulation methodology. The simulation results were used to guide the placement of floor grilles and blanking panels that lowered information technology (IT) equipment inlet temperatures, making it possible to raise the chilled water setpoint...

Read More »
Aluminum Handwheels have flat faced design.

Aluminum Handwheels have flat faced design.

Available in metric and inch sizes, solid disk GN 923 and two-spoked GN 924 flat-faced handwheels are RoHS compliant and come in versions with recessed locking retractable handles and recessed safety retractable handles. Body of handwheel is pressure die-cast aluminum with powder coated matte black pebble finish or silver textured finish. Rim is concentric and square to bore. Removable plastic...

Read More »
Spring Plungers are available in M2 size.

Spring Plungers are available in M2 size.

Halder threaded line of spring plungers includes 11 sizes from M2 to M24, including M2 slotted spring plunger in threaded SS design with SS ball and spring. Suited for electronics and medical devices, line also includes M3 size press fit spring plunger available in SS, brass, and Delrin body types. Press fit plungers feature 7 sizes from M3 to M12.

Read More »
Injector/Ejector Handles and Panels target VPX systems.

Injector/Ejector Handles and Panels target VPX systems.

Designed to meet VITA 46/48 specifications, VPX Handles and Panel Solutions come in 1.0, 0.85, and 0.80 in. widths for various card sizes of architecture. Handles feature 2-step latching process and ergonomic design. Anodized panel front is scratch-resistant and non-conductive, while back and sides of panels are alodined, which is conductive but not scratch-resistant.

Read More »
Bird Technologies Group, TX RX Systems Brand Introduces the Multiband Shorthaul Control Station Combiners and Multiband Coupler

Bird Technologies Group, TX RX Systems Brand Introduces the Multiband Shorthaul Control Station Combiners and Multiband Coupler

The Multiband Control Station Combiner, model 43-05-01 Series, provides frequency-agile operation across multiple bands. Operating in frequency ranges of 40-960 MHz, the multi-channel multi-band combiner interoperability can be combined into a single network for efficiency. This is ideally used with the Multiband Coupler. The Multiband Coupler, model 80-05-14, reduces tower transmission lines at...

Read More »
Ratcheting Crank Handles are designed for machine control.

Ratcheting Crank Handles are designed for machine control.

Targeted for permanent mounting on shafts or studs in OEM or retrofit applications, ratcheting crank handles are available with either fixed or rotating metal handles or rotating plastic handles. Customizable units have arm lengths from 7-12 in and feature stamped steel handle plates, solid steel gears, and corrosion-resistant epoxy paint. Available openings include bore and keyway, square, or...

Read More »

Transfer and Distribution System has washdown-duty design.

Able to be used in packaging factories and processing section of plants, tna roflo-® 3 (cw) consists of modular conveyor pans that can be washed down on site or swapped out. Linear slip motion smoothly slides product in desired direction, virtually eliminating breakage. Constructed of stainless steel and rated to IP67, system offers complete wash-down functionality without requiring removal of...

Read More »
Pressure Compensation Seal ventilates solar junction boxes.

Pressure Compensation Seal ventilates solar junction boxes.

Suitable for use with solar power systems, IP67-rated Pressure Compensation Seal ventilates junction boxes of solar modules. Self-adhesive membrane withstands major temperature changes without damage. It is splash-proof and prevents moisture from entering housing, even after component has been submerged in water for 30 minutes.

Read More »
Hand Held Vacuum Cups feature audible alarm.

Hand Held Vacuum Cups feature audible alarm.

Available on most Powr-Grip-® N-Series vacuum cups as well as LJ6VH Vertical Handle, Low Vacuum Audio Alarm Plunger emits 70 dBa warning tone when vacuum levels begin to drop below acceptable levels. Powered by AAA battery, warning alarm is incorporated into metal-clad plunger assembly. Intelligent system automatically turns alarm on and off as necessary, so no user intervention is required.

Read More »

Hybrid Linear Bearing reduces friction in machine guard doors.

Combining rolling and sliding motions, DryLin-® WJRM bearing is designed to reduce driving force in applications involving adjustment of machine-guard doors, partitions, and adjustable locks or light handling tasks. Self-lubricating, plastic sliding sleeve bearing ensures dirt and moisture resistance, while maintenance-free polymer roller enhances usability in applications where doors up to 110...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics