New Electronic Components & Devices Products

White LED Driver delivers 700 mA with over 90% efficiency.

Inductorless fractional charge pump, Model LTC3215 features multi-mode architecture that automatically switches between 1, 1.5, or 2x boost modes by monitoring voltage across LED current source and switching modes only when ILED dropout is detected. Built-in soft-start circuitry prevents excessive inrush current during start-up. Housed in 3 x 3 mm, 10-lead DFN package, Model LTC3215 offers...

Power Amplifiers suit cellular base stations.

Half-watt Model RF3807 and 2 W Model RF3809 are single-stage GaAs HBT pre-driver amplifiers that operate across CDMA, GSM, DCS, PCS, and UMTS frequencies. Operating in UMTS frequency band, Model RF3807 provides +28.5 dBm output power, +40% power efficiency, and +42 dBm linearity, while Model RF3809 provides +33.5 dBm output power, +43% power efficiency, and +43 dBm linearity. Units are housed in...

Metal Resistor is suited for current sense applications.

Featuring open air design, BR Series flameproof current sense resistor has resistive element with off-board design that keeps hot spot safely off PC board. Product, rated from 1-5 W @ 85Ã-ºC, withstands up to 70 A of current and offers resistance values from 0.005-0.1 ohm. Series features tolerances down to Ã-

Communication Card offers isolation and surge protection.

Industrial-grade Universal PCI communication card, PCI-1610CU, features 4 RS-232 serial ports with 2,500 Vdc optical isolation and 2,500 Vdc surge protection. Compatible with 3.3 and 5 V PCI slots, product provides 9-wired RS-232 signaling with serial transmission rates up to 921.6 Kbps. It incorporates 16PCI954 UART chipset with 128-byte FIFO and is suited for operation in harsh environments.

Confused About Which Screw Drive Style to Choose? Don't Lose Your Head!

This white paper outlines the different types of screw head and drive designs.

Dual Function Varistor/Capacitor saves board space.

With response times of less than 25 ns, dual-function MV Series protects electronic equipment operating in low-voltage regions against voltage surges and high frequency noise. It incorporates varistor with dc voltage range from 3-125 V and by-pass capacitor with capacitance range of 10-1,000 nF. Available in 6 x 9 mm package, series withstands single pulse surge current of 150 A and demonstrates...

Dual ADCs achieve 100 MHz, 110 dB channel isolation.

Consuming 445 mW, 14-bit, 80 Msps LTC2299 provides -110 dB crosstalk for channel-to-channel isolation. It achieves 73 dB Signal-to-Noise Ratio (SNR) and 85 dB Spurious Free Dynamic Range (SFDR) @ 70 MHz. In higher intermediate frequencies, product achieves 72.6 dB SNR and 80 dB SFDR up to 140 MHz. Family also includes 10-, 12-, or 14-bit resolution models from 10-80 MSps that consume 120-422 mW....

High-Voltage Amplifier is suited for MEMS actuators.

Designed for use with Model 9070 MEMS Engine Driver System, Model 2375 features 4 channels, each rated for 20 mA continuous current with 0.2 ohm output impedance and independent voltage monitor output for use in closed loop system. Amplifier can drive capacitive loads up to 200 pF while maintaining full power bandwidth, exceeding 5 kHz. Product is suited for MEMS comb drives, cantilevered beams,...

Power Amplifier has bandwidth of DC to 2.0 MHz.

Manufactured in compact, rack-mountable chassis, Model 2348 meets requirements for MEMS testing, transducer characterization, and pulse applications. Independent, buffered, voltage monitor output reduces output signal to 20:1 for 50 ohm inputs and 10:1 for inputs exceeding 1 Megohm. Continuous current of 750 mA is available at voltages up to 50 Vp-p, providing 18.75 W of ac or dc output power to...

Communications Card features interchangeable, modular design.

Single-slot, multi-function, Model 64D1 VME Card can include 3 combinations of: 6 channels of Synchronous or Asynchronous RS-232C/RS-422/RS-485, 2 channels of Dual Redundant MIL-STD-1553 BC/RT/MT, 8 channels of Profibus, 48 channels of Discrete I/O, or 48 channels of TTL I/O. Each function is programmable at channel level. Featuring interchangeable, modular design, card provides diagnostics and...

Wire-to-Board Connector suits high-density applications.

GH disconnectable, crimp style connector series is available in 2-15 circuits rated 1.0 A @ 50 V ac/dc and accommodates wire sizes AWG No. 30-26. Top and side entry, .049 in. pitch, SMT connectors are polarized and have positive locking feature with audible click/tactile feedback. Fork-shaped header contacts are supported by grooves on housing walls designed to prevent deformation. Insulation OD...

Acoustic and Thermal Solutions for Original Equipment Manufacturers

Technicon's products solve the most complex noise pollution and thermal problems and improve product marketability. Check out the video to learn more.