Machinery & Machining Tools

Machinery & Machining Tools

Hornet™ Fusion Tool uses micro-processor controlled heaters.

May 11, 2017

Suitable for overhead and vertical fusions in tight spaces, Hornet™ Fusion Tool comes with V-base design making it to self-align on the center of pipe. Weighing 13 lb, product with small footprint can perform outlet fusions in any direction. Unit supports socket heaters and fusion outlet adapters from 20 mm to 63 mm on mains up to 630 mm.

Read More

Machinery & Machining Tools

Rotary Knife Cutter offers cuts in tightly controlled size ranges.

May 10, 2017

Equipped with rotor assembly with five full-length knives which cut materials against stationary bed knives, Rotary Knife Cutter is designed with perforated screen with apertures from 1.2 to 50.8 mm. Suitable for cutting grains, spices, roots and chips, unit’s rotor assembly rides on flange-block bearings and is powered by V-belt drive assembly. Designed with hinged doors for easy cleaning... Read More

Machinery & Machining Tools

Hi-M G1 Vertical Machining Center comes with dustproof spindle.

May 10, 2017

Designed with spindle coolant system, HSK–E40 spindle taper, 29.52 x 23.62 in. table and dust collector, Hi-M G1 Vertical Machining Center is used for cutting graphite. Reducing vibration, noise and power loss during high-speed rotation, unit’s spindle operates at speed of 24,000 rpm and is integrated with high power motor. Equipped with Siemens-828D Controller, product occupies 83.26 x... Read More

Labels Tags Signage & Equipment, Machinery & Machining Tools

Engraving System comes with operating software.

May 10, 2017

Suitable in engraving applications such as identification text, serial numbers, bar codes, corporate logos, 2D and 3D contours, colors and textures, FiberCube Compact Laser Engraving System comes with coordinated rotary motion devices.

Read More

Machinery & Machining Tools

Autani Debuts Ground-Breaking Fixture Conversion Kit at Lightfair 2017

May 10, 2017

COLUMBIA, Md., May 8, 2017 - Autani, LLC, a proven leader in building controls and IoT, will debut their e>kit fixture conversion kit at Lightfair International 2017, world's largest annual architectural and commercial lighting trade show and conference. Autani's e>kit converts existing prismatic fluorescent fixtures to LED fixtures with a simple one-piece kit. Flexible sizing... Read More

Machinery & Machining Tools, Material Handling & Storage

Key Technology Improves Nut and Dried Fruit Sorting with Pixel Fusion™

May 05, 2017

May 2, 2017 – Nut and dried fruit processors rely on Key Technology’s Pixel Fusion™ to meet the most stringent requirements for product quality and purity. By providing the clearest distinction between good product, shell, foreign material (FM), defects and different color grades, Pixel Fusion improves the accuracy of digital sorting. This effectiveness reduces the number of sorting... Read More

Machinery & Machining Tools

COMBICLICK® Quick-Change Disc System from PFERD Delivers Heightened Performance and Versatility

May 05, 2017

With its patented cooling and quick-mounting system backing pad, the versatile COMBICLICK® delivers lower workpiece temperatures, better surface contact, and longer disc life.

Milwaukee - The patented COMBICLICK® quick-change disc system from PFERD provides lower workpiece temperature while improving both stock removal and disc life. Designed for use with coated abrasive, non-woven... Read More

Machinery & Machining Tools

MC232 Perform Milling Cutters are available in 2, 3 and 4 flutes.

May 03, 2017

Designed in small diameters with cylindrical shank and larger diameters with weldon shank, MC232 Perform Solid Carbide Milling Cutters are suitable for lateral milling, full slotting, pocket milling, ramping and helical plunging operations. Featuring center cutting capability with 35° spiral, cutters are available in diameter range of 2 to 20 mm, cutters offer operation of different material... Read More

Machinery & Machining Tools, Materials & Material Processing

SEHO Provides Complete Solutions

May 03, 2017

Innovative Technology from SEHO

SEHO is the leading global manufacturer of complete solutions, providing innovative systems for all fields of automated soldering processes, solutions for automated optical solder joint inspection, and automized production lines including board handling, creative work places and intelligent material management. At SEHO we combine innovative engineering... Read More

Machinery & Machining Tools

Makita Hits Back Against Standard Fastening Bits with Impact X

May 03, 2017

ImpactX, a new line of impact-rated insert bits and acessories, is engineered for full-contact impact driving and longer service life

La Mirada, CA Makita® has created a new line of insert bits and fastening accessories engineered for use with high-torque impact drivers. ImpactX™ is built for pro contractors, and effectively fills the gap between higher-priced premium torsion bits... Read More

Machinery & Machining Tools

LTP-250 Micro-Press™ can be operated with or without dual temperature controller.

May 02, 2017

Used for applying heat and pressure to materials, LTP-250 Micro-Press™ features 75 mm x 75 mm platen area. Having heating temperature range ambient to 350°C, unit offers 680 Kg maximum applied force. Termperature control of each platen is done using dual temperature controller.

Read More

Machinery & Machining Tools

Jabro®-HFM End Mills are made of solid carbide material.

May 01, 2017

Jabro®-HFM End Mills are available in HFM JHF181, Solid² JS564 and JS565 models. Designed in 2, 4 and 5-flute options with cutting diameter from 2 mm to 16 mm and 2 x D to 7 x D length range, HFM JHF181 are suitable for hardened steels and nickel-based alloys. Providing high radial engagement, high feeds and speeds for optimized roughing passes, Solid² JS564 and JS565 models come with 3 mm... Read More

Chemicals & Chemical Processing, Machinery & Machining Tools

Contech CDS® Receives Canadian ETV Verification

Apr 28, 2017

WEST CHESTER, Ohio, April 4, 2017 - Contech® Engineered Solutions announced today that the CDS hydrodynamic separator has been verified through the Canadian Environmental Technology Verification (ETV) program.

The ETV program was created to support the implementation of innovative environmental technologies in Canada by providing an independent evaluation of technologies to validate... Read More

Machinery & Machining Tools

Rear Handle Circular Saws are equipped with Star Protection Computer Controls™.

Apr 27, 2017

Available in XSR01PT and XSR01Z models, 18V X2 (36V) LXT® Rear Handle Circular Saws comes with full 2-9/16 in. cutting capacity. Delivering 558 cuts in 2 x 4 SPF lumber and 291 cross cuts in 2 x 10 SPF lumber on a single charge with two 18V 5.0Ah batteries and 5.0Ah batteries respectively, unit’s blade measures 7-1/4 in. diameter and 12.4 lb of weight. Products are equipped with Extreme... Read More

Machinery & Machining Tools

GF Machining Solutions to Unveil Several New Machines at Open House

Apr 27, 2017

LINCOLNSHIRE, IL., April 25, 2017 – GF Machining Solutions will introduce seven brand new machines – two of which will be the heavy-duty AgieCharmilles CUT P 350/550/850 wire EDMs and the highly precise Mikron MILL P 900 vertical mill – at its upcoming Solutions Days event. Taking place June 6 – 7 at the Company’s U.S. Headquarters in Lincolnshire, Illinois, the event will also... Read More

Machinery & Machining Tools

VDO RoadLog Certified to Meet Compliance Requirements for the FMCSA ELD Mandate

Apr 26, 2017

• VDO RoadLog ELD (VDORoadLog.com) offers built-in printer; no monthly fees or contracts

Allentown, PA April 24, 2017. Continental, a leading global supplier of systems, components and tires to automobile, truck and bus manufacturers, and a world leader in Electronic Logging Device technology, has announced that its two innovative electronic logging... Read More

Machinery & Machining Tools

Flomatic Corporation is Proud to Announce that all Full Ported Globe Style Control Valves are Now NSF/ANSI Standard 61 Certified for Drinking Water Systems

Apr 26, 2017

Effective immediately all sizes and models will constructed with EPDM elastomers as standard. This change is a direct result of Flomatic receiving certification in compliance with “NSF/ANSI 61 – Drinking Water Standards”. For many years Flomatic has been committed to providing products that exceed the requirements for lead content and has excellent experience in manufacturing unleaded... Read More

Machinery & Machining Tools

DATAPAQ® EasyTrack®3 Data Logger features polycarbonate casing.

Apr 26, 2017

Capable of storing 18,000 readings per channel, DATAPAQ® EasyTrack®3 Data Logger uses 9 V replaceable batteries which provide more than 50 profiling runs. Featuring traffic light indicator, product is embedded with Insight™ Professional software for analyzing rise/fall, peak difference, area under curve calculation.

Read More

Machinery & Machining Tools

Angle Head Systems feature onboard braking system.

Apr 25, 2017

Available in Flex 5 and Flex 5 Plus models, Angle Head Systems come with saw blade flange with flush-mount ER25 nut and collet system. Providing 0 to 90 degrees sawing swivel range and 0 to 100 degrees routing swivel range, units use movement of C-axis for changing output angle. Offering rotation speed of 15,000 RPM and 1 to 1 gear ratio, angle heads offer 15 sec tool change output connections... Read More

Machinery & Machining Tools, Material Handling & Storage

BC40 Presto Black Finishing System produces satin black finishing.

Apr 24, 2017

Combining tank system, heaters, plumbing connections and tank lids, BC40 Presto Black Finishing System features seven individual tanks made of high density polypropylene and polyethylene with 16 x 24 x 24 in. deep dimensions. Offering uniform .000030 in. thickness, unit’s black finishing protects against corrosion and resists up to 1200 hours humidity without peeling. System comes in 3 x 15... Read More