Mechanical Components and Assemblies

Mechanical Components and Assemblies

Dial Face Options make gauges easier to read in low light.

Feb 24, 2015

Using reflective material affixed to gauge dial face, InSight™Â redirects available light to intensify brightness of dial display. InSight Glow™ reflective, photoluminescent material, charged by normal lighting or flashlight, illuminates entire front of instrument dial in darkness. Both products are available on industrial and process type gauges and bimetal thermometers for both dry... Read More

Computer Hardware & Peripherals, Electronic Components & Devices, Mechanical Components and Assemblies, Sensors Monitors & Transducers

CEVA at MWC 2015: Powering a New Era of Intelligent Mobile Devices with the Industry's Leading Portfolio of Communications, Multimedia and Connectivity IPs

Feb 24, 2015

CEVA at MWC 2015: Powering a New Era of Intelligent Mobile Devices with the Industry's Leading Portfolio of Communications, Multimedia and Connectivity IPs Showcasing the latest advances in computer vision, computational photography, audio, voice, sensing, cellular communications, Bluetooth Wi-Fi technologies; Visit CEVA at booth A50, hall 6 MOUNTAIN VIEW, Calif. – CEVA, Inc. (NASDAQ:... Read More

Mechanical Components and Assemblies

Machinists Inc. Creates Parts for World's Largest Underwater Observatory

Feb 24, 2015

At 10,000 feet down to the Pacific Ocean floor, off the Washington, Oregon coast, the pressures are incredible. It’s called the Regional Scales Nodes Project, a joint project of the University of Washington and the National Science Foundation. Machinist Inc. is building titanium components for the project, very high pressure cylinders, where the scientists will place their electronic monitoring... Read More

Machinery & Machining Tools, Mechanical Components and Assemblies

For Just About Any Application a Classic Coil is Always a Perfect Fit Brake and Clutch o Solenoid Mini-Sensors o Contactors Guidance Systems

Feb 23, 2015

Over a decade of experience in thermoplastic molding from bobbins to total encapsulation. Materials include nylon, polypropylene, polyester, PBT and custom formulated molding compounds. Industries served include: Aerospace, Military, Automotive, Nuclear, Marine and Communications. Paper Section Coils are a Specialty… Coils surpass the rigid standards of the nuclear and military industries in... Read More

Fasteners & Hardware, Mechanical Components and Assemblies

100 Year-Old Ballard Locks gets Upgrade to Keep Operating

Feb 23, 2015

For 100 years the Hiram M. Chittenden Lock's trunnions, gears and gates maintained the levels of Lake Washington's and Lake Union's waters. Obviously, these parts performed well for more than 100 years of nearly constant use, but as you might imagine, the Ballard Locks, as they're locally known, were due for an upgrade. For this project, Redside Construction partnered with... Read More

Mechanical Components and Assemblies

Toggle Switch Hexboot protects Against Elements.

Feb 20, 2015

Compatible with 15/32 inch threaded bushings, Toggle Switch Hexboot Accessory provides extra protection against elements in harsh environments. Unit consists of flexible, tear-resistant silicone rubber overmolded onto brass hexnut. Full hexboot completely covers toggle actuator and bushing. Designed to meet RoHS 2011/65/EU directive, boot also inhibits rotation of switches subjected to low... Read More

Green & Clean, Lubricants, Mechanical Components and Assemblies, Mechanical Power Transmission, Software

Dana Features Innovations Designed to Improve Fuel Efficiency, Optimize Performance at Technology & Maintenance Council's 2015 Annual Meeting

Feb 20, 2015

NASHVILLE, Tenn. – This week at the Technology Maintenance Council's 2015 Annual Meeting, Dana Holding Corporation (NYSE: DAN) will exhibit a range of products optimized for engine downspeeding, along with additional drivetrain technologies aimed at increasing efficiency and fuel economy.  With a focus on decreasing the total ownership costs of line-haul trucks and other heavy-duty,... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Mechanical Components and Assemblies

Xilinx and BEEcube Deliver World's First Millimeter Wave Prototyping Platform Solution for Pioneering Development of 5G Applications

Feb 20, 2015

Xilinx 256QAM millimeter wave modem IP integrated on the BEEcube BEE7 baseband platform provides complete "out of the box" solution for wideband backhaul prototyping SAN JOSE, Calif. – Xilinx, Inc. (NASDAQ: XLNX) and BEEcube today announced they have delivered the world's first millimeter wave (mmWave) prototyping platform solution for pioneering development of 5G applications.... Read More

Fluid & Gas Flow Equipment, Materials & Material Processing, Mechanical Components and Assemblies

Emco Plastics Awarded ITAR Certification

Feb 19, 2015

CEDAR GROVE, New Jersey — Emco Plastics, a leading plastic distributor of plastic sheet, rod, tube, and profiles, is proud to announce that they have received their International Traffic in Arms Regulations (ITAR) Registration. ITAR is a program directed by the US Department of State, regulating the export and import of U.S. military and defense related equipment and information. Companies... Read More

Material Handling & Storage, Mechanical Components and Assemblies

Replacement Drag Chains upgrade existing conveyors.

Feb 19, 2015

Available for all types of en-masse and chain drag type conveyors, Replacement Drag Chain Assemblies are built to specifications of existing conveyor and material conveyed. Drop-forged, case-hardened chain is made of CrMn alloy and provides high tensile strength, offering extended life in harsh 24/7 operating environments. Flight type is selected for optimum material movement and carrying... Read More

Mechanical Components and Assemblies, Portable Tools

Push/Pull Poles facilitate running of cables in tight spaces.

