New Electronic Components & Devices Products

Interface turns PC into laser power/energy meter.

Smart Head to USB Interface includes ActiveX software and supports laser power/energy heads. Once interface is connected and software is installed, PC or Laptop will log power or energy measurements up to 4,000 Hz, and provide statistics, histograms, and detailed graphical displays. Up to 10 heads can be displayed at once on one PC and no external power source is required. Each USB Interface box...

High Speed Interconnects minimize crosstalk.

High Speed Interconnect line includes variety of micro pitch (0.5, 0.635, and 0.8 mm) units with controlled impedance for enhanced signal integrity. Q-Strip(TM) interconnects are rated up to 2.33 GHz while Q-Pairs(TM) interconnects are rated up to 10 GHz. Designs include right-angle and edge-mount for perpendicular and horizontal board mating in single-ended and differential pairs configurations....

Ceramic Capacitors are offered in 100 and 250 V models.

Series CG Medium-High Voltage Multi-Layer Ceramic Capacitors include capacitance value/voltage range combinations of 0.1, 0.22, 0.47 and 1 Ã-µF at 100 V; and 0.01 and 0.1 Ã-µF at 250 V. Surface-mount units come in 0805, 1206, 1210, and 1812 case sizes. DC Bias characteristics minimize capacitance loss. Base metal (Nickel) internal and external electrodes extend component life....

Current Sensing Resistors offer heat/corrosion resistance.

Constructed of metal alloy, TLR series surface mount chip-type metal plate resistors are untrimmed, providing resistances from 1 milliohm to 4 Megaohms. Standard tolerances are rated at Ã-

Design Guide: Heat Sinks for High-Power Applications

Without appropriate thermal management, electronic components will degrade over time, causing problems ranging from minor errors to critical failures.

Mounting Clips install accelerometers.

Easy-Mount mounting clips may be attached to test structure using double-sided tape or adhesive. Once they are installed, accelerometers may be snapped into clips to make vibration measurements. Swivel-style clips rotate and pivot, permitting sensors installed on curved or sloped surfaces to be aligned along desired plane and axis.

Agitation Systems are custom designed.

Kettles and tanks can be custom produced with features found on company's standard equipment. Custom agitation systems can include inclined agitators, vacuum pressure designs with mechanical seals, heavy-duty designs to 2,000,000 CPS, and custom pharmaceutical grade finishes (including electropolish).

Rework System incorporates focused infrared technology.

Model IR-X400 Focused IR SMT/BGA Rework System combines Focused IR heating system with Dual Zone IR PCB pre-heater, with independent component and PCB closed loop temperature control. It is equipped with Advanced Digital Controller, which combined with ThermoActive V3 software, offers full computer control. Hands-free, semi-automatic system includes precision component pick-up, macro-micro Z-axis...

Crimp Connector complies with FCC Part 15.

Model RP-4252-B reverse polarity bulkhead crimp connector, with SMB jack body and SMB plug contact, is IEEE 802.11b Wi-Fi(TM) Compatible. Because it will not mate with standard SMB plugs, it complies with FCC Part 15. Designed for use up to 4 GHz, connector features nickel-plated brass body, gold plated contact, nickel plated hex nut and lock washer, and TeflonÃ-® insulation. Connector can be...

I/O Connector System is suited for server industry.

LaneLink(TM) connectors support InfiniBand(TM) 4X and 12X link technology. Cable-to-board I/O system is optimized for differential signaling at 2.5 Gbps per pair. Its pcb receptacle provides isolation of cable loads from SMT solder tails. Cable wire terminates directly to plug contacts, while wire guide and strain relief captures individual wires and attaches to ground contacts. Pinch-to-release...

Edge Connectors support PCI Express(TM) technology.

Edge card connector line includes series of four edge connectors, each with specific bandwidth capabilities. Connectors are suitable for use in computing and data communications applications including PCs, servers, and workstations.

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.