New Appleton PlexPower Motor Starters Eliminate the Need for Conduit Seals or Cable Glands
Motor Starters

New Appleton PlexPower Motor Starters Eliminate the Need for Conduit Seals or Cable Glands

The Appleton PlexPower™ Motor Starters are fabricated from 316L stainless steel and are suitable for use in hazardous, wet or corrosive environments like oil refineries and chemical plants. The units can be configured in single or multiple motor starter designs for reducing the space requirements in control rooms. The quarter-turn latches allow operator to easily open the unit. The PlexPower™...

Read More »
New Weego 66 Jump Starter is Offered with AutoBoost Functionality
Starters

New Weego 66 Jump Starter is Offered with AutoBoost Functionality

Weego 66 Jump Starter is designed for 12V gas and diesel engine systems and provides a jump start with 2500 peak amps and 600 cranking amps. Unit’s Smarty Clamps® consist of lights and sounds that guide user through jumping process. Weego 66 comes with built-in reverse-polarity, overheat and power surge protections. The jump starter can be operated in -4 to 140°F temperature range and...

Read More »
RSGD Series Soft Starter is equipped with integrated push button.
Motor Starters

RSGD Series Soft Starter is equipped with integrated push button.

RSGD Series Soft Starter is compatible with 3-phase induction AC motors. Unit offers operational current of 12 A up to 45 A, voltage from 220 VAC up to 600 VAC and horsepower rating up to 40 HP. Product comes with self-learning algorithm, two relay outputs and 24 VAC/VDC or 100-240VAC control voltage. Suitable for water treatment, agriculture, building automation and HVAC applications, soft...

Read More »
EX9S32 Manual Motor Starter features built-in fault indicator.
Motor Starters

EX9S32 Manual Motor Starter features built-in fault indicator.

Designed to perform functions such as manual motor control, branch-circuit short circuit protection, overload protection and switching (manual), EX9S32 Manual Motor Starter is available with up to 32A at 600 Vac rating. Offering power connection adapters, extended rotary lockable handle, undervoltage and shunt release contacts, unit meets UL 508 Type E standards.

Read More »
Effective Protection for Electric Motors and Loads
Motor Starters

Effective Protection for Electric Motors and Loads

 High-performance Simatic ET 200SP motor starter with new versions and functions  Now particularly powerful with four adjustment ranges up to 5.5 kilowatts  New fail-safe versions for a wide range of switching and monitoring tasks  New functions, such as motor blocking protection and Quick Stop, for greater throughput, productivity and availability The Simatic ET 200SP motor starter protects...

Read More »
Self-Learning Soft Starters suit motor applications up to 100 hp.
Motor Starters

Self-Learning Soft Starters suit motor applications up to 100 hp.

Supporting use with AC induction motors up to 100 A, 75 mm wide RSGD Series (220–600 Vac) employs self-learning algorithm that works with different applications without requiring adjustment of initial torque. These 3-phase soft starters, along with integrated electronic overload protection, PTC input, and diagnostic functions, provide Modbus 2-wire serial communication protocol for...

Read More »
Self-Protected Motor Controllers protect multi-motor applications.
Motor Starters

Self-Protected Motor Controllers protect multi-motor applications.

Series KTV7 combination motor controllers are intended for use with VFDs featuring output frequency of 400 Hz or less in multi-motor installations for such industries as food and beverage, material handling, and factory automation. With fixed magnetic trip and interruption ratings available up to 65KaIC at 400 and 480 V, these current limiting devices provide disconnect function for motor branch...

Read More »
Three-Phase Soft Starters suit water pumps up to 75 hp.
Motor Starters

Three-Phase Soft Starters suit water pumps up to 75 hp.

With RSWT Series, all 3 phases are controlled to achieve current balancing, minimizing inrush current as well as vibration during starting/stopping of centrifugal pumps. Through dedicated self-learning algorithm, series achieves smooth starting/stopping with minimal setting adjustments. V00/V01 type provides single adjustment setting for soft starting/stopping time, whereas V10/V11 type includes...

Read More »
Universal Process / Temperature Controllers

Rockwell Automation Brings SAB Maltings Into The Connected Enterprise

MILWAUKEEÂ- – Rockwell Automation recently supplied South African Breweries’ (SAB) first fully automated and networked EtherNet/IP-based control system for its new maltings plant in Alrode, South Africa. The new control system will integrate traditionally disparate, malt-production processes into a single, networked, EtherNet/IP-based solution to provide plantwide visibility and...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics