Pull Chain Switches

Lifeline 5 Cable-Pull Switches feature LED indicators.
Pull Chain Switches

Lifeline 5 Cable-Pull Switches feature LED indicators.

Providing constant access to E-stop function, stopping machine hazard, Lifeline 5 Cable-Pull Switches feature LED indicators for assisting in cable tensioning, switch status and diagnostic during operation. Enclosed in IP66 and IP67 rated die-cast aluminum or rugged, stainless-steel housings, unit’s solid state operation offers electronic, rope-monitoring system for compensating thermal...

Read More »
Pull Chain Switches

Heavy-Duty Safety Rope Pull Switches initiate emergency command.

Designed to mount on machines and sections of conveyors which cannot be protected by guards, stainless steel OMEGA® GLHD Series can initiate emergency command from any point along installed rope length toÂ- protect conveyor lengths up 820 ft. These switches, which conform to ISO13850 and EN60947-5-5, provide emergency stop rope pull protection for exposed conveyors or machines. NEMA 6...

Read More »
Safety Rope Pull Switches protect conveyors up to 820 ft long.
Pull Chain Switches

Safety Rope Pull Switches protect conveyors up to 820 ft long.

Designed to mount on machines and sections of conveyors which cannot be protected by guards, OMEGA® GLHD Series can initiate emergency command from any point along installed rope length and provide robust emergency stop, rope pull protection for exposed conveyors or machines. Heavy-duty stainless steel switches conform to ISO13850 and EN60947-5-5 and can survive indoor or outdoor use...

Read More »
Emergency Pull-Wire Switches carry IP69K and IEC Ex ratings.
Pull Chain Switches

Emergency Pull-Wire Switches carry IP69K and IEC Ex ratings.

Suited for emergency-stop applications in corrosive environments, ZS71 and ZS91 Series are designed to withstand high-pressure/high-temperature washdowns (IP69K) and come in engineered plastic housing with stainless steel screws. IP67-rated ZS80 Series features integral E-Stop button, allowing optional E-Stop operation directly at switch. Each Series is also available for ATEX/IEC Ex-rated Zone 1...

Read More »
Switches for Extreme Environments x.
Pull Chain Switches

Switches for Extreme Environments x.

cCSAus certified switches designed for extreme or hazardous environments limit, safety interlock, emergency pull-wire switches, foot, magnetic position, magnetic safety, and belt alignment switches pushbutton control stations Depending upon model, can be built-to-order for environments classified as explosive (ATEX, IEC Ex, cCSAus), high temperature (to +180 °C), low temperature (to...

Read More »
Emergency Pull-Wire Switch suits heavy-duty applications.
Pull Chain Switches

Emergency Pull-Wire Switch suits heavy-duty applications.

Model EEx ZS 90 S emergency pull-wire switch features shock-proof duroplast enclosure, making it suited for use in rugged environments and heavy-duty applications. Unit includes 2 NC and 2 NO contacts, providing flexible actuation options. Pulling of wire, over distances of up to 100 m, connected to turning lever activates emergency stop function on conveyor belt. If wire breaks or is dismantled,...

Read More »
Emergency Stop Switches use rope pull for operation.
Pull Chain Switches

Emergency Stop Switches use rope pull for operation.

Covering spans from 40-200 m, ER Series is available with top-mounted metal E-stop button that provides emergency stopping at switch end of installation. Dual-indicator LED beacon may be wired to flash red or glow constant green. Featuring IP67-rated die-cast housing, switches withstand harsh environments. Snap-action operation protects against nuisance tripping due to vibration, and when pulled...

Read More »
Pull Chain Switches

Pull Switch provides emergency stop signaling.

Series 1CPS Safety Cable Pull Switch can operate at typical cable span of 250 ft in environment with temperature change of ±30°F when endspring is used. Internal mechanism latches on both slackened cable and pulled cable, eliminating unidentified nuisance stops caused by intermittent slack cable due to temperature variations or vibration. Device is CE marked, and UL and CSA tested....

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics