Electronic Components & Devices

Power Resistors withstand harsh environmental conditions.

Power Resistors withstand harsh environmental conditions.

Wirewound Series W20 features lead-free, vitreous enamel coating, which seals resistor element in glasslike material, making it impervious to harsh environments. Rated for 3, 5, 7, 10, and 14 W with limiting voltages between 100-750 V, units offer resistance of 0.1 Ω to 100 kΩ with standard tolerances down to +1%. Operating from -55 to +200Â-

Read More »
Rack provides POE and network RPS compatibility.

Rack provides POE and network RPS compatibility.

With quick disconnect for 3 individual loads, 1,500 W, 1U Model PSM1554 accepts three PSM500 500 W power supplies. Unit is available with 48 V main and up to 30 A, and 12 V standby up to 4.5 A. Operating from input voltage of 90-264 Vac with active power factor correction, rack is hotplug and n+1 configurable for scalable and redundant applications. Each output is individually protected against...

Read More »
MLCCs feature tin-lead solder terminations.

MLCCs feature tin-lead solder terminations.

Manufactured to meet military and aerospace application requirements, LD Series multi-layer ceramic capacitors (MLCCs) offer tin-lead solder terminations with 5% lead minimum. Products are available in sizes from 0402-0612 with voltages ranging from 6.3-500 V. Applicable military products include missiles, guidance systems, and communication and radar equipment, while suitable space products...

Read More »
Miniature SMT PIN Photodiodes have 100 ns response time.

Miniature SMT PIN Photodiodes have 100 ns response time.

Manufactured in 4.24 x 5.0 x 1.12 mm package, lead-free TEMD5xxx Family promotes response time and sensitivity through optional daylight filtering and choice of 2 radiant-sensitive areas measuring 7.5 and 5.7 mmÂ-². Models TEMD5010 and TEMD5020 provide visible-light sensitivity from 400-1,100 nm. With integrated daylight filters and peak sensitivity of 850 nm, TEMD5110 and TEMD5120 are suited...

Read More »
Choosing the Right Material for Your Project
Sponsored

Choosing the Right Material for Your Project

When choosing an appropriate metal material, the range of options is so broad that selecting the correct material for your unique application can be challenging. Different metals have characteristics that can affect weldability, ductility, and formability. Our new eBook outlines the unique properties and applications of popular metals including: Stainless Steel Brass Aluminum Copper Titanium

Read More »
Motor Protection Filters limit peak voltage.

Motor Protection Filters limit peak voltage.

Placed at output of drive, KLC Series V1000 Filters protect both motor and cable runs. Units limit motor terminal voltage to 150% of bus voltage when applied to output of VFD and ahead of motor connected with up to 2,000 ft leads depending on carrier frequency and lead type. Filters minimize motor heating, noise, and vibration, as well as reduce common mode current by 30%, slowing down rate of...

Read More »

TTL/NECL Frequency Divider has programmable, 2-phase design.

Self-contained divider pod, PRL-260ANT, accepts input frequency f from dc to 1 GHz and outputs divided TTL and ECL clock signals with ratios from f/2-f/4096. Able to be cascaded with additional PRL frequency dividers, it accepts TTL and ECL clock signals as well as ac-coupled PECL, LVPECL, or sinewave signals. All divided outputs are synchronous with input frequency, and division ratios are...

Read More »

Test Socket suits devices from 28-40 mm-².

Measuring 3.507 x 2.750 x 1.759 in, RF Center Probe Test Socket offers manual testing of devices with pitches down to 0.50 mm, in applications with speeds from 1 GHz to over 18 GHz. Socket provides minimal signal loss via signal path of .077 in. Solderless, pressure-mount compression spring probes allow socket to be mounted to and removed from test board. Contact forces are 9-12 g per contact for...

Read More »

SCR Converters withstand severe conditions.

SixPac(TM) includes 3 dual isolated SCR modules that can be configured as 3-phase ac controller or regulated dc converter. Measuring 18 x 10 x 11 in., modules are mounted on heatsink and are equipped with input fuses, Hall effect current sensor, output bus, cooling fan, and capacitor filter bank. Units feature input voltages of 10-700 Vac and output currents from 50-1,000 Adc or 100-600 Aac rms...

Read More »

All Topics