New Electronic Components & Devices Products

SMT Chip Resistor offers 300 mW rated power.

Measuring 0.126 x 0.062 x 0.025 in., VSMP1206 Bulk MetalÃ-® Z-foil resistor combines 0.01% load life stability and Ã-

Photodiode Energy Head measures energy down to picoJoules.

Model PD10-pJ offers energy scales from 100 nJ to 200 pJ, as well as pulse rates up to 4,000 Hz. It can make energy measurements as low as 10 pJ. Unit features spectral response of 0.19-1.1 Ã-µm, max pulse width of 50 Ã-µs, and max average power density of 5 WcmÃ-², with damage threshold of 0.1 J/cmÃ-². It is compatible with Nova, Nova II Handheld, LaserStar, Dual Channel...

Coaxial Connectors target GPS/802.11x Wi-Fi markets.

Suited for applications up to 6 GHz, in-line SSMCX Connectors feature minimal height of 2.50 mm and length of 7.85 mm. Shock resistant, cable-to-cable units deliver VSWR of 1.30 max at 1-3 GHz and 1.5 max at 3-6 GHz. Insertion loss is -0.26 dB. Compliant with RoHS requirements, snap-on connectors are suited for high-density mobile electronic equipment such as GSP/PDA, mobile wireless AP, PC...

RF Coaxial Connectors feature microminiature design.

Series DFC MMCX 25-00X, 25-10X, and 25-30X include 360Ã-

TOP 3 SEAL TROUBLE SIGNS and HOW TO FIX IT

If ignored, broken seals can lead to a loss in production and equipment shut down. For more information on seals and seal repairs, download now.

Connectors target datacom industry.

Amphe-PD(TM) Connectors include RADSOKÃ-® terminals, which feature stamped hyperbolic grid and support 50-70 A continuous duty. UL listed at 69 A and CSA listed at 55 A, units have single-position RADSOK with molded socket shell or dual-position TUV touch-proof unit with V0 rating. Amphe-PD Series can connect to wires, busbars, and circuit boards.

Backplane Connector offers design flexibility.

Offered with 3 and 2 mm column spacing in 150- and 120-position configurations, AirMax VSÃ-® 2-piece header-receptacle connector system allows for allocation of signals within connector. Insert molded leadframe assembly enables same connector to be used for differential pair signals, single ended signals, or power. Enabling systems to grow from 2.5-25 Gbps, part accommodates 63 differential...

LEDs indicate whether doors are locked or unlocked.

Available for indoor and outdoor use, Series 7201 features high intensity red and green LEDs on single panel designed to mount in standard electrical box enclosure. When used outdoors, weatherproof LEDs are mounted on gasketed plate for harsh exterior installations. Devices interface with almost any access control reader or proximity device. They are also available in multiple configurations with...

Tubular Solenoids offer integrated return spring.

Available with 12 or 24 Vdc input voltage, Push Type Series P-8 offers 10%, 25%, 50%, and continuous duty cycles. Plunger is pulled into solenoid coil when coil is energized. Shaft extension then pushes out through hole in end of mounting bushing. Integrated return spring is provided to send plunger/shaft assembly back to starting position. Suited for office automation and medical devices,...

In-System Programming Solution is designed for production.

Flexible, modular ImageWriter(TM) enables device programming on any board inside test fixture, helping electronics manufacturers manage production with multiple product configurations for single target board. It is based on open architecture that enables seamless integration with automated test and manufacturing systems and facilitates programming of devices already mounted on circuit board....

Card Edge Connectors facilitate PCI Express signaling.

Card Edge Connectors enable implementation of high-speed serial PCI Express signaling to riser cards in rack-mount servers. Series 10037901 is keyed to accept standard PCI Express x8 add-in card or 280-position riser card that can support PCI, PCI-X, or PCI Express add-in cards. Series 10027747 is keyed to accept 3-slot riser that provides two x8 PCI Express slots supporting x4 links and one...

560 and 572 Series IP67 Waterproof Inline Plug and Socket Connectors with Shock and Vibration Resistance

EDAC's new line of IP67 waterproof plug and socket connectors represent the cutting edge of waterproof connection technology. Part of the 560 and 572 series of connectors, they utilize innovative design concepts to deliver a level of performance and value that is unmatched in the industry. See our video to learn more.