Feb 17, 2015

Made of non-conductive fiberglass to protect installer from electrical shock, Tuff-Rod™ push/pull poles simplify running of various types of cables above ceilings, down walls, under raised floors, or through hard to access voids and cavities. Products can be threaded together to achieve max length of 30 ft, and 3 attachment-ends – J Hook attachment, bullet tip, and Wisp head – extend... Read More

Materials & Material Processing, Mechanical Components and Assemblies, Safety & Security Equipment

Trim-Lok, Inc. Announces Flammability, Smoke and Toxicity (FST) Capabilities

Feb 12, 2015

Buena Park, CA — Trim-Lok Inc. announces the release of a Flammability, Smoke and Toxicity (FST) Certified Dense Rubber Material to expand their already extensive extrusion capabilities.  This addition helps Trim-Lok serve their customers that have Smoke and Flame requirements typically required in mass transit and aviation applications.  Trim-Lok's new FST Rated Materials are... Read More

Mechanical Components and Assemblies, Mechanical Power Transmission

Weldable Shaft Collars, Couplings promote design options.

Feb 09, 2015

Available in ANSI 1018 steel and weldable stainless steel, Stafford Weldable Shaft Collars and Couplings let users add such diverse mechanical and structural components as brackets, cams, lever arms, mounts, pins, and rods. Stafford Weldable Shaft Collars and Flange Mounts, available in 1- and 2-piece as well as hinged styles, come in ¼–6 in. bore sizes, while Weldable Shaft... Read More

Computer Hardware & Peripherals, Display & Presentation Equipment, Mechanical Components and Assemblies

Xilinx and Its Ecosystem Demonstrate All Programmable and Smarter Vision Solutions at ISE 2015

Feb 09, 2015

Demonstrations highlight design platforms, IP, and reference designs that provide the fastest way to bring 4K UHD and packet-based video systems to market SAN JOSE, Calif., – Xilinx, Inc. (NASDAQ: XLNX) and its ecosystem will demonstrate All Programmable and Smarter Vision Solutions at ISE 2015. Through a series of in-booth demonstrations, Xilinx and its Alliance Members will showcase design... Read More

Mechanical Components and Assemblies

Integral Piston Diaphragm suits hygienic applications.

Feb 04, 2015

Constructed of food-grade Wil-Flex™ Santoprene™, Wilden 3 in. Full-Stroke Integral Piston Diaphragm is suited for use in Wilden’s Saniflo™ FDA pumps, as well as Original™, Advanced™, and Advanced™ FIT series of air-operated double-diaphragm pumps. Integral piston is completely encapsulated within TPE material, so there is no outer piston that can trap fluid and particles. Operating... Read More

Green & Clean, HVAC, Mechanical Components and Assemblies

Motorized Axials offer capacities to 3,469 cfm.

Feb 03, 2015

Utilizing electronically commutated external rotor motor, DXG and DXP EC Motorized Axials are suited for many air-moving applications, including motor controls, electronics, power converter cabinets, and modular air conditioners. Precision balanced air-moving devices feature 1–10 Vdc or PWM motor control, input voltage of 208–277 V 50/60 Hz, and IP44 motor protection. Read More

Controls & Controllers, Mechanical Components and Assemblies, Textile Industry Products

Web Guide Controller features lighted, 4.3 in. touchscreen.

Jan 30, 2015

Along with operator panel that displays icons for controlling basic web guide functions, EVO 150 offers EtherNet/IP, PROFINET, and discrete I/O communication protocols that facilitate integration with existing PLC controls. This 24 Vdc controller features 150 W of power with ability to control brushed and brushless actuator motors. Web interface allows uploading/downloading of guide system... Read More

Material Handling & Storage, Mechanical Components and Assemblies, Portable Tools

Magnetic Spray Gun Holder helps organize paint booths.

Jan 29, 2015

Designed to keep spray guns orderly and close at hand, Spray Gun Holder features forked arm that is capable of holding spray guns in variety of orientations. Strong neodymium magnet allows holder to attach to any steel surface, even through multiple layers of paint buildup. Measuring 4.9 in. in diameter, holder projects out 5.5 in. and offers weight capacity up to 95 lb.  Read More

Architectural and Civil Engineering Products, Green & Clean, Materials & Material Processing, Mechanical Components and Assemblies

AXION Builds STRUXURE® Boardwalk in Canada

Jan 28, 2015

New Commercial Boardwalk System Used In Rehabilitation Project Built In Environmentally Sensitive Area in Canada ZANESVILLE, Ohio – AXION International Holdings, Inc. (AXIH), a leader in recycled plastic and polymer composite technologies used to produce ECOTRAX® rail ties/sleepers and STRUXURE® building products, announced today that its STRUXURE® Commercial Boardwalk products were... Read More

Mechanical Components and Assemblies, Transportation Industry Products

KONE Wins Elevator World 2015 "Project of the Year" Award for Airport Escalator Modernization

Jan 22, 2015

LISLE, Ill. – KONE, a global leader in the elevator and escalator industry, was recently recognized with top honors in Elevator World magazine's "Project of the Year" contest in the category of Escalator Modernization for its project located at the Seattle-Tacoma International Airport. The award-winning project, which was completed in 2013, included the installation of two new escalators... Read More