New Machinery & Machining Tools Products

Mortar Mill grinds up samples for analysis.

MS 100 Rapid Mortar Mill homogenizes sample volumes of 2 to 25 mL to particle size less than 20 microns, enabling samples to be pelletized for subsequent use in X-ray fluorescence or other spectral analyses. Grinding sets are available in 2 sizes and 5 different materials. Required fineness is typically achieved in 3 to 5 min. Unit has digital speed control settings for mortar and pestle, timer,...

Welding End Prep Tool removes tube stubs from header.

Mini MILLHOGÃ-® air-powered ID clamping end prep tool produces high torque at low rpm for milling hardened welds that have been exposed to high heat and pressure cycling. Its heavy-duty mandrel features clamp ribs that will not flex. Running at 34 rpm and generating 1,200 ft-lb of torque at cutter blade, Mini MILLHOG uses TiN-coated blades to produce a clean, continuous chip without cutting...

Plasma Cutting Package weighs only 35 lb, goes anywhere.

Lightweight and portable, Handy Plasma 550 has 35 A of cutting power at 40% duty cycle, making it able to cut 1/2 in. material. Output is adjustable so operator can tailor current for material to be cut. Power line conditioner lets unit operate off auxiliary power sources and handle poor power lines without damage, making it suitable for field use. It comes with company's PT-31 torch for drag or...

Laser Cutting System handles 5 x 10 ft sheets in 3 dimensions.

6-axis Domino 1530 machine tool provides 2 and 3-dimensional cuts with CO2 lasers rated 2,500 W to 4,000 W. It works in X and Y horizontal axes and Z vertical axis, and rotates horizontally and vertically. Its sixth F-axis allows programming of laser's focal length to automatically adapt to range of ferrous and non-ferrous materials of different thickness. Operator no longer needs to make manual...

Ergonomics Is Good Economics

While you don't need an MD to know that ergonomic designs are good for physical health, you probably didn't realize that these designs can actually be good for your economic health too.

Miter Saw Stand holds boards up to 16 ft long.

DW723 miter saw stand weighs 35 lbs, has folding legs that lock in place for stability, and supports loads up to 400 lbs. Adjustable extension arms slide out horizontally from both ends of unit, providing platform for cutting. Stand comes with two flip stop/supports that aid in consistent, accurate cutting. Length (folded) is 5-1/2 ft, width (folded) is 10 1/4 in., and height is 7-1/2 in....

Mold Dating Insert snaps in place.

Indexable mold dating insert allows molders to make fast changes to day, month, year or work shift without completely removing insert from mold. Date changes can be made with turn of screwdriver, while snap-in-place indexable adjustment ensures insert remains fixed in correct date position during production. Mold dating inserts are available in diameters of 6, 8, 10, 12, 16 and 20mm. Inserts are...

Conveyor Belts have insert rollers for better turns.

Insert rollers on Series 2400 radius belts enable low back pressure accumulation around turns with ratios of 2.8 and 1.7. Belts have gray acetal rollers located directly on belt rods. They protrude beyond top and bottom of belt, allowing manipulation of product speed to belt speed. Belts are available in white and gray polypropylene and white and blue acetal. They are built in widths from 6.0 in....

Debur Cell automates deburring and chamfering.

S 450/750 DBC Gear Debur Cell eliminates need to manually debur and chamfer gears through use of FANUC 6-axis servo-driven robot and programmable controller. Cell can be programmed to perform both top and bottom tooth and root gear deburring and chamfering geometry. Model S 450/750 DBC is available in two sizes: 2 in. through-hole with 18 in. dia, and 4 in. through-hole with 30 in. dia.

Development Kit complies with PICMG 2.16 specification.

PICMGÃ-® 2.16 Ethernet Packet Switching Development Kit consists of 9-slot tower with 8-slot PICMG 2.16 Ethernet Packet Switching backplane, which has mix of PICMG 2.16 node slots and standard CompactPCI slots. Kit includes provisions for CD ROM drive, hard drive and floppy drive; provisions for 80 mm rear plug-in modules and transition modules; embedded 300 W ATX power supply; and push/pull...

Cutting Machine features monolithic column design.

PHOENIX-® II 275 HC CNC Bevel Gear Cutting Machine is designed to machine gears with pitch diameters up to 275 mm. While it can accommodate wet cutting processes, it is well-suited for dry machining. Cutter spindle and work spindle are mounted directly to column, and cutter spindle pivots to create root angle, rather than mounting workspindle on rotating base. Machine includes direct-drive...

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.