Flexible ATA Cable is UL and CSA approved.
Serial ATA cable is built for Serial ATA drives, and can replace cables used with Ultra ATA 66 and 100 disk drive systems. Available in 26 AWG and 30 AWG, cable meets or exceeds all Serial ATA specifications. Web tear feature aids in cable stripping and termination.
Read More »Power Supplies offer configuration flexibility.
Helios MiniFLEX line accepts modular rectifiers rated at 250 and 500 watts, enabling units to provide maximum output power ranging from 1,000 to 2,000 watts. MiniFLEX devices can hold up to 4 hot swappable rectifiers or operate with single rectifier installed. They have front accessible connections, built in Low Voltage Disconnect and eight 10 amp fused distribution outputs. Units are 3U tall, 19...
Read More »IEC Terminal Blocks allow for direct mounting.
IEC Terminal Blocks consist of Feed Through Blocks, Spring Clamp Blocks, Insulation Displacement Blocks, Double and Triple Level Blocks, Tab Connection Blocks, and IDC to Screw Clamp Blocks. In addition to meeting IEC specifications and standards, terminal blocks meet UL and CSA approval. Housings are molded out of 6.6 polyamide, and metal bodies are made of nickel-plated, copper alloy. They are...
Read More »Rotary Switches can be washed and mounted on PCB.
MR Series miniature low-profile rotaries are available with single, double and 4 poles. All models have adjustable stopper settings, break-before-make contacts, molded-in and epoxy sealed terminals, and interior housing seal for washability. Positive detent mechanism provides crisp feel and audible feedback. Shaft-actuated models have rubber washer and double-flatted bushing to create front panel...
Read More »A Comprehensive Guide to E-Mobility and E-Aviation
This white paper provides a comprehensive guide to E-Mobility and E-Aviation.
Read More »Pushbutton Switches are sealed for harsh environments.
Miniature, panel-sealed Series 57 devices carry IP67 immersion rating, are made of velour chrome-plated zinc alloy, and have gold-plated palladium-nickel contacts and gold-plated brass terminals. Momentary-action switches are rated from 400 mA at 32 Vac to 125 mA at 125 Vac. They are available with round buttons and bezels, LED status illumination, and in red and green LED colors. Switches are...
Read More »Plug and Outlet perform in harsh environments.
IMAX(TM) plug and outlet withstand vibration, moisture, temperature extremes, and electromagnetic interference. Components provide category 5e Ethernet solution for factory floor and various facilities. With 1/4 turn of bayonet-style coupling nut, plug and outlet become fully engaged and sealed against liquids and other environmental contaminants. They have IP67 rating, and are available in UTP...
Read More »Inverter powers arc-welding systems.
Power-Master(R) 500P, with 560 A dc output, is suitable for most welding applications. 24 factory-preset pulse programs facilitate matching size and type of wire to pulse welding applications. Programs are available for mild steel, stainless steel, aluminum, nickel alloys, and silicon bronze. Inverter switches between weld processes, such as gas tungsten, shielded metal, gas metal, and pulsed gas...
Read More »Terminal Blocks fit into small spaces.
880 Series are 5 mm wide, and are suitable for front entry wiring when DIN rail space is limited. 4-conductor blocks, part numbers 880-831-834 and -832, are available without shield contact; are UL-rated at 600V, 20A; and have separate test openings for test plugs. Also available are 2 and 3-conductor through terminal blocks, with or without shield contact. Additional features include separate...
Read More »Workstations incorporate HEPA filters.
Laminar Flow (Unidirectional) Workstations are available in horizontal, vertical, crossflow, and peripheral flow configurations. Their HEPA (High Efficiency Particulate Air) filters are rated 99.99% efficient on 0.3 microns or larger as defined by Federal Standard 209. Available models include 4003 Series Table Top Work Station and 4070 Fume Hoods. Models are suited for cleanroom, aerospace,...
Read More »Data-line Protectors operate beyond CAT 5 requirements.
Data-line Protectors offer full 20,000 watts of protection compared to industry norm of 1,500 watts. Units are tested repeatedly with 8/20 micro waveform at 6kV/3kA, without failure. Peak voltage seen at output is 33.2 V.
Read More »Solve Any Large-scale Water Control Problem with the Aqua Dam Flood Barrier
Aqua Dam is the ultimate solution for large-scale water control projects. It combines lightweight, large size, and portability all in one innovative product. To learn more about the uses, and applications of Aqua Dam, or to see it in action, check out our new video to get all the details.
Read More »