New Electronic Components & Devices Products

Busway Connector meets stringent safety requirements.

Busway Connector enables 8PT and 8PV switchboards to be connected with LD and LX busway systems to form integrated, low-voltage power distribution system. Unit is designed for current range of 1,600-6,300 A and is available in IP20-IP54 degrees of protection. Offering reliable power distribution with high short-circuit strength and minimal fire load, connector eliminates active hot spots due to...

Multi-Channel Steering Diode Array offers ESD protection.

Integrated passive DN3S06 is 4-channel steering diode array for applications requiring active conditioning of I/O signals. With capacitance values as low as 2 pF typ and Ã-

PC/104 Analog Cards are suited for various applications.

Available in 4 models for use in industry, transportation, COTS, and medical applications, cards embrace I/O options requiring analog I/O, digital I/O, and timing and pacing functionality. Conversion rates range from 100-500 K samples/sec with resolutions of 12- and 16-bits, and inputs can be configured for 16/32 single-ended or 8/16 differential lines. Features include programmable gain inputs,...

Supervisor Chips suit any application requiring monitoring.

Offered in 24 models, Supervisor Chips, rated at 5 and 3/3.3 V, include power-on reset/low-voltage detect which monitors system power and resets system processor when voltage is out of tolerance. Some models include battery switchover circuit, which can be used to battery back other components in system. Most include PFI/PFO circuit, which implements early power-fail warning function or monitors...

Site Amenities & Furnishings: Key Considerations When Sourcing A High-Volume Manufacturer

This white paper looks at the six key considerations when sourcing a high-volume manufacturer of site amenities and furnishings. Download now to find out more.

Dual Band TWT Microwave Amp simulates 600 V/m radar pulse.

Model 750TP1G3/200T provides RF power to simulate 600 V/m radar pulse requirement of GM 3097 and Ford ES-XW7T-1A278-AC automotive specifications. It can also provide 200 W CW power to satisfy requirements of both standards to achieve 70 V/m over 1-2 GHz frequency range. This 750/500 W pulse amplifier, suited for pulse applications at low to moderate duty factors, covers 1.15-1.45 and 2.7-3.1 GHz...

Portable Amplification System helps speakers in large rooms.

GoSpeak! voice amplification system uses dual flat-panel NXTÃ-® technology SurfaceSound(TM) speakers to provide room-filling audio amplification. It weighs less than 5 lb, measures 9 x 13 x 3 in., and provides 40 W of amplification. For crowds exceeding 200 people, multiple units can be daisy-chained. Microphone input, stereo line input and stereo line output are provided using 1/8 mini phone...

Heat Shrink Terminals feature watertight seals.

Heat shrink terminal line includes ring and spade terminals, butt connectors, and male and female disconnects. Terminals and connectors have dual-wall tubing with polymide inner layer that seals to terminal when heat is applied. Designed for applications that require watertight seal, they feature electrical current rating of 600 V and temperature rating of -10 to +150Ã-

Ethernet Device Servers are suited for industrial use.

Models SSE-400D and DSE-400D are equipped with one and two serial ports, respectively, that can be software-configured for RS-232/422/485 operation on all available ports. Both feature IP multicasting mode and PowerPC processor from Freescale. Housed in steel enclosures, products receive clean dc power through provided power supply, even when ac on factory floor is less than perfect.

ADC Family consumes power at rates down to 230 mW.

Available in 32-pin, 5 x 5 mm QFN package, LTC2220 ADC family include models that range from 10-170 Msps at 12- and 10-bit resolution, as well as 14-bit converters to 80 Msps. Optimized for undersampling, 3 V converters operate at high Intermediate Frequencies (IF); LTC2249 features 575 MHz bandwidth and achieves 85 dB SFDR up to 140 MHz input. Pin-compatible versions, at sample rates of 65, 40,...

Adapters/Receivers provide mobile connectivity.

CompactFlash Adapter provides Class II Bluetooth connectivity capable of communication within 32 ft radius. With attached external antenna, USB Class I Adapter enables communication within radius of 328 ft, while USB Class II Adapter, with integrated antenna, communicates within 32 ft radius. Available with Bluetooth, USB, or CompactFlash interfaces, GPS Receivers are designed to GPS-enable...

Trotec Laser Offers Customizable Industrial Laser Marking Solutions for Any Application

Trotec's laser marking solutions provide your company with configurable workstations and intuitive, customizable software. Check out our video to learn more.