New Electronic Components & Devices Products

Fiber Optic Module covers distances up to 2,000 m.

Targeted at industrial Ethernet use, X20 hub system has 100Base-FX underlying standard, and is based on duplex LC technology. There is no loss of performance (wire speed), as internal downgrading technology is not used. Unit also comes with 2 RJ45 connections.

PXI Digitizers support up to 512 MB of on-board memory.

Enabling accurate monitoring of high-speed transient signals, PXI-98x6 series is comprised of models PXI-9816, PXI-9826, and PXI-9846 that offer sampling rates of 10, 20, and 40 MS/sec, respectively. Products utilize PXI trigger bus to synchronize multiple modules without external routing or cabling. PXI-9816 offers signal-to-noise ratio of up to 78 dB and 12.6 effective number of bits with 1 MHz...

Metal Foil Resistors offer thermal EMF less than 0.1 -µV/-

Built on Bulk MetalÃ-® Foil technology, VSMP (0805-2512) series, VCS1625Z, and CSM2512S surface-mount resistors offer low TCR from Ã-

Radial Aluminum Capacitors offer long life up to 5,000 hr.

With low impedance (Z) value of 14 mW, ripple current of 3,800 mA, and capacitance up to 15,000 Ã-µF, EKX Series offer high-temperature operation to +105Ã-

How FRP Weighs Up

How FRP Weighs up against reinforced concrete, steel, and wood.

QFN Socket is designed for 0.5 mm pitch QFN 64 pin ICs.

Mountable on any existing PCB, SG-MLF-7028 is designed for 9 x 9 x 1.6 mm package size and operates at bandwidths up to 10 GHz with less than 1 dB of insertion loss. It is designed to dissipate up to several watts without extra heat sinking and can handle up to 100 W with custom heat sink. Unit features temperature range of -40 to +100Ã-

Display Driver is optimized for GIP-based LCD TVs.

Integrating high-speed operational amplifier to drive LCD backplane (VCOM), model MAX17108 enables implementation of gate-in-panel (GIP) technology in LCD panels. It includes 10-channel, level-shifting scan driver that can swing from -12 to +38 V and drive capacitive loads, and one linear regulator to provide internal bias for step-up controller. Amplifier features rail-to-rail outputs, Ã-

HB LED Driver supports green lighting designs.

Designed for boost, buck-boost, SEPIC, and high-side buck topologies, MAX16834 integrates high-side, current-sense amplifier, one PWM-dimming MOSFET driver, and protection circuitry. It achieves 3000:1 PWM-dimming range, and offers analog dimming that allows LED current to be controlled by external dc voltage. Providing more than 92% input power factor correction and thermal-foldback protection,...

Current-Sense Amplifier provides 1 -µA supply current.

Designed for battery-operated devices, MAX9610 features extended, 1.6-5.5 V input common-mode range. Product offers low 500 Ã-µV VOS and Ã-

High Current Inductor is offered in 6767 case size.

Featuring 17.15 x 17.65 mm footprint and 7.0 mm profile, IHLP-6767GZ-01 delivers maximum frequency to 2 MHz, DCR down to 0.63 m typical, and standard inductance values from 0.22-10 Ã-µH. It offers saturation current range of 25-129 A, heat rating current range from 12.5-44 A, and handles high transient current spikes without hard saturation. Specified for operating temperature of 55 to...

PCB Plug Connectors prevent errors during wire insertion.

Equipped with wire guard feature, BLZP Series 5.00 and 5.08 mm connectors prevent user from accidentally inserting wires under clamping mechanism. Units incorporate universal clamping screws that are compatible with standard flat or Philips screwdrivers. Optional release levers ensure wires are not pulled out accidentally while unmating them. Available in 2-24 poles, connectors are RoHS-compliant...

Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale

Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.