Solderless Connectors provide snap-on interface.
Suited for LMR-240 low-loss coaxial cable, QMA EZ non-solder connectors provide snap-on version of SMA interface. They are available in straight and right angle versions, designated EZ-240-QMAM (3190-1533) and EZ-240-QM-RA (3190-1539), respectively. LMRÃ-® cables are flexible, non-kinking, low-loss RF transmission line cables that are suitable for use as antenna feeders, system jumpers, and...
Read More »Pot Core Inductors feature high inductance.
POWER POTS(TM) Series RL-7300 has 23 standard values for each of 5 different sizes. Units offer inductances from 10 mH to 1 H and handle currents from 12 mA to 1 A. Pot core design is capable of handling dc currents while maintaining stable inductance due to high saturation currents and self-shielding. Typical applications include dc chokes, differential mode chokes, filters, switching circuits,...
Read More »Slitting Lines are custom designed for coil processors.
Slitting Lines produce precision slit, tight, straight-walled slit coils at production rates up to 5 master coils per hour with as many as 20 different setups per shift. Systems handle 10,000-80,000 lb coils with speeds to 1,500 fpm, thicknesses from 0.005-0.375 in., and widths from 18-24 in. Features include dual indexing transfer slitter heads, keyless slitting arbors, power tooling lock-up,...
Read More »Connectors handle manufacturing environments.
Mechanically keyed Tuff-Link E-CON Connectors facilitate replacement of sensors, switches, and control components. Factory molded to cable, they feature nickel-plated brass couplers and IP 67 and NEMA 6 protection. Product line includes male and female plugs, straight and 90Ã-
Read More »The Use of Water Treatment in the Healthcare Industry
Facilities Where Water Treatment for Healthcare Is Essential
Read More »Surge Resistors manage overloads in motor control circuits.
Engineered for use in small motor control circuit designs in automotive and industrial applications, High Surge Film (HSF) Series handles pattern of overloads within circuit. Resistors feature dielectric coating and MetalGlaze(TM) thick film element fired at 1,000Ã-ºC to solid ceramic substrate. Fully rated to 1 W @ 70Ã-ºC, surface-mount products have cylindrical design, resistance range...
Read More »Amplifiers suit digital and analog broadcast applications.
LDMOS UHF Pallet Model LDU25 provides 25 W CW power for analog applications and 5 Wrms for digital video broadcast applications. Rated at 80 W CW, Model LDU60 offers 60 W peak sync in common amplification and 20 Wrms for DVB-T. Both feature Freescale RF power devices.
Read More »Connector System offers positive pin options.
Micro-rugged, Q2(TM) Series QMSS/QFSS has signal pins on .025 in. pitch and .433 in. mated height. System is available with up to 160 I/Os per connector set in single-ended configuration and up to 64 pairs in differential pair configuration. It is hot-pluggable with shields and ground plane mating first, followed by signal pins. System offers various options such as positive alignment features,...
Read More »Data Acquisition Board offers update rates to 100 kS/s.
Fully supported by LabVIEW, SoftWIRE, Agilent VEE, and MATLAB, PCI-DAS6031 board provides 64 single-ended or 32 differential channels of 16-bit analog input in addition to dual 16-bit analog outputs. Measurements on any of 14 input ranges may be taken at max sampling rate. Equipped with two 16-bit counter/timers, board has 8 digital, bi-directional I/O lines that can control relays and solenoids...
Read More »Power Resistors provide resistance from 1-10 mohm.
Made of metal alloy, Series TLR 3AW offers resistance to heat and corrosion and is suited for currents up to 2 A. Units offer power rating of 2 W with standard tolerances of Ã-
Read More »Linear Solenoid operates with max force of over 3.5 lb.
Measuring 20 x 10 x 12 mm, open-frame Series C5 is available in magnetic-latching configuration rated for forces up to 3 lb, as well as standard on/off version rated for forces in excess of 3.5 lb. Magnetic-latching version is suited for very low duty cycle applications where solenoid needs to remain in energized position for extended periods of time. Series is suitable for battery-powered...
Read More »Acoustic and Thermal Solutions for Original Equipment Manufacturers
Technicon's products solve the most complex noise pollution and thermal problems and improve product marketability. Check out the video to learn more.
Read More »