Electronic Components & Devices

UHF Connectors for Heliax-® Cable

UHF Connectors for Heliax-® Cable

Availability of UHF connectors for LDF4-50A Â-½ inch Andrew HeliaxÂ-® cable was limited to the secondary market when manufacturing ceased several years ago. RF Connectors division of RF Industries has released UHF male and UHF female connectors for LDF4-50A Â-½ inch cable to fill that need. These connectors utilize the same installation process and tooling required for the...

Read More »
Electro Standards Includes Specialty Fiber Cables and MIL Spec Cables in Its Expanding Custom Network Cable Line

Electro Standards Includes Specialty Fiber Cables and MIL Spec Cables in Its Expanding Custom Network Cable Line

Electro Standards Laboratories, Cranston, RI, announces the addition of MTPÂ-®/MPO 12-fiber fan-out cables, a high-density fiber MTP commercial conversion kit for M28876 military fiber system and circular MIL connector cable assemblies to its custom cable product line. The MTPÂ-®/MPO 12-fiber fan-out cables are offered in 62.5/125 micron multimode Simplex and Duplex in any lengths....

Read More »

Submounts and TVS Diodes increase UHB LED protection.

Intended for use in ultra high brightness (UHB) LED lighting applications, LuxGuard products include silicon submounts that provide integrated ESD protection at levels exceeding 15 kV HBM (Human Body Model) while also helping cushion LED from stress due to thermal expansion coefficient differences between LED and lead frame. TVS diodes, available for customers who utilize ceramic submounts, mount...

Read More »
Loop Converter bridges HART and analog signals.

Loop Converter bridges HART and analog signals.

Acting as transmitter power supply and HART monitor, HART Loop Converter (HLC) lets users access digital information from HART-enabled field devices and make it available to analog process control as 4-20 mA signals. Up to 3 HART signals can be monitored simultaneously and are provided as independent analog signals, or HLC can provide one signal via 3 analog channels to send to different systems....

Read More »
DAQ Board targets high speed embedded applications.

DAQ Board targets high speed embedded applications.

CellMiteÂ-® ProD features dual 24-bit independent strain gage channels with simultaneous sampling at 15 K samples/sec, and 12 additional 12-bit analog input channels with throughput of 1 M samples/sec. Supporting direct PC or network communication via USB, RS232, RS485, and Ethernet data channels, board offers 16-bit analog output channels with user specified scaling and offset, with range of...

Read More »
Male/Female 48-Pin DIN Connectors are rated at 6 A per pin.

Male/Female 48-Pin DIN Connectors are rated at 6 A per pin.

F Series female connector is available in standard card cage-mountable as well as low-profile back plane versions. Pin configurations include faston forks, which can have contacts soldered onto pin or connected to discrete wiring via faston crimp contact. Solder eyelet wire wrap and board solder pins are also available. Connector body, available with integrated coding and screw on mounting ears,...

Read More »
Lightning Arrestors target Wi-Fi and WiMAX applications.

Lightning Arrestors target Wi-Fi and WiMAX applications.

Optimized for 2.4-6 GHz 802.11/UNII/ISM applications, QSS 400 SurgeGuard(TM) series quarter wave stub lightning protectors are ruggedized, weatherproof to IP68 standards, and withstand multiple strikes and transients up to 60 kApk. Units offer bidirectional protection, 1.05 typical VSWR, normal/reverse polarity, high RF power, and ultra-low let-through. At 2.45 x 1.26 in. with N connectors, they...

Read More »

Connector/Splice Enlcosures offer security and durability.

LANscapeÂ-® Industrial Connector Housing (ICH) series accommodates conduit with concentric knockouts or rubber grommets. Units have padlock-capable outer door as well as separate inner door that protects provider side of unit from unauthorized access. Likewise-lockable Industrial Splice Housing (ISH) series is wall-mountable for transition splicing between cable at building entrance or...

Read More »
Gateway promotes industrial communication connectivity.

Gateway promotes industrial communication connectivity.

Based on netX chip, netTAP 100 can bridge gaps between traditional fieldbus, real-time Ethernet based systems, and serial protocols. It makes up to 1,000 protocol combinations possible from modular DIN-rail mounted housing and can be configured as master or slave on either end. USB port is used for configuration along with loading network firmware and diagnostics, and gateway also supports...

Read More »
USB Serial Adapter withstands challenging environments.

USB Serial Adapter withstands challenging environments.

Supplied in ruggedized, overmolded enclosure with 44 in. cable fully shielded against RFI/EMI, SeaLINKÂ-®+232-DB9 single-port USB to RS-232 serial adapter is powered by USB port and appears as standard COM port to host computer. Features include programmable baud rate, data formats with 128-byte transmit and 384-byte receive buffers, compatibility with all standard PC baud rates, and support...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics