Interconnect System operates at up to 15 GHz.
Supporting data rates to 10 Gbps, GORE(TM) Ultra High Density Interconnect System consists of cable-to-board and cable-to-cable interconnects for high-speed signals. PC board-mounted interposers/headers and low loss coaxial assemblies can be ganged together in multi-position housing with 0.120 in. signal-to-signal spacing. Typical insertion loss is 0.90 dB/ft or less through 6 GHz with low loss...
Read More »
LED Kits are sealed for extended use.
Stop/Tail/Turn and Clearance/Marker LED lights, available in red or amber, are 4 in. round sealed LED kits that include LED light, grommet, and pigtail. LEDs are set in impact-resistant plastic housing to increase life expectancy. Also available, sealed white LED back-up kits come with LED light, grommet, and pigtail.
Read More »
Analog-to-Digital Converter features 50 kHz bandwidth.
Model ADS1271 offers 1.8 Ã-µV/C offset drift with low in-band noise of 6.5 Ã-µV rms. Onboard linear phase decimation filter suppresses modular and signal out-of-band noise, providing signal pass-band of 90% of Nyquist rate with less than 0.005 db ripple. With 3 selectable operating modes, 24-bit unit offers 105 kSPS data rate, 109 dB SNR resolution, and power dissipation of 35 mW....
Read More »Intelligent Storage Processor uses ARC(TM) processor cores.
Based on 11 configurable ARC processors, FabricStream(TM) operates at 40 Gbps. It utilizes ARC-Based technology for data path and on-chip control functions as well as wire-speed packet-based processing performance. Targeted at embedded designs, it enables intelligent SAN services such as routing, volume management, data migration, and replication to be integrated into fabric switches, routers,...
Read More »Importance of Motor & Generator Maintenance & Repair in the Mining Industry
Electric motors and generators are essential components for mining industry equipment and the Battery Electric Vehicle (BEV) market. These sectors rely upon this equipment heavily to meet high production demands in rugged environments, and so they require careful design, construction, and maintenance to provide longevity and durability. Pumps, hoists, crushers, muckers, haulers, and mills are only some examples of mining and milling equipment utilizing electric motors.
Read More »Amplifier IC targets in-glass or small roof antennas.
One-chip, Model MT1120 integrates FM amplifier, AM amplifier, and automatic gain control functions for FM and AM bands. It amplifies signals with frequencies in 0.15-6.2 MHz range for AM and 76-162.4 MHz range for FM. Thresholds of AM and FM AGC function are variable and can be set according to application requirements. Temperature-compensated reference generator and high-output voltage op-amp...
Read More »
Screening Media prevents blinding in moist applications.
Abrasion- and tear-resistant Dur-X-Ultra Flex is made of proprietary rubber formula that delivers flexibility needed to prevent sticking problems and keep wet materials from blinding over screens. Used in medium- and light-duty applications, self-cleaning rubber screen does not require stopping of production to unplug screens. Available in modular or tensioned screens, it is offered with square...
Read More »
Lightning/Surge Protectors offer CAT 5 compatibility.
Configurable IX Protection Platform provides surge and lightning protection for data and Power Over Ethernet applications. Model IX-H suits applications up to 100 Mbps, such as Cat 5, UTP, and STP while Model IX-L supports applications up to 25 Mbps including T1/E1, RS422, and RS485. Model IX-M is targeted at RS232 platforms, and Model IX-DC24/48 fits 24 or 48 Vdc voltage power supplies. All are...
Read More »
Equalizer enables 4 Gbps speed on 1 Gbps backplanes.
Housed in 48-pin QFN lead-free package, SN65LVCP40, 0-4 Gbps data buffer/signal conditioner enables upgrade of 1 Gbps systems to 4 Gbps without redesigning backplane. It provides 0, 3, 6, or 9 dB selectable output pre-emphasis on drivers and features 5 dB receiver equalization for ISI jitter cleaning. Unit combines one pair of 1:2 buffers with single pair of 2:1 serial multiplexers and...
Read More »
Micro-Serrated Drive Pins enhance workholding capability.
Designed to facilitate hard turning, Neidlein hard-coated drive pins mount around face driver to reduce or eliminate part slippage and scrapped parts. If slippage occurs, pins can be used again. Given proper parameters, products achieve circular run outs of less than 0.002 mm in long production runs. They work with proprietary SB/FSB and FFB face drivers as well as special application face...
Read More »
Card Edge Connectors have straddle-mount design.
Used on test cards for validation of PCI Express(TM) platforms and add-in cards, connectors support implementation of serial PCI Express(TM) architecture in desktop PCs and servers. Products also facilitate connections between coplanar circuit boards. Series offers 1, 4, 8, or 16 serial PCI Express lanes, each comprised of differential transmit and receive signal pairs that support 2.5 Gbps data...
Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.
Read More »
