New Machinery & Machining Tools Products

Crimper is suitable for on site applications.

Model P16HP lightweight, portable crimper is suitable for on-site hose crimping where electricity is not available. It handles any hose up to 1 in. and has crimping range of 45 mm (max). Compact in size, P16HP has 95 tons of crimping force. Crimping diameter is set with turn dial control. Depending on model, operating force is supplied either by hand pump or by vehicle type battery. Retraction is...

Thermal Analysis System uses GC/MS to check polymers.

PY2020 system for company's QP Series GC/MS instruments enables selective analysis of polymers by pyrolysis, thermal desorption/pyrolysis, and evolved gas analysis (EGA). Pyrolysis can be used for macromolecular and other nonvolatile components. Thermal desorption/pyrolysis analyzes volatile compounds and EGA allows on-line MS analysis of compounds over wide programmed temperature range....

Thread Repair Kit can eliminate re-machining.

MRO Thread Repair Kit includes everything needed to repair damaged threads, including thread repair inserts, drill and tap, and installation tool. Kits are available with thread sizes from 1/4 to 1 in. and from 5 to 14 mm, in coarse or fine threads. Inserts have 2 or 4 locking keys, depending on size, to hold them in position in parent material. Insert is C1215 steel with locking keys...

Diemaking Rules offer wear resistance and bendability.

Dieflex Auto Rule is designed for automated rule bending equipment. It is edge-hardened and meets close height and thickness tolerances. Dieflex Ultra comes with friction reducing coating on cutting edge resulting in clean cutting with reduced slivers and dust. Dieflex Superbend provides minimum bending radius of 160Ã-

Direct Drive Linear Motors for Food/Beverage, Medical/Pharma & Packaging Applications

This eBook provides an overview of how direct drive linear motors can be an essential part of an efficient design ensuring the equipment operates and performs as intended.

Workholding Vise suits small machining centers.

CarvLock(TM) HDM6 2-station vise has overall length of 13.750 in. and is designed on 80,000 psi iron base. It produces approximately 11,000 lbs of clamping force at 100 lbs of torque with repeatable clamping to .001 in. Vise is available in 2-station pallet, 4-station tombstone (back-to-back), and 8-station towers, and in manual and hydraulic models for use on vertical and horizontal machining...

Oxygen Electrodes last longer in plasma cutting.

SilverPlus(TM) 200-amp silver/hafnium electrodes last up to 3 times longer than company's previous products. They fit company's Hypertherm HT2000, HT2000LHF LongLife, and MAX200 plasma cutting systems. Electrode has silver front end fused onto copper base. Hafnium emitter interfaces with silver, creating better adhesion and cooling than traditional copper interfaces. Hafnium erodes to...

Drill and Tap Holders have sealed ball-lock design.

Ball-lock drive technology provides fingertip control and tool changes as fast as 5 seconds. Six steel balls are mounted in spindle to retain and drive close-center drill holder. Balls fit into machined detents spaced 60Ã-

Inserts feature tip geometry that doubles tool's life.

Inserts are designed for use with ALORIS/YESTOOL line of Quick Tip Indexable Single Carbide Insert Drills. Insert life is doubled in 300 series stainless steel applications at rates of 160 sfm. Inserts are also recommended for use in Titatnium and Inconel. Sizes range from 8.0 to 50.8 mm in .1 mm increments. Drill bodies are available in flute lengths of 3x, 5x, and 7x length to diameter, and...

Automatic Chuck is air operated.

SquareOne AutoChuck bolts directly to most modern machines with C-axis. It has industry standard bolt pattern, porting for air blow off, holder sensing, and central flushing. Chuck provides accurate positioning and repeatability of holders, 90 deg indexing of all holders, and ability to maintain perfect concentricity when changing from large to small holders.

Heavy Duty Clamps hold more than five tons.

HDP Series Push-Pull style clamps have cast steel construction and produce enough force for light metal forming or assembly work such as swaging, riveting or press fitting components, and clamping. Several styles are available, including long L-handles which can be inserted in front or rear of clamp. Mechanism is inside base, which prevents stray objects and fingers from being caught. Holding...

Trotec Laser Offers Customizable Industrial Laser Marking Solutions for Any Application

Trotec's laser marking solutions provide your company with configurable workstations and intuitive, customizable software. Check out our video to learn more.