Surge Protector shields RS232 and industrial control lines.
Mounted to DIN 3 rail using DIN mounting clip located on rear of unit, Model HGLND-D2-12 protects differential data or balanced digital or analog lines from transients and surges. Three-stage lightning protector comprises differential gas discharge tube, pair of current limiting series resistors, and low capacitance diode array. By utilizing 3-stage system, Model HGLND-D2-12 is capable of...
Read More »
Lightning Arresters provide Level III and IV protection.
Featuring DIN rail-mount base, VAL-MS-T1/T2 Varistor-Based Arresters are rated for Type 1 lightning strike events with measured 10/350 -µs test current of 12.5 A or Type 2 surge events with measured 8/20 -µs max discharge surge current of 50 kA. All plugs have thermal disconnect device triggering visual and integrated remote monitoring contacts, allowing continuous monitoring of varistor’s...
Read More »
Ligntning and Surge Protectors are designed for AC/DC control lines.
Single stage AC/DC control line lightning and surge protectors products protect 8 individual single-ended AC or DC control lines using grounding lugs to provide tie points for earth ground. Weather-resistant models are available for 12, 24, and 48 Vac and 5 Vdc lines and feature removable screw terminal strips. AC protectors feature metal oxide varistors, while DC protectors feature uni-polar...
Read More »
The Alltec Protection Pyramid(TM): Lightning Protection, Surge Suppression and Grounding Systems
The Alltec Protection Pyramid(TM) provides a three-step comprehensive facility approach for lightning protection, surge suppression and grounding solutions. Our system begins with the installation of a code compliant, single-point, low resistance/impedance grounding system, sized to carry the full amplitude of a short circuit current safely to the ground. Next, surge protection devices are staged...
Read More »
The Ultimate Guide To Hydra Pneumatic and Servo Cylinders
This white paper provides a guide to hydra pneumatic and servo cylinders.
Read More »RGA Device Prevents Floating Roof Tank Fires
BOULDER, Colo., July 21 -- Lightning Eliminators and Consultants, Inc. (LEC, Inc. -- Boulder, CO, USA) announced the increased worldwide availability of its patented Retractable Grounding Assembly (RGA) for floating roof tanks. While shunt systems offer historically unreliable protection, the RGA solves the challenge of providing a consistent positive grounding connection between the tank roof...
Read More »
Lightning Protector suits Gigabit Ethernet systems.
Available in 12 configurations, Series ALPU protectors use fast-acting silicon avalanche suppression diodes and reduced capacitance protection circuitry that permits high signal bandwidth. Units deliver protection to IEC 61000-4-5 standards, and can protect up to 8 Cat-5e pairs as well as various configurations of dc power for POE applications. Measuring 5.5 x 4 x 3 in., metal or plastic...
Read More »
Lightning Protector delivers multi-strike safeguard.
Series AL-LSXM offers surge protection with multi-strike capability for broadband wireless, Wi-Fi, and WLAN communication systems. Available with N or TNC connectors, protectors feature weatherized housing and are dc blocked. Devices, designed for 2.0-6.0 GHz frequency range, feature insertion loss under 0.2 dB, return loss above 20 dB, and RF power of 10 W. Surge throughput energy is no more...
Read More »
Surge Protector detects and protects against lightning.
Defender-Series M-1000 proactively detects lightning up to 1 mile away and automatically takes action to protect itself and critical electrical and electronic systems. It uses various switching units that isolate computers, PLCs, telephone systems and lines, data lines, CCTV video feeds, and CCTV equipment as well as mission critical electronic equipment.
Read More »
Lightning Protector has multi-strike capability.
Providing protection from lightning and static discharge where dc voltage is required, GX Series Bias-T Protectors have weatherized housing and are available with N, 7/16 DINTNC, and SMA standard connectors. Series covers 400-1,200 MHz (CGX protector) and 800-2,500 MHz (DGX protector) frequency ranges and has surge capabilities of 8/20 -µs @ 20 kA and 10/350 -µs @ 10 kA. Return loss is above 26...
Read More »
Resettable Switch provides overcurrent protection.
Coated PolySwitch(R) TRW250-180 radial-leaded device protects ADSL modems, main distribution frame modules and central office, customer premise and access network equipment from lightning and power surges. It has rated hold current of 180 mA and helps design engineers meet ITU and Telcordia GR-974 requirements. Low-resistance, through-hole device limits fault energy, enabling OEMs to design...
Read More »
SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection
Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.
Read More »
