New Electronic Components & Devices Products

FTIR Module integrates with variety of sample interfaces.

Illuminator M4500 is comprised of IR source and interferometer, which provide collimated output beam. It can be coupled with any sampling accessory equipped with its own IR detector to create dedicated analyzer. Internal IR source can be replaced with detector module for emissions work, or for use with external IR source. Data collection, post processing and report generation are provided by...

Depletion-Mode MOSFET features 700 V breakdown voltage.

With 42 ohm max on-resistance, DN2470 N-channel MOSFET minimizes power dissipation as well as voltage drops and is free from thermal runaway and thermally induced secondary breakdown. Depletion-mode allows construction of normally on solid-state relays and 2 terminal constant current sources. Breakdown voltage provides protection against high-voltage transients in NC solid-state relays, SMPS...

Security Acceleration Boards offer 155-524 Mbps performance.

Access HXL Security Acceleration Board Series consists of 6 half-height PCI cards designed to meet encryption requirements of OEM customers whose systems have space and form factor constraints. Based on 7954/7955/7956 security processors, boards can support compression and variety of bulk encryption algorithms to accelerate IPsec, SSL/TLS, and Wireless protocols. They include 32/64-bit PCI v2.2...

Surface-Mounted LED meets RoHS PB-free regulations.

Measuring 0.059 x 0.063 x 0.024 in., programmable RGB Model SMTC0606 employs 3 individually addressable LED die. Tri-chip design is comprised of single AlGaInP and 2 InGaN/SIC chip dies, featuring peak wavelengths of 635, 520, and 465 nm respectively. Lens appearance when off is water clear. Absolute maximum rating of forward current drive is 125 mA. Unit is encapsulated in epoxy blend to...

In-Mold Electronics

To learn more about in-hold electronics (IMEs) and solutions offered by Eastprint, Inc., download now.

VME Board suits SBC or DSP applications.

Air-cooled Manta DX combines single or dual Altivec(TM)-enabled 1.3 GHz PowerPC 7457 processors with on-board StarFabric(TM) bridge, which supports dual, full-duplex 2.5 Gbps links. Featuring SMP shared memory architecture, board includes Tundra Tsi148 VMEbus to PCI-X bus bridge, which supports 2eSST protocol and implements 2 edge source synchronous transfers for sustained VMEbus bandwidth...

DSP VMEbus Board features quad processors.

CHAMP-AV IV drives DSP applications with up to 48 GFLOPs of peak computational power. It features quad 1.5 GHz FreeScale MPC7448 PowerPC processors and QuadFlow architecture, which supports 4 simultaneous node-to-node transfers to deliver total data flow of 3.2 Gb/sec peak. Able to transfer data to adjacent nodes at speeds up to 1.6 Gb/sec peak, each processing node includes 256 Mb or 512 Mb...

Embedded Boards feature shared memory architecture.

SCRAMNet GT PMC, PCI, and VME boards deliver real-time control and data networking, and enable networked heterogeneous computers to function as single multi-processor system. They feature 2.5 Gbit/sec SFP transceiver with optional secondary SFP available to provide redundancy. Shared memory on each board starts at 128 Mb and supports data throughputs surpassing 200 Mbps. SCRAMNet GT boards...

Outlet/Patch Panel Jacks are color-coded and keyed.

Offered in 10 colors, MT-RJ SECURE Outlet and MT-RJ SECURE Patch Panel Jacks are no-epoxy, non-polish, no-crimp, reusable 2-fiber connectors that help users segregate multiple networks in same location. Color-coded and keyed jacks mate only with like-colored plugs to minimize connection to wrong networks and improper connection of segregated networks. Jacks are available for 50 micron, 62.5...

RF Active Mixers feature operating current of 28 mA.

With IIP3 (Input Third-Order Intercept) of 16.5 dBm @ 900 MHz and noise figure of 11 dB, LT5526 is suited for use as downconverting or upconverting mixer and operates over bandwidth from 100 kHz to 2 GHz. Model LT5525 features on-chip RF input transformer and offers internal 50 ohm impedance matching at RF and LO (Local Oscillator) inputs, which can be driven single-ended. It features IIP3 of 21...

I2C Serial Interface DAC comes in 3 x 3 mm DFN package.

Featuring double-buffered data latches and asynchronous DAC update pin, 16-Bit monotonic LTC2606 provides 400 kHz I2C interface with 27 user-selectable slave addresses. This allows multiple DACs on same bus and minimizes address conflicts with other components. Output buffer provides drive capability over 2.7-5.5 V supply range, and DAC output can directly drive capacitive loads up to 1,000 pF or...

SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection

Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.