Electrical Fuses

0ADE Series Fuses are UL certified.
Electrical Equipment & Systems

0ADE Series Fuses are UL certified.

0ADE Series Fuses are available in 6x32 mm 0ADEC ceramic cartridge and 6x32 mm 0ADEP pigtail axial lead versions. Units are suitable for AC and DC high voltage, high current/high power supplies and bus grids applications. Products feature digi-key and mouser and come with cURus mark. Fuses are rated 500VAC with a 30kA interrupting rating and 500VDC with a 20kA interrupting rating.

Read More »
SHT Series Cartridge Fuse is cURus approved.
Electrical Equipment & Systems

SHT Series Cartridge Fuse is cURus approved.

SHT Series Cartridge Fuse offers breaking capacity up to 3500 A at nominal voltage of 250 VAC. Unit is rated up to 400 V for DC applications and is suitable for photovoltaic systems and frequency converters. Product is compatible with clips/blocks series CQP, OG-Clip, OGD and closed fuseholders series FEU FUS, FEC, FUL, FUA and FUP. SHT 6.3 x 32 offers axial leads for through-hole PCB mounting.

Read More »
514 Series Ceramic Body Fuses offer robust overcurrent protection.
Electrical Equipment & Systems

514 Series Ceramic Body Fuses offer robust overcurrent protection.

514 Series 500 VAC Ceramic Body Fuses are offered with current ratings ranging from 1.6 A to 12.5 A. Operated in -55°C to 125°C temperature range, units are suitable for applications such as UPSs, power inverters, smart meters and three-phase AC-DC power supplies. These fuses come in 6.3 mm x 32 mm footprint that is less susceptible to temperature cycling and vibration effects. Units are...

Read More »
PPTC Resettable Fuses provide trip resistance up to 1.6 Ohms.
Electrical Equipment & Systems

PPTC Resettable Fuses provide trip resistance up to 1.6 Ohms.

Available in 1206 and 1210 surface mount packages, Polymer Positive Temperature Coefficient Resettable Fuses are offered in MF-NSHT and MF-USHT series. Featuring operating temperatures up to 125 °C, units provide hold currents at elevated temperatures up to 0.50 Amps. Suitable for high density boards in industrial, telecom and consumer electronic applications, products offer resettable fault...

Read More »
How to Effectively and Efficiently Clean Heat Exchangers, Part I
Sponsored

How to Effectively and Efficiently Clean Heat Exchangers, Part I

For refineries and petrochemical plants, cleaning heat exchangers is a dirty job but somebody has to do it. While there are many approaches on how to clean shell and tube heat exchangers, it is indisputable that the right method is absolutely critical for ensuring that equipment is fully operational. Otherwise, you could end up with a potential equipment shutdown, which will cost you time and money. In this three-part series, you will learn about the various benefits, methods, and obstacles involved in heat exchanger cleaning. Part one introduces the fundamentals of cleaning, as well as explores the pros and cons of on-site versus off-site services. Download the first of this three series to assist you in finding the best solution for your dirty job here.

Read More »
HCF Solid State SMD Fuse offers vibration resistance of up to 1600 g.
Electrical Equipment & Systems

HCF Solid State SMD Fuse offers vibration resistance of up to 1600 g.

Suitable for on and offshore oil and gas applications, HCF Solid State SMD Fuse is designed with breaking capacity rated 1000 A at 125 VAC/ 125 VDC, over 5 A to 15 A current range. Operated in -50°C to 125°C temperature range, unit is compliant to cURus standards. Offering reliable performance in difficult conditions like thermal and mechanical shock and cycle endurance, product features...

Read More »
Resettable PPTC Devices feature overcurrent protection.
Electrical Equipment & Systems

Resettable PPTC Devices feature overcurrent protection.

Available in PolySwitch ASMDC, femtoASMD, and picoASMD Series models, Resettable PPTC Devices are suitable in automotive infotainment, communications, network, security, ADAS and climate control systems. Offering wide range of form factors, femtoASMD, and picoASMD Series come in smaller footprint. Protecting against overcurrents and short circuits, units does not require replacement after fault...

Read More »

Mersen Proudly Sponsors University of Washington for Ecocar3 Competition
Electrical Equipment & Systems

Mersen Proudly Sponsors University of Washington for Ecocar3 Competition

The EcoCAR 3 Advanced Vehicle Technology Competition challenges sixteen North American university teams to redesign a 2016 Chevrolet Camaro to reduce its environmental impact, while maintaining the muscle and performance expected from this iconic American car. Teams are tasked with enhancing the vehicle with cutting-edge energy efficient powertrains that retain high standards for safety and...

Read More »
Compact SMD Fuses are available with 20, 25, and 30 A ratings.
Electrical Equipment & Systems

Compact SMD Fuses are available with 20, 25, and 30 A ratings.

Offering 24 current ratings from 160 mA to 30 A at voltages up to 277 Vac and 250 Vdc, UMT-H series features 1,500 A breaking capacity and suits intrinsically safe applications. This time-lag fuse, with VDE and UL approvals and >10 mm spacing between end caps, meets IEC 60127-7/1, UL 248-14, and CSA C22.2 standards; provides overcurrent and short circuit protection in industrial control...

Read More »
Tekna Manufacturing LLC Announces Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industrys premier HBOT system. To learn more, see our video.

Read More »

All Topics