New Electrical Equipment & Systems Products

Valve-Regulated Batteries provide renewable energy storage.

VR Solar(R) 12 V modular units are suitable for standby systems requiring extended float. They allow for easy connection in series or parallel to match user requirements (12 to 120+ V). Batteries have long discharge capability allowing for consecutive days of usage and are capable of retaining maximum stored energy while in standby mode. They require no special ventilation and no watering.

Terminal Block suits 3-phase power supply applications.

WKN 70 provides grounded connection for large gauge wires from 6 to 2 AWG. It is constructed of polyamide 6.6 plastic housing rated to UL 94 V-0 standards for non-flammability. Each block is manufactured with universal DIN rail mounting foot, and ground connection is made immediately upon installation.

DC-to-DC Converters work with mobile equipment.

DC/DC converters for mobile laptop systems are suitable for medical, police/fire and mobile professionals as well as to other markets that call for heavy use of laptops.

Purge Cabinet offers roll-out shelves.

Nitrogen Purge Cabinet features sealed sides, back, and doors that can be made of plexiglass when visual control is required. Roll-out shelves provide easy access to all items being stored. Shelf sizes range up to 10 ft wide and 5 ft deep. Units can also be made completely out of stainless steel.

The Ultimate Guide To UV Disinfection Lighting

This white paper provides a guide to UV disinfection lighting and their benefits over alternative disinfection methods.

Rocker Switches suit high-current applications.

UL-, CSA-, and VDE-approved CR Series switches, with silver-alloy contacts, are rated for 20 A 125 Vac/16 A 250 Vac switching. CE-marked, compact 1 1/8 x 1/2 x 1 in. packages are available with a variety of colored rockers. Typical lighted designs employ neon bulbs. For non-lighted versions, options include single-throw, double-throw, and 2-color molded button, with red secondary color....

Drive Enclosure suited for outdoor HVAC applications.

NEMA Type 3R enclosure, designed for GPD 506/P5 AC drive, is free-standing, self-contained, and heat-resistant. It withstands harsh conditions in remote installations with no adverse effects on drive operation. Unit includes integral space heater; appropriately sized fans; fan rain hoods, filtered and shaped to protect from water ingestion; externally mounted heat sink with debris shield; and sun...

Flow Switch protects against flow variation.

Vane operated C-WD15-S0 is magnetically actuated and supplied with field adjustable multi-layer vanes for installation in pipes from 1 1/2 to 20 in. Unit fits directly into pipeline tee, thredolet, or flange and meets NEMA-4 watertight construction. It is explosion proof and withstands pressures to 2,000 psig. There are no bellows, springs, or seals to fail. C-WD15-S0 is suitable for fluids and...

Terminal Strip uses spring pressure termination.

Cage Clamp Compact Series 742 PCB terminal block offers choice of either knife disconnect or automotive mini-fuse. It is available with one, two, or three conductors, has pin spacing of 5 mm, and handles wire range of 12 to 28 AWG. Series 742 also offers jumpering capabilities and use of test plugs.

Enclosure supports 21-slot backplanes.

RME21 Pac-2000(TM) CoolSlot(TM) is available with 21-slot CompactPCIÃ-® PICMG 2.16, VME64x, or VME backplanes. Air deflecting card guides eliminate cooling dead spots on boards and provide uniform airflow throughout system. Air is provided by fan tray with cooling capacity of 85 W/slot. Power is provided by 1000 or 1600 W embedded power supply, or enclosure can be wired for three 600 W ac or...

Wall-Mount Power Adapters provide 5 to 36 Vdc output.

Over-voltage and short-circuit protected, external switching devices accept universal inputs of 90 to 264 Vac and provide 8 to 18 W power. EMI/RFI meets VDE/FCC Part 15/Level B, I/O isolation is 3000Vac, and line/load regulation is Ã-

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.