Machine Tool Accessory Kits come packaged in wooden case.
Kits include Wilton inspection packs, precision toolmakers vise and parallel kits, precision square kits, and toolmakers vise kits.
Read More »
Metric Punch and Die Set makes up to 44 shim combinations.
METRIC 10 TruPunchÃ-® self-centering punch and die set can make custom washers and shims with true metric sized I.D.s ad O.D.s. It offers ten size punches from 3 to 20 mm and nine I.D. sizes from 3 to 16 mm. All sets have self-centering pilot. METRIC 10 TruPunch cuts brass, copper, aluminum, rubber, and plastic up to .025 in. thick and stainless steel and blue tempered shim up to .010 in....
Read More »
Broach Set cuts keyways in small size bores.
No. 00 Precision Set has 3 broaches and 5 bushings that allow cutting 15 keyway combinations. Set includes high speed steel broaches, bushings, and shims capable of cutting 1/16, 3/32, and 1/8 in. keyways in bore sizes from 1/4 to 1/2 in. Push-type broaches can be used with any type hydraulic or hand-operated arbor press with adequate throat opening.
Read More »Dewatering System drys, cools, and screens.
Model 400 integrated, multi-step system for pelletizing lines combines dewatering, drying, cooling, dedusting, and screening into single unit. It delivers product moisture levels at 0.04% in nylon applications and 0.10% in polyethylene, polystyrene, polypropylene, polyvinyl chloride, polyesters, polyurethanes and other commodity and engineering resins. Suitable for friable, glass-filled, and...
Read More »
Metal Finishing Selection Guide
This unique chart compares different metal finishes by cost, corrosion resistance, applications and more.
Read More »
Recycling Separator has footprint equal to wastebasket.
Duo Recycler(TM) reduces post collection separation of contaminants. It has two compartments to separate daily trash, plastic, and recyclable office paper. Smaller compartment holds cans, plastic, string, and other office trash, and can be removed for daily disposal. Larger compartment holds approximately one week's paper accumulation. Molded of polypropylene, unit offers swiveling deflector lid...
Read More »
Vertical Mold Center has accuracy of less than 2 microns.
Model VL30A delivers cutting feed rates to 1,574 ipm with 1G acceleration/deceleration rate. Suitable for mold work and multi-axis contouring applications, unit includes 7.9 x 11.8 x 7.9 in. X, Y, Z axes envelope and 11.8 x 15.8 in. table size. Its 5.5 hp spindle accepts HSK25 tooling and provides spindle speeds up to 50,000 rpm. Precision glass scale feedback system detects 0.1 micron...
Read More »
Machining Center is suitable for machining turbine blades.
Model HU40-T Table on Table 5-axis machining center offers 20 in. part diameter (max) and 40-taper spindle rated to 12,000, 15,000, or 20,000 rpm or 30-taper up to 40,000 rpm. High-torque rotary drive provides acceleration from 0 to 30 rpm, and deceleration in less than 120 milliseconds. Heavy duty machine holds 0.00012 in. true position (ISO 230-2) through all linear axes and 0.001Ã-
Read More »
Multi-Axis Machining Center has highest accuracy available.
Model HU50-5AX Trunnion Table 5-axis CNC machining center holds 0.00012 in. true position (ISO 230-2) through all linear axes and 0.001Ã-
Read More »
EDM System incorporates dual-wire spooling.
Vertex wire-cut EDM system offers Agieduo(TM), which enables 2 different wire sizes to be changed without operator involvement. User can rough with large diameter wire and finish with small diameter. Vertex provides automatic threading of wires from 0.00078 to 0.008 in. dia through holes only 0.002 in. dia larger than wire itself. Thermally stabilized design, with precise (0.000004 in.) Dual...
Read More »
Rubber Extruders come in floor or tabletop versions.
Yellow Jacket processes rubber into extruded tubing, profiles, wire insulation, cable coating, sheet, film, and rod. Standard screw sizes are 5/8, 3/4, 1, 1 1/4, 1 1/2, 1 3/4, 2, 2 1/2, 3 1/2, and 4 1/2 in. Extruders have easy to clean, slide mounted roll for feeding rubber strips to extruder screw and ratio controlled drive system. Water-cooled feed sections are available in standard,...
Read More »
Do You Have Unique Lifting Needs?
EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.
Read More »
