New DRMS Series Features Output Rating of 9 Amps at 480 VAC
Soft start/soft stop function allows for gradual increase or decrease of power control. Features include forward/reverse, adjustable settings for starting/deceleration torque, starting/deceleration ramp and nominal motor current. Ideal for access control, packaging equipment, lifts, escalators and machine tooling system applications.
Read More »
New RGTS Series Motor Soft-Starters are Designed to Control Induction Motors Up to 25A
The RGTS Series Motor Soft-Starters are based on wire bonding technology that reduces the thermal and mechanical stresses of output chips. The starters are controlled by 12-240 VAC line voltage and feature maximum current rating of 12, 16, or 25 AAC. The devices come with the built-in potentiometers and status indicating LEDs (green and orange). They are suitable for centrifugal pumps,...
Read More »
New Appleton PlexPower Motor Starters Eliminate the Need for Conduit Seals or Cable Glands
The Appleton PlexPower™ Motor Starters are fabricated from 316L stainless steel and are suitable for use in hazardous, wet or corrosive environments like oil refineries and chemical plants. The units can be configured in single or multiple motor starter designs for reducing the space requirements in control rooms. The quarter-turn latches allow operator to easily open the unit. The PlexPower™...
Read More »
RSGD Series Soft Starter is equipped with integrated push button.
RSGD Series Soft Starter is compatible with 3-phase induction AC motors. Unit offers operational current of 12 A up to 45 A, voltage from 220 VAC up to 600 VAC and horsepower rating up to 40 HP. Product comes with self-learning algorithm, two relay outputs and 24 VAC/VDC or 100-240VAC control voltage. Suitable for water treatment, agriculture, building automation and HVAC applications, soft...
Read More »
Managing the New FGD Wastewater Regulations
A guide for managing Flue Gas Desulfurization wastewater using leading technologies.
Read More »
EX9S32 Manual Motor Starter features built-in fault indicator.
Designed to perform functions such as manual motor control, branch-circuit short circuit protection, overload protection and switching (manual), EX9S32 Manual Motor Starter is available with up to 32A at 600 Vac rating. Offering power connection adapters, extended rotary lockable handle, undervoltage and shunt release contacts, unit meets UL 508 Type E standards.
Read More »
Effective Protection for Electric Motors and Loads
High-performance Simatic ET 200SP motor starter with new versions and functions Now particularly powerful with four adjustment ranges up to 5.5 kilowatts New fail-safe versions for a wide range of switching and monitoring tasks New functions, such as motor blocking protection and Quick Stop, for greater throughput, productivity and availability The Simatic ET 200SP motor starter protects...
Read More »
Self-Learning Soft Starters suit motor applications up to 100 hp.
Supporting use with AC induction motors up to 100 A, 75 mm wide RSGD Series (220–600 Vac) employs self-learning algorithm that works with different applications without requiring adjustment of initial torque. These 3-phase soft starters, along with integrated electronic overload protection, PTC input, and diagnostic functions, provide Modbus 2-wire serial communication protocol for...
Read More »
Self-Protected Motor Controllers protect multi-motor applications.
Series KTV7 combination motor controllers are intended for use with VFDs featuring output frequency of 400 Hz or less in multi-motor installations for such industries as food and beverage, material handling, and factory automation. With fixed magnetic trip and interruption ratings available up to 65KaIC at 400 and 480 V, these current limiting devices provide disconnect function for motor branch...
Read More »
Three-Phase Soft Starters suit water pumps up to 75 hp.
With RSWT Series, all 3 phases are controlled to achieve current balancing, minimizing inrush current as well as vibration during starting/stopping of centrifugal pumps. Through dedicated self-learning algorithm, series achieves smooth starting/stopping with minimal setting adjustments. V00/V01 type provides single adjustment setting for soft starting/stopping time, whereas V10/V11 type includes...
Read More »Rockwell Automation Brings SAB Maltings Into The Connected Enterprise
MILWAUKEEÂ- – Rockwell Automation recently supplied South African Breweries’ (SAB) first fully automated and networked EtherNet/IP-based control system for its new maltings plant in Alrode, South Africa. The new control system will integrate traditionally disparate, malt-production processes into a single, networked, EtherNet/IP-based solution to provide plantwide visibility and...
Read More »
Dies & Stamping Services with Over 25 Years of Experience
PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.
Read More »
