Electrical Equipment Brushes

Electrical Equipment Brushes

Seginus Inc. is Pleased to Introduce the 775688-2EH Carbon Brush

The 775688-2EH carbon brush is eligible for installation on the Embraer EMB-120 aircraft propeller de-ice system. The propeller de-ice system is used to removed ice buildup on the propeller blades during flight.Â- Brushes are eligible for installation on Hamilton Sundstrand De-Ice Brush Blocks: 775689-4 and 820507-1 Embraer Model Eligibility: EMB-120 For more specific model eligibility...

Read More »
Electrical Equipment Brushes

Seginus Inc. is Pleased to Introduce EHP069870-3 and EHP601952 Carbon Brushes

The EHP069870-3 EHP601952 carbon brushes are eligible for installation on DASSAULT AVIATION, Dornier, and EADS Casa Aircraft DC Starter-Generators. The Starter-Generator assembly houses eight (8) brushes and when in operation deliver current to the rotating armature's commutator when functioning in the starter mode and receive current when operating in the generator mode. Brushes are eligible...

Read More »
Electrical Equipment Brushes

Seginus Inc. is Pleased to Introduce EHRP607965, EHR23079-1281, EHR30300-1413, EHR23080-1903, EHR23088-1321, EHR30300-1414, EHR23080-1902, Carbon Brushes

These carbon brushes are eligible for installation on various aircraft DC Starter-Generators. The Starter-Generator assemblies, when in operation, deliver current to the rotating armature’s commutator when functioning in the starter mode and receive current when operating in the generator mode. Brushes are eligible for installation on Thales Avionics Electrical Systems and various Goodrich...

Read More »
Electrical Equipment Brushes

Seginus Inc. is Pleased to Introduce the EHRP602635 Carbon Brush

The EHRP602635 carbon brush is eligible for installation on DASSAULT AVIATION Aircraft DC Starter-Generators. The Starter-Generator assembly houses eight (8) brushes and when in operation deliver current to the rotating armature’s commutator when functioning in the starter mode and receive current when operating in the generator mode. Brushes are eligible for installation on AUXILEC DC...

Read More »
Electrical Equipment Brushes

Seginus Inc. is Pleased to Introduce the EHRP607965 Carbon Brush

The EHRP607965 Carbon Brush is eligible for installation on ATR aircraft DC Starter-Generators. The Starter-Generator Assembly houses eight (8) brushes. Brushes are eligible for installation on Thales Avionics Electrical Systems DC Starter-Generator, p/n 8260-121,-123 Model Eligibility: ATR42-200, ATR42-300, ATR42-320, ATR42-500, ATR72-101, ATR72-102, ATR72-201, ATR72-202, ATR72-212, ATR72-212A...

Read More »
Electrical Equipment Brushes

Seginus Inc. is Pleased to Introduce FAA PMA Approved Replacement Parts for Hamilton Sundstrand Propeller De-Ice Brush Block Assemblies

The Seginus Inc. Teflon pad EH789285-1 and carbon brush EH738466-6 are applicable for installation on Hamilton Sundstrand 782689-X de-ice brush blocks. The 782689-X brush block is installed on various aircraft. Model Eligibility: DHC-8-100, -200, -300 ATR 42, ATR 72 CL215T, CL415 XIAN Y7-200A For more specific model eligibility details, please see the supplements section of our website. For sales...

Read More »
Electrical Equipment Brushes

Carbon Brush Grade promotes turbine uptime.

Suitable for wind turbine applications,Â- LL587 improves uptime in demanding conditions through extended life and minimized wear. Construction properties result in optimal brush film and minimal friction while maintaining conductivity. Having demonstrated projected service life of 4+ years at test sites, product is suited for steel slip rings, where it reduces required maintenance...

Read More »
Carbon Brushes target wind turbine applications.
Electrical Equipment Brushes

Carbon Brushes target wind turbine applications.

Designed to handle environmental extremes experienced by wind turbines,Â- including scorching heat and corrosive sea salt, Carbon Brushes also withstand low-humidity environments, sudden changes in wind speed, and on/off cycling of generator. Units feature low friction due to optimized film formation, are tolerant to contamination, and provide maximum lifespan...

Read More »
Electrical Equipment Brushes

Repco Answers Industry Demand for Motor Control: Replacement Brushes, Starters, Shunts Options

REPCO is featuring three popular products for a wide range of industrial-duty motor and control applications: carbon brushes for GE Kinamatic DC motors, replacement contact kits for Allen Bradley Bulletin 500 starters and replacement shunts for Hubbell DC motor controls. Carbon Brushes for GE Kinamatic DC Motors GE Kinamatic DC motors are found in service in many different markets including...

Read More »
Repco Contacts, Brushes and Coils Get the Spotlight
Electrical Equipment Brushes

Repco Contacts, Brushes and Coils Get the Spotlight

Repco is featuring two replacement contacts for leading brands in its April 30 newsletter.Â-  Repco replacement contacts for Eaton A200, size 00-8 full-voltage AC starters have a strong installed base in the industrial market.  They are used in controls to turn-on and turn-off electric motors and motor-controlled equipment. Repco is also featuring Telemecanique/Gould replacement...

Read More »
Performance Packaging's AIRSHIELD™ Achieves FDA Approval for Food & Beverage Applications
Sponsored

Performance Packaging's AIRSHIELD™ Achieves FDA Approval for Food & Beverage Applications

As a globally recognized provider of full-service packaging products and services, we have a history of developing innovative solutions that promote enhanced efficiency in a wide range of packing applications. Our new AIRSHIELD™ product is just another example of how we are helping food and beverage manufacturers to extend the life of their products. To learn more about this cutting-edge product, see our video.

Read More »

All Topics