Mechanical Components and Assemblies

Mounting Shaft Collars attach items to shafts, pipes, and tubes.
Shaft Collars

Mounting Shaft Collars attach items to shafts, pipes, and tubes.

Stafford Mounting Components feature shaft collar designs and mounting options that include face, flange, flat, and stackable. Ranging in size from 6 mm to 10 in. ID, parts are available in steel, stainless steel, and aluminum. Components, based on 1- and 2-piece and hinged shaft collars, include Accu-Clamp™ feature for applications requiring extreme squareness and flatness. For...

Read More »
Lubricated Compound replaces rubber in seals and gaskets.
Gaskets

Lubricated Compound replaces rubber in seals and gaskets.

Intended for use in seals for non-pressure water and drain pipe, Sarlink® 9156-02 thermoplastic vulcanizate (TPV) elastomer provides lubricity for accelerated insertion ofÂ- seals into fittings. Sealing force, retained over years, prolongs working lives of pipe seals, while stress relaxation, also maintained over years, optimizes sealing force....

Read More »
Bearings

Spherical Roller Bearings support vibratory applications.

Made from heat treated steel, SKF Explorer Bearings are suited for vibrating screens, compactors, road rollers, and similar end-uses operating with high vibration and exposed to contamination and/or poor lubrication. Units accommodate very heavy radial and axial loads in applications where misalignment or shaft deflections may occur. Bearings are available in wide range of bore sizes, with 2...

Read More »
Nanoparticle Containment Enclosures feature ductless design.
Containment Systems

Nanoparticle Containment Enclosures feature ductless design.

Designed to contain nanomaterial particles that are 100 nm or less in diameter, Purair® NANO Enclosures are suited for aerospace, research, and pharmaceutical applications. Units are constructed with stainless steel infrastructure, powder coated FFU, and dual filtration options. Available in 24, 36, or 48 in. widths, enclosures include filter clamping that eliminates bypass leakage, exhaust...

Read More »
Housings

Preformed Packing offers OEM replacement parts to aid maintenance.

Messier-Bugatti-Dowty part number BT34-5 consists of part of piston housing, which acts as sub-assembly of Carbon Brake Assembly. Latter is installed on left of right axle of main landing gear of various models of Boeing 777-200, 300, 300ER, 200LR, and F Series aircraft. FAA PMA replacement parts are available to promote cost reduction when maintaining SAFRAN, Messier-Bugatti-Dowty, Carbon Brake...

Read More »
World Chess Hall of Fame Chess Set to Feature Threaded Inserts from Yardley
Inserts

World Chess Hall of Fame Chess Set to Feature Threaded Inserts from Yardley

Yardley’s high quality threaded metal inserts are used for a wide range of fastening applications for OEMs and various other industries. You’ve seen them in outdoor furniture, RC jet boats, fighter jets, and much more. Now you’ll see them in a World Chess Hall of Fame chess set, “Royal Parts”! April Baker, an artist from Wisconsin, stepped out of the box and created a full chess set out...

Read More »
Deburring Equipment

ATI Industrial Automation's Annual Technology Fair Scheduled for August 11th, 2016

Apex, North Carolina: ATI Industrial Automation will host their Annual Technology Fair on Thursday, August 11th at the Michigan Sales Office located at 4577 South Lapeer Road, Suite I, Orion Township, MI 48359. This one-day event is a great educational opportunity for networking, sharing ideas, and also showcasing cutting-edge robotic and automation technologies. Multiple industry-leading experts...

Read More »
Toroidal Sealing Rings (O-Rings)

O-Ring operates in aircraft vacuum toilet assemblies.

Available as FAA PMA replacement part, O-Ring P/N 15800-359-8 is part of Zodiac 14330 Series Vacuum Toilet Assembly, 15800 Series Vacuum Toilet Assembly, and Zodiac Water and Waste Aero Systems 15800-150 Series Smart Toilet Assembly. Vacuum toilets are part of aircraft sanitation systems for in-flight and ground operations, and are installed in various Boeing, Embraer, and Airbus Series aircraft.

Read More »
The Toolholder for TECHnical Applications!
Tool Holders

The Toolholder for TECHnical Applications!

The TENDO-Tech is a line of special toolholders offered as standard from SCHUNK. These toolholders have technical features incorporated into the toolholder or are designed for a niche market or application, and are manufactured from the same high grade tool steel as our Platinum line. The TENDO-ES is extremely short and rigid and the tool shank is clamped inside the machine spindle taper. It is...

Read More »
Centerless Grinding Wheels minimize noise.
Wheels

Centerless Grinding Wheels minimize noise.

Available with ceramic, aluminum oxide, silicon carbide grain, and abrasive blends, Century 45™ Grinding Wheels feature centerless bond platform with exclusive chemistry that optimizes grain retention. Continually sharp face maximizes stock removal, minimizing grinding times through fewer passes. Capable of decreasing grinding noise levels by as much as 23.2 dB, wheels are suited for bar...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics