New Electrical Equipment & Systems Products

Wire-to-Wire Connectors suit underwater applications.

JWPF Series connectors are designed for moisture and submersion applications. Housing lances allow confirmation of contact lock-in for secure insertion. Plug-to-receptacle interlock housing prevents accidental disconnection. Connectors are offered with 2 to 4 circuits on 2.0 mm pitch, and contacts are rated at 3.0 Amps, 100 V ac/dc. Temperature range is -25 to +85Ã-

Test Assemblies range from DC to 65 GHz.

PHASEFLEXÃ-® Assemblies are crush-, torque-, kink-, and fluid-resistant. They are also dust- and dirt-proof with ergonomic/ruggedized boot strain reliefs. Standard connectors include SMA, TNC/PTNC, Type N/Precision N, 7 mm, 7-16, 3.5 mm, 2.92 mm (K style), 2.4 mm, 1.85 mm (V style). Assemblies are suitable for production testing, antenna range testing, thermal vacuum chambers, and remote...

Connectors eliminate need for rigid line.

EIA connectors, suitable for flexible braided cable, simplify routing. Available as straight and right angle plugs, receptacles, and adapters in 7/8 and 1 5/8 in. line sizes, they suit high power applications up to 10,000 W. Construction features silver-plated beryllium-copper inner conductors; TeflonÃ-® dielectrics; and brass and nickel or silver-plated bodies. They provide 50 ohm impedance...

Reed Switch suits compact environments.

Potted switch, with Celanex housing, measures 0.145 in. dia x 0.450 in. long. Single-pole, single-throw, normally open contact is rated for 10 W, 400 mA, and 170 Vdc. Magnetic field senses position of object and causes contact to open or close. Reed switch provides high speed switching with no mechanical wear, and requires no supply voltage for operation.

Checklist: How to Get the Right Belt the First Time

This guide is intended to help identify and address application criteria necessary to specify the right belt to deliver a highly efficient, reliable product.

IDE/Compact Flash Adapter allows through-panel mounting.

CFADPT-HD IDE to dual compact flash adapter allows connecting 2 compact flash cards to any system having IDE port. Designed for embedded systems, it has both 40 pin .1 in. and 44 pin 2 mm IDE connectors. Both hard disk style and floppy style power connectors are available for supplying power to CFADPT-HD when 40 pin IDE cables are used. Power is provided by IDE cable when 44 pin cable is used.

Cat 6 Cables meet all Draft 11 specifications.

Ultra 6(SM) category 6/class E cabling system meets specs for both channel and components out to 300 MHz. Component performance has been tested and verified by ITS ETL SEMKO to exceed all applicable component specifications of ANSI/TLA/EIA-568-B.2.1, Draft 11, Commercial Building Telecommunications Standard - Part 2: 100-ohm Balanced Twisted Pair Cabling Components.

Ethernet Switch works with embedded PC/104 systems.

Ethernet Switching Hub allows up to 5 devices using 10BaseT or 100baseTX Ethernet interfaces to communicate over network or Internet. It has five 10/100 auto-configurable transceivers, independent Fast Ethernet media access controllers, high-speed non-blocking switch fabric and address look-up engine, and 1 Mbit embedded frame buffer memory. Applications include machine monitoring, process...

Cover Assembly eliminates leaks in pump controllers.

Cover Assembly consists of integral control lever, actuating spring, and elastomer face seal. Its design materials handle effects of dampening fluid under pressure and withstand varying humidity and temperature changes. Assembly mounts face seal down to pressure control pilot valve with electrical connections made through round opening in cover wall. Assembly is suitable for use in off-highway...

Cooling Tower Motors handle hostile environments.

Epact and NEMA Premium(TM) cooling tower duty replacement motors operate in extreme humidity conditions and corrosive environments. Motors have double-sealed bearings, potted leads, bearing caps on 280 Frame and above, heavy gasketed conduit box and cover, sealed lead openings, sealed bracket-to-frame registers, and umbrella-type seal for shaft-up mounting. Motors are available in 2 to 100 hp....

Adapter encases pushbutton switch.

Extreme Duty Front Ring Adapter, installed in conjunction with mushroom cap, converts Series 14 pushbutton into larger, more rugged switch. Sealing o-ring protects switch element from outside weather conditions. Adapter is made of anodized aluminum and available in natural or black. It is suitable for use in emergency call boxes.

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.