New Electrical Equipment & Systems Products

Vacuum Motors suit processes sensitive to magnetic fields.

HR-V and HR-UV Series piezoelectric motors range in size from single element (providing .45 kg of force) to eight element (providing 3.6 kg of force). Suited for use in vacuum environments, HR motors are capable of driving linear and rotary stages. HR-V vacuum series motors are rated to 10E-7 Torr, and HR-UV motors are rated to 10E-10 Torr. Both configurations are suitable for bake out and...

Redundant Power Supply can be hot swapped.

In case of primary power supply failure, RPSS redundant power supply system for company's Series 90(TM) -30 controllers, switches power to backup unit without process interruption. If one power supply fails, user can replace failed unit by removing power from defective unit and hot swapping it while backup unit is powered and controlling process. Module is compatible with all Series 90-30 power...

Toggle Switches mount on printed circuit boards.

A Series subminiature washable toggle switches have sliding twin crossbar contact mechanism for switching reliability and smooth detent action. Conforming to standard PC board grids, terminals have 0.100 x 0.100 in. spacing. Toggles are available in single and double pole models in various styles, lengths, and colors, with matching indicators. Options include bats, anti-static levers, flatted...

Custom Cable Assemblies are built to customer specs.

Cable assemblies can combine multiple technologies, including plastics injection molding, over-molding, potting of devices, and wire sizes from 10 to 32 gauge. UL, CSA, and VDE approved, cable assemblies can range from single conductors up to 50 pairs, with mylar, foil, braid, copper shielding, and jacketing made from PVC, SJT, SJTO, SVT, and other materials. Active and passive components,...

Pressure Vessels & Their Components

This white paper provides an in-depth look into custom fabricated pressure vessels and their components.

DC/DC Converters deliver 60 Amps output current.

Open frame ALH60 and heat sink adaptable AEH60 are 60 Amp, half-brick converters with efficiencies up to 91% on 3.3 V model and 89% on 1.8 V model. Units include over temperature, over current and over voltage protection, plus under voltage lockout with hysteresis to prevent false starting and stopping at low input voltages. With 36 to 75 V input range and output voltages of 1.2, 1.8, 2.5, and...

DC to DC Converter measures 1.45 x 2.3 x 0.43 in.

DualQor(TM) series dual output voltage, quarter-brick sized isolated dc/dc converter delivers up to 60 W total output power at Ã-

High-Density Power Supply can be configured to specification.

Switch-mode, AC-DC Vega Series is offered in 450 and 650 W models with 10 outputs (max) each and no minimum load requirements. It provides seamless output voltage from 1.8 to 62 V, density of 5.8 W/inÃ-³, and allows input from 85 to 264 Vac. Modular series offers single PCB design, in both front-end converter and output module stages, and provides over-voltage and over-current protection.

Relay Modules are factory programmed.

ProgramaCube(TM) KRPS modules are available in any 1 of 11 single-timer functions (1 fixed or adjustable time delay). KRPD modules come in any 1 of 11 dual-timer functions (2 fixed or adjustable time delays). Both are offered with delays ranging from 0.1 sec to 1000 hrs in 9 ranges. Isolated SPDT output relay contacts are rated at 10 A. Microcontroller timing circuit provides Ã-

Power Jack comes with indicator light.

Through-hole, right angle dc jack has LED for applications where it is necessary to show that power is being supplied to device. Jack is UL94V-0 rated, made of black PBT thermoplastic, and rated to 2.5 A at 24 Vdc. Connector is 12.70 mm in height and available with 1.3 mm center pin. LED can be custom made to show either one or 2 colors. Applications include portable devices such as laptop...

Subminiature Relay features 0.2 in. wide, single inline package.

AZ920 Relay requires only 120 mW of coil power to switch up to 5 A at 250 Vac or 30 Vdc. It is offered in silver nickel or silver tin oxide with gold plated contacts and 2 terminal configurations. Relay comes with Class B insulation standard, or Class F insulation for high temperature applications. It is designed for industrial control use in products such as PLCs, instrumentation, timers, and...

ISO-Certified Plastic Injection Molding from Rodon

The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.