New UMR Series DC/DC Power Supplies are UL and CE Certified
UMR-A and UMR-AA series are biasing supplies with 12 or 24 volt input, outputs at 4, 20, or 30 watts from positive or negative 125 to 6,000 volts. UMR-C series are designed with exceptional capacitor charging capabilities, with limited overshoot and outstanding rise time. Come with current monitoring and output voltage control.
Read More »
New PH600A280 DC-DC Converter Comes with Remote On-Off, Over-Current and Over-Voltage Protection
Offers efficiency of 93% and can operate at full load with baseplate temperatures of -40°C to +85°C, derating linearly to 80% load at +100°C. Accepts 200 to 425Vdc input that delivers 24V at 12.5A and is certified to IEC/EN/UL/CSA 62368-1, EN 62477-1 (OVC III) with CE marking. Ideal for HVDC (High Voltage Direct Current) equipment for data communications, high voltage transmission, renewable...
Read More »
New PUB-2M Series DC/DC Converter is EN/UL 62368-1 Compliant
Delivers output power of up to 2W with no minimum load required and is available in single or dual output options. Offers output short-circuit protection and MTBF figures of 17.9Mhrs that achieves high efficiency up to 86.5% with 12V output under full load conditions. Operates in temperatures ranging from -40°C to +110°C and is ideal for harsh environments in industrial applications.
Read More »
New RCM60 DC-DC Converters are Protected Against Short Circuit with Automatic Recovery
Offer board battery voltages from 24 V to 110 V and isolated single output voltage of 12 V, 15 V or 24 V. Features integrated hold-up capacitors for 20 ms interruption, ORing FET and passive current share for parallel and redundant operation. Can operate fully loaded in cooled environment at temperatures from -40°C up to 70°C.
Read More »
Tips for Managing Dangerous Dust in Manufacturing Facilities
This eBook covers important considerations when creating a dust management plan for your facility. For more information, download now.
Read More »
New DC-DC Converter Features 500 mA Output Current
VXO78-500-M features no-load input current as low as 0.2mA and a wide -40 to +85°C temperature range. Offers a wide 4.75 to 36 VDC input voltage range, short-circuit protection and 4-SMD reflow solderability in an ultra-compact SMT package with half-vias corners. Ideal for ITE, controls and electronics that require a wide input at a low cost.
Read More »
New PUC-2B Series Miniature DC-DC Converters are EN/UL 62368-1 Compliant
Available in single or dual output options and deliver output power of up to 2W, with no minimum load required. Offer operating temperatures ranging from -40°C to +95°C and are ideal for harsh environments in industrial applications. Housed in SIP7 package measuring 19.7 x 7.1 x 11.5 mm. and have mean time between failures (MTBF) rated at 12.9 million hours (Mhrs).
Read More »
New DC-DC Converters Meet IEC/EN/UL 62368-1 Standards
Uses step-down non-isolated power modules that operate from input range of 9 up to 53Vdc, with a wide adjustable output voltage range of 3.3 up to 24V. Ideal for generating additional low cost, high current outputs from an existing 24V bus in industrial, semi fabrication and test and measurement equipment. Offers single nominal output +12V 20A, dual output +12V 20A / +5V 20A and dual output +12V...
Read More »
New SWIF DC/DC Buck Converter Provides Improved Efficiency at High Switching Frequencies
Deliver up to 160 A of output current at an 85°C ambient temperature and bolsters thermal performance for communications, enterprise and industrial applications. Comes with PMBus interface that offers selectable internal compensation network and achieves low thermal resistance of 8.1°C per watt. Offers switching frequency of 1.5 MHz that enables engineers to deliver 40 A of current per IC while...
Read More »
New NGP800 Power Supplies Offer Overcurrent, Overvoltage and Overpower Protection
Comes with 5 in. high resolution touch screen that displays detailed statistics. Offers maximum flexibility for voltages up to 250 V, currents up to 80 A and power up to 800 W. Ideal for test and measurement application requiring up to four independent DC power supplies.
Read More »
New Miniature DC-DC Converters for Industrial Applications
Provides output power of up to 1W with no minimum load required. Deliver the reliability and ruggedness needed for the harsh environments found in industrial applications. Available with wide operating temperature range of -40°C to 100°C and -40°C to 110°C.
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
