New MAC Motor from JVL Eliminates the Need for Separate Servo Driver or Controller
The MAC® Motor with 3000 W rating is combined with high-dynamic AC servo motor, hall-sensors, encoder, power supply, driver and positioning controller and Nano-PLC. The motor come in 311.8 mm length and deliver torque of 9.55/28.6 Nm at 3000 rpm. The motor is supplied with power via 3x400 VAC M23 connectors and is offered with Bluetooth, WLAN, ZigBee, EtherCAT, EtherNet/IP, CANopen and Profinet...
Read More »
Kollmorgen to Present Next Generation Robotic Motion Solutions for Robotic Applications at ROBO Business Expo 2018
RADFORD, VA – August 29, 2018 – Attendees of the 2018 ROBO Business Expo (September 25-27, in Santa Clara, CA) are invited to visit Booth #505, where Kollmorgen will feature its newest motion solutions for designers and manufacturers of commercial robotics and intelligent systems. Throughout the show, the company will offer exciting live demos and experts will be available to discuss...
Read More »
CUI Offers NEMA AMT112S Stepper Servo Motors Paired with Encoders for a Reliable Motion Control Feedback Solution
The NEMA AMT112S Stepper Servo Motors are offered in NEMA 8, 11, 14, 17, and 23 frame sizes with a step angle of 1.8°. The motors and encoders when paired with controller offer closed-loop feedback for a complete servo system. The AMT11 incremental encoders come with a digitally set zero position and 22 programmable resolutions ranging from 48 to 4096 PPR. The NEMA AMT112S motors deliver holding...
Read More »
New StepSERVO Integrated Motors Feature Encoder Feedback and Advanced Control Loops
StepSERVO™ Integrated Motors consist of TSM, SSM and TXM series models. Units support operations on step and direction, streaming commands, fieldbus communications and stored Q programming. TSM series and TXM series motors come with 8 digital inputs, 4 digital outputs and 1 analog input whereas the SSM series with 3 digital inputs, 1 digital output and 1 analog input. These servomotors...
Read More »
Workwear Goes Hand-In-Hand with Employee Satisfaction and Retention
High-quality gear reminds employees that they are valued by their employer and improves their workday. To find out more about choosing the best workwear, download now.
Read More »
Stepper and Servo Motors are suitable in automation applications.
Stepper and Servo Motors are designed in accordance with standards for electrical safety associated with UL and CSA certifications. Stepper motors are offered in single and double shaft versions with frame sizes ranging from 17 to 34 with torque values from 31 to 1,841 oz-in. Servo Motors come in 40 mm to 80 mm frame sizes and are equipped with 10,000 count incremental commutating encoder.
Read More »
EC 60 Brushless Servo Motors feature high pole pair count.
EC 60 Flat Frameless Brushless Servo Motors are offered in sizes ranging from size ranges from 70 W to 100 W with outer diameter of 60 mm. Units feature high accel/decel capabilities, low rotor inertia and low voltage windings. Motors are suitable for collaborative and mobile robots, AGV’s, exoskeletons and embedded robotic applications and come with hollow shaft construction.
Read More »
TSM11 StepSERVO Integrated Motors enable daisy-chain connections.
TSM11 StepSERVO Integrated Motors are enhanced with connector option that separates communication terminals as two standalone power and I/O connectors. Units are available with single 12-pin header, input, output, and RS-485 communication terminals. Connector option is offered in TSM11Q-1RM-H01, TSM11Q-2RM-H01, and TSM11Q-3RM-H01 motors. Motors can be equipped with PH Planetary Gearheads with...
Read More »
EC 45 Flat Frameless Servo Motor features hollow shaft construction.
EC 45 Flat Frameless Brushless Servo Motor is offered in 30 W to 70 W models. Featuring low voltage windings, high pole pair count and low rotor inertia, unit consists of rotor and stator with 43 mm of outer diameter. Motor is suitable for collaborative and mobile robots, AGV’s, exoskeletons and embedded robotic applications.
Read More »
Frameless Brushless Servo Motor Kits come with low voltage windings.
Frameless Brushless Servo Motor Kits consist of stator and rotor. Units are offered in size ranging from 30 Watt to 260 Watt and with outer diameter of 43 mm to 90 mm. These pancake products come with high pole pair count and offer high torque output. Kits feature hollow shaft construction which offers space for cable glands. Motor is suitable for collaborative and mobile robots, AGV’s,...
Read More »
Applied Motion Products Partners with HEIDENHAIN to Incorporate RENCO Encoder in StepSERVO™ Integrated Motors
SCHAUMBURG, IL (June 2017) – HEIDENHAIN CORPORATION is pleased to partner with Applied Motion Products, Inc. in the development of their StepSERVO™ integrated motors for high performance motion control applications. Utilizing’s HEIDENHAIN’s RENCO brand RCML 15 rotary encoder inside, StepSERVO™ offers the next evolution in step motor technology, combining the high torque capabilities of...
Read More »
Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard
Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.
Read More »
