New Machinery & Machining Tools Products

Ironworker offers 85 ton capacity punch.

Dual Operator Hydraulic Ironworker, Model 8514-20M features 14 in. throat depth and can punch 1 1/16 in. hole in 1 in. material. Two pumps insure full hydraulic pressure and speed to both operations. Machine includes 6 x 6 x Ã-½ in. angle shear, rod shear for round and square rod up to 1Ã-½ in. capacity, and rectangular notcher that can notch 2 x 4 in. through Ã-½ in. material. Flat...

Semi-Automatic Cold Saw has electric power down feed.

Circular cold saw CPO 350 PKPD features electric controls, electric valves, and electric remote foot pedal that enables operator to run machine from up to 10 ft away. Also included, independent feed rate and feed pressure controls optimize cutting speeds and blade life. Saw has 135Ã-

Ironworker provides 50 tons of pressure.

Model 5014 CM punches 13/16 in. hole in Ã-¾ in. material, 1Ã-¼ in. hole in Ã-½ in. material, and up to 2Ã-¼ in. hole in Ã-¼ in. material, using 4 x 6 in. die holder. It includes adjustable stroke control, electrical box with emergency palm button, lock-out/tag-out accommodations, 230/460 V 3-phase electrics, and keyed punch ram. Angle shear will shear up to 4 x 4 x 3/8 in. at...

Jigsaw Blades fit both universal- and Bosch-shank saws.

Unified Shank(TM) series utilizes proprietary, break-resistant Bi-Metal Unique(TM) Saw Technology and eliminates need to have different blades for different jigsaws. Line includes 6 blades for cutting wood, 4 for cutting metal, and 6 multi-purpose blades. After initial use, teeth develop groove in center of backing material. As a result, cutting stroke produces dual chips that facilitate removal...

How to Choose the Right Vacuum Chamber

To learn more about avoiding the pitfalls in choosing a vacuum chamber manufacturer and KTC's expertise in this area, download this white paper now.

Milling Chucks offer magnetic workholding.

Featuring electronically-activated permanent holding, Turbo-Mill(TM) MMC chucks can be disconnected from power supply for portability. They allow single set-up machining with 5-sided accessibility, and produce uniform holding over entire workpiece surface. Drilled and tapped holes in magnetic face facilitate positioning of riser blocks. Sizes range from 13.62 x 11.88 x 3.14 in. to 40.07 x 19.76 x...

Pentagonal Face Mills work with variety of materials.

ValMILL(TM) V555 Series inserts feature pentagonal shape with 5 cutting edges. Available in 6 cutter body diameters from 2-6 inches, products require 4-9 inserts each. Recommended max rpm ranges from 19,000-9,000, and depth of cut is 0.200 in. Suited for roughing, semi-finishing, and finish face or surface milling applications, face mills deliver consistent dimensional and surface qualities to...

Extended Flute End Mills are suited for slab milling.

ValMILL(TM) V595 end mills employ cutter body design and geometry that deliver smooth cutting action for consistent dimensional and surface finish results. Products are available in 8 models that use AP10 or AP13 inserts and Weldon or cylindrical shank configurations. Cutting diameters range from 1.000-2.000 in., depending on model. Available coatings include multi-layer PVD TiAlN/TiN and...

Hard Part Tooling System has insert and tooling options.

Capable of machining steels and alloys hardened to 45-62 Rc levels, ValEDGE(TM) utilizes proprietary ceramic and CBN inserts plus ValTURN(TM) ProGRIP(TM) family of toolholders. System takes advantage of stabilized microstructures and mechanical properties of materials while eliminating or reducing time consuming secondary finishing operations. It also provides tolerance and surface finish control...

End Mills provide plunge milling, drilling, and channeling.

ValMILL(TM) V520 drill/end mills are available in 0.826, 1.023, and 1.299 in. diameters with shank diameters of 0.750, 1.000, and 1.250 in., respectively. Units feature 2 identical trapezoidal inserts located in same axial plane, allowing 2 cutting edges for plunging and end milling operations. Inserts have PVD-coated, micrograin grade and top-face geometry for resistance to wear and thermal...

Lubrication System uses infrared photo sensor.

Infrared Lubrication System is equipped with solid-state PLC, 3-way solenoid valve, bank of PurgeXÃ-® pumps, power supply, and NEMA 12 enclosure. Independent pump operation allows individual adjustment of flow to each lube point from 0-.012 cu in./cycle. Clear, polycarbonate, Ã-½ gal reservoir, with hinged top lid, feeds system and allows for visual confirmation of fluid level. System is...

Reduce Time to Market, Improve System Uptime with Dedicated Computing Medical Solutions

Embedded computing solutions from Dedicated Computing are designed to meet unique and specific requirements. As the preferred supplier to leading healthcare OEMs, the Dedicated Computing team of expert engineers gets your product out to the market faster while helping your company avoid costly validation and verification steps. Check out our video to learn more.