New Electrical Equipment & Systems Products

Direct Drive Motors allows large through holes.

ULT Direct Drive motors are available in 64, 127, 165, and 190 mm O.D. with through holes up to 75% of OD. Peak torque is 1800 oz-in. Machine-wound stator coils optimize motor constant and keep axial length to minimum. Single-piece, multi-pole magnets are available with custom hubs, allowing simple integration into rotary stage design. Standard windings are available for 12, 24, and 48 V, and...

Digital DC Power Supply has adjustable limit controls.

Model 1761 utilizes 115 Vac outlet as its power source. Bench top unit provides accuracy of dual 4-digit LED resolution, 2 variable voltage outputs (00.00 Vac to 35.00 Vdc and 0.000 to 3.000 A), and one variable 2 to 6.5 Vdc, 5 A output. Front panel indicators and controls include Overload Indicator Light, Voltage Adjustment Knob, and current limit controls. Voltage meter resolution is 00.00 to...

Servo Drives are immune to phasing and electrical noise.

Kinetix(TM) 6000 servo drives offer fiber optic SERCOS interface digital drive link between drive and controller, which eliminates up to 18 discrete wires per axis. Built-in smart motor technology provides automatic identification of specific motor configurations. Units are available with 230 and 460 V ratings. Kinetix 6000 drives offer velocity bandwidth greater than 400 Hz and current-loop...

Interfaces offer high retention contacts.

Micro-Rugged Interfaces have shrouded and keyed insulators, and PCB terminations including press fit, solder locks, and mechanical hold-down options. Board-to-board interfaces are available on .050 in., 2 mm, and .100 in. pitch. Micro Card interfaces for .031 and .062 in. boards have terminations on .8 mm and 1 mm pitch. Standard and high speed IDC cable systems are available on .050 in., 2 mm,...

A Comprehensive Guide to E-Mobility and E-Aviation

This white paper provides a comprehensive guide to E-Mobility and E-Aviation.

DC/DC Converters employ 300 kHz frequency, buck topology.

LSN D3 Series SIPs are non-isolated DC/DC converters that accept 3.3 V inputs (3.0 to 3.6 V input range) and deliver 1, 1.2, 1.5, 1.8, 2, or 2.5 V outputs rated at 10 A. They employ single-in-line (SIP) packages that measure 2 x 0.55 x 0.34 in., and may be configured in vertical or horizontal orientations. Converters facilitate true point-of-use (point-of-load) power processing. Their on-board...

Power-Supply Accessory Kit is packaged in blister-pack case.

Model TLPS provides fully insulated alligator clips, standard alligator clips, and spade lug adapters. Retractile, sheathed banana plug connects to power supply, and fixed, sheathed banana plug protect users. Kit includes ready-made, silicone-jacketed, test-lead set for power supplies with remote sensing capabilities. Items meet IEC61010-032 international safety specifications to 1,000 V.

Alternator provides power for stick welding.

Power-Plus(R) Exciter(TM) TA-6/200-KBC provides 5.5 kVA of 115/230 Vac auxiliary power, 200 dc amps @ 60% duty-cycle welding output, and 12/24 V battery charger. Separate windings are used for welding and auxiliary power. Generator is powered by 15 hp, 1-cylinder, gas fueled, air-cooled engine. Alternator provides smooth weld output for STICK or scratch-start dc TIG welding applications. It fits...

Portable DC Inverter offers constant-current output.

Single-phase, 230/460 Vac, 50/60 Hz P-Wee(R) 250 GTS power source is designed for STICK, high frequency TIG, and Lift Start TIG welding applications. It includes adjustable hot start and automatically adjusts arc control for smooth operation with all electrodes. Standard controls include gas valve, built-in sloper, spot timer, pulser, and high-frequency starting. Fixed preflow is provided and...

Power Transformers meet CSA, UL, IEC, and VDE standards.

Series AU/BU Toroidal transformers convert 120/240V primary input to 6 to 120 V secondary output over range of 20 VA to 10 KVA. Applications include UPS systems, inverters/converters, fuel cells, power conditioners, and lighting equipment. Options include encapsulation, mounting, terminal strips, and additional shielding. Transformers are recognized under UL478, UL1446, UL6500, and UL544.

Connector adapts torch to cutting system.

SureLok(R) torch, with ATC(TM) Advanced Technology Connector, designed with sequential interface connections, allows end users to adapt cutting torches to almost any manufacturer's air-plasma cutting system. Torches with connector are available with outputs up to 100 amps. Connector is less than 2 in. in diameter.

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.