
New Bluetooth Remote Panel Comes with FXC Control App
Enables user to monitor and configure a FREEDOM X inverter or FREEDOM XC inverter/charger via FXC Control app. App displays voltage, current and frequency from both input and output sources. Displays fault and error codes and can send email feedback directly to customer service through app.
Read More »
New Integrated Panel Solutions Come with Waterproof Glands
Hardy’s Integrated Panel Solutions are offered in HI 4050, HI 6500, HI 6500-XP, or HI 6600 series models. The units come in 4 or 4X enclosures with pass through glands for power, communications, up to four sensors and up to three output cables. The panels are available with optional pre-installed/pre-wired display and Hardy HI6020IT summing card with connectors mounted in the back of enclosure...
Read More »
Power Distribution Panel steps down 480 Vac to 120/208Y Vac.
Portable MPD-25KVA-480-10X120.20A- safely converts 480- V AC 3-phase to 120 and 208Y V AC 3-phase electrical current and makes it available via ten 5-20R 20 A- GFCI protected duplex receptacles.- Line-in cable (25 ft) connects substation to- primary power supply, and 60 A fused disconnect provides primary line-in protection while also supplying primary power to 25 KVA transformer. Secondary...
Read More »
Customized Solutions from Zest Generator Sets Resolve Challenging Standby Power Supply Issues
Power outages have become increasingly frequent with a widespread knock on impact being experienced across industry. The ability to provide fit-for-purpose standby power solutions is the marque that has distinguished Zest WEG Group’s Generator Set Division. Standby power solutions can range from a single diesel driven generator set to a total standby power solution depending on the size of the...
Read More »
Metal Stamping for Lighting and Electronics Applications
This white paper provides an in-depth look into metal stamping for lighting and electronics applications.
Read More »DNF Controls Brings New Level of Controls to InfoComm 2016
LVCC North Hall #N762 Manufacturer to feature simple “Go-To” solutions designed to save time and budget and meet everyday needs of Pro AV applications Northridge, CA -- DNF Controls – the award-winning and established manufacturer of Human-to-Machine and Machine-to-Machine interfaces - is bringing 26 years experience designing off-the-shelf and custom control solutions to InfoComm.- The...
Read More »
Power Distribution System (10 KVA ) has 480 V welding receptacles.
Converting 480 Vac to single-phase 120 and 240 Vac, portable MGS-480.2X30A.2X60A-10K-2X240-10X120 safely enables industrial operators to tap into and utilize power sources independently of work area. There are 10 GFCI-protected, 20- A receptacles and 2 L6-30 receptacles. System also provides two 30 A, 480- V receptacles and two 60 A, 480- V receptacles for welding. Powder-coated, carbon steel...
Read More »DNF Controls NAB 2016 Product Preview
New Enhanced Products on Display at LVCC North Hall #1715 Northridge, Calif. -- DNF Controls – the award-winning and acknowledged leader in Human-to-Machine and Machine-to-Machine interfaces will be showing a number of new and enhanced device management products specifically designed to meet the real-world needs of our broadcast and content creation / distribution customers, said Dan Fogel,...
Read More »Solar Panels target commercial installations.
Featuring series of 72-cell modules, Mono X NeON™ 72 uses n-type double-sided cell structure, which allows light reflected from rear of modules to be reabsorbed. Models LG360N2W-B3 and LG365N2W-B3 deliver high-efficiency output up to 360 and 365 W, respectively, in 1,960 x 1,000 x 46 mm panel. Unlike p-type solar modules, n-type cells use phosphorous instead of boron in doping process,...
Read More »
Bentek to Exhibit New Residential, Commercial and Utility-Scale PV Products in Booth #3314 at SPI
SAN JOSE, CA- – Bentek, a manufacturer of a broad range of OEM power distribution products for the residential, commercial and utility-scale solar PV marketplaces, will exhibit in Booth #3314 at Solar Power International (SPI), scheduled to take place Sept. 14-17, 2015 at the Anaheim Convention Center in Anaheim, California. Bentek will introduce several new Electrical Balance of System (EBOS)...
Read More »
Power Distribution System (30 KVA) incorporates NEMA 3R panels.
Enabling operators in industrial settings to tap into power sources independent of work area, MGS-30KVA-6X120-2X240 operates with 480 Vac 3-phase and steps down to 120 Vac single-phase and 240 Vac 3-phase. Transformer, mounted to- 1/8 in.- thick diamond plate, makes 120 V available via 6 outlets and 240 V available via 2 outlets. To facilitate transport, distribution assembly is mounted onto 2...
Read More »
Micro Air's Dust, Fume, Mist Collection Equipment Facilitate a Safe Work Environment
Dust, fume, and mist collectors from Micro Air promote a safer, more productive work environment. Our wide array of products are available to the industrial manufacturing sector for processes such as welding, cutting, grinding, blasting, and more. Check out our video to learn more.
Read More »