New Electronic Components & Devices Products

Line Driver delivers video signals over twisted pair cable.

Manufactured on XFCB bipolar process, AD8133 triple differential line driver is integrated into 4 x 4 mm package. With 225 MHz large signal bandwidth and 1,600 V/Ã-µs slew rate, it enables engineers needing to drive RGB signals over twisted-pair cable to eliminate use of multiple-chip solutions. Internal common-mode feedback provides output gain and phase balance of -60 dB @ 50 MHz,...

IR Emitters are optimized with 850 nm wavelength.

Lead-free infrared (IR) emitters TSHG6200 and TSMG3700, suited for CMOS camera and high-speed IR data transmission applications, incorporate GaAlAs double hetero technology and have 20 ns rise time and 1.8 V max forward voltage. Model TSHG6200 has radiant intensity of 180 mW/sr at forward current of 100 mA and Ã-

Device Programmer communicates via parallel or USB port.

Universal Device Programmer, Model 866 comes with 48-pin ZIF socket, which eliminates need of adapter for any DIP device up to 48 pins. Buffer features include erase, random data fill, fill block, copy block, move block, swap block, buffer print, find text, replace text, 8-bit and 16-bit view modes, go to address, and checksum calculator. Model 866 is suited for anyone utilizing portable computer...

LED Light Source cures adhesives in seconds.

Able to cure various UV- and visible light-cure adhesives in seconds, hand-held LoctiteÃ-® 7700(TM) offers typical output of 500 mW/cmÃ-² at wavelength of 405 nm. Portable curing system measures 9 x 1 x Ã-¾ in. and weighs less than 0.5 lb. Suited for applications in crowded or hard-to-reach areas, unit may be powered via rechargeable batteries or ac adapter. LED technology allows...

How to Select the Right Sprocket for Your Application

This ebook provides overview on how to select the right sprocket.

Strain Gage Signal Conditioners are rated NEMA 4X.

Series 8162 provides conditioned, amplified analog voltage and current output for strain gage based sensors such as load cells and reaction torque sensors. Operating from 12-28 Vdc power, signal conditioners deliver Ã-

Surface-Mount Capacitor suits 600-4,000 V applications.

Hi-QÃ-® Series MLC power capacitor handles high power and high voltage levels for RF applications. Capacitor features ultra-low ESR and dissipation factor at high frequencies as well as dielectric strength of 120% of rated WVdc. Capacitor is available in case sizes HQCC and HQCE, with capacitance values from 10-6,800 pF and tolerances to Ã-

Wedge-Based LEDs have 180-

Designed to replace T-1 Ã-¾ wedge-based incandescent bulbs, WB5 Series LEDs feature flat-faced lens design with internal reflector for light intensity. Subminiature products, rated 2.5-48 Vdc, measure 0.80 in. long and 0.230 in. in diameter. With service life rated at up to 100,000 hr, LEDs require typical operating current from 10-30 mA and come in 10 standard colors. Custom colors and...

Adapter Card enables communication with serial I/O.

Isolated adapter card, PCI-AC48, links RS-485 serial devices with industrial and personal computers using 33 MHz PCI bus. It enables RS-485 communication with Opto 22 serial-based I/O, including remote bricks for mistic(TM) I/O product family, as well as SNAP-B3000 serial brain. Product incorporates 2 RS-485 serial ports that provide communication in 2- or 4-wire mode, and software that allows...

I/O Module offers 24 million FPGA gates in one slot.

Software radio front-end incorporates two 105 MHz, 14-bit A/D converters and 2 user-configurable Virtex-II Pro FPGAs. VIM-2 module accepts up to 2 Model 6256s mounted on VIM baseboards while maintaining single-slot configuration, which offers 4 A/D channels and 24 million FPGA gates. Second-slot option increases number of A/D channels to 8 without requiring additional baseboard. Built-in memory...

RF Active Transmit Mixer is suited for 3G basestations.

Housed in 16-pin, 4 x 4 mm, surface-mount QFP package, LT5521 provides linearity and signal-to-noise performance that allows designers to build compact 3G cellular basestations. It incorporates differential input and output architecture, supporting linearity over operating frequency range of 10 MHz to 3.7 GHz. Able to be used in upconverting or downconverting application, product requires -5 dBm...

Does Your Parking Lot Make a Good First Impression?

To enhance its appearance by removing oil stains, Terminator-HSD uses micro bacteria to remove the stain without harsh chemicals, acids, or detergents. Check out the video to learn more.