New Electrical Equipment & Systems Products

Gearmotors have sealed design to keep oil clean.

Improved right angle single reduction gearmotors are available from 1/2 to 25 hp, in ac and dc. They have internal expansion bladder and Mobil synthetic SHC 634 oil bath lubrication. Because gearmotors are not vented, outside contamination from environment cannot enter and oil stays clean. Other improvements include induction hardened and ground worms for increased life, and castings that...

Ganged Outlet distributes computer system power.

Quadbloc+2 Type 4758 has 4 ganged IEC F outlets and frame, into which company's Type KEB1 switch/inlet, Type 6200 fused inlet, or Type 6220 double fused inlet can be snapped. Busbar of Quadbloc+2 is available with 6.3 mm quick-connect tabs, solder tabs, or combination thereof. Rear is housed in black plastic cover that protects from accidental contact. For mounting, entire unit snaps into panel...

Channel Framing spans bar joists.

ERISTRUT half slot channel (12 gage 1 5/8 or 13/16 in.) comes in 6 ft 8 in. precut lengths with green powder coat, pre-galvanized, and yellow dichromate finishes. ERISTRUT channel framing is available in every strut style with finishes that include those listed above as well as hot dip galvanized, stainless steel, aluminum, and plain. CADDY(R) prefabricated strut/beam clamp model numbers 200RS...

DC/DC Converters provide up to 40 W of power.

A-Series 2 x 2 in. DC/DC converters handle temperatures from -40 to 55Ã-

3 Formulation Methods to Reduce Lean Giveaway for Processed Meat

Download this white paper, and learn about three methods that can help you improve your bottom line and yield by reducing lean tissue giveaway.

Terminal Block offers hybrid design.

taris Hybrid Terminal Block has IDC terminations on one side and screw clamp termination on other side. It exceeds UL wire pull-out standards ensuring wire retention in industrial applications. By piercing wire insulation with single motion, technology enables instant contact between clamping body and solid or stranded wire. Terminal block is available in 1 and 2.5 mm single feedthrough and...

Safety Switches and Relays utilize solid state circuitry.

AMX series non-contact safety switches and safety relays offer internal monitoring system that detects safety contact failure and interlocks to fail-safe mode. Available in polycarbonate or stainless steel housings, they come with 3 m cable. Safety relays come with manual or automatic reset, are available in 22.5 or 100 mm models, have various safety contact configurations, and are available in...

DC/DC Converter Series has no minimum load requirement.

Surface-mount SXQ50 DC/DC converter series features outputs up to 50 W from quarter-brick, open-frame package which measures 2.3 x 1.46 x 0.4 in. Series employs fixed-frequency switching technology, and is available in four models with 5.0, 3.3, 2.5, or 1.8 V outputs (which can be trimmed from 90% to 110% of nominal). Units are rated to 20 A (1.8 and 2.5 V models), 15 A (3.3 V unit), and 10 A...

DC Power Supplies generate high power in DIN rail package.

PS Series supplies 2 to 20 amps at 24 Vdc and 4 amps at 12 Vdc. Input voltage is switch selectable to 115/230 Vac. DIN rail mounts and removable plug connections make installation easy. Units include constant-current, short-circuit protection, which limits output current as voltage is reduced, to safely protect control components from direct shorts and device failures. Power supplies meet UL/cL...

Rack holds up to 1,600 lbs per shelf.

Rivet-Grip(TM) freestanding heavy-duty rack is stocked 7 ft high, with depths from 12 to 48 in. and widths from 36 to 96 in. For long rows, it uses common uprights to reduce cost and enhance rigidity. Capacities range from 350 to 1,600 lb per shelf, which are available with particleboard or wire inserts.

Switching Power Supply provides up to 6000 W.

Bulk-front-end HPS15 can deliver 1500W of output power at 85% efficiency. Rack of 4 units can deliver 6,000 W of clean bulk dc power in 1,500 cu in. It has ac input range of 108 to 264 Vac and 0.98 power factor correction that meets EN61000-3-2 requirements for input current harmonic content. Each module has over-voltage and overload protection on all outputs, active inrush current limiting...

Acoustic and Thermal Solutions for Original Equipment Manufacturers

Technicon's products solve the most complex noise pollution and thermal problems and improve product marketability. Check out the video to learn more